近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
H. Yu, W. Xu, S. van der Zwaag, On the Cobalt − Tungsten/Chromium Balance in Martensitic Creep Resistant Steels. Steel Research International 89, (2018).
H. Yu, W. Xu, S. van der Zwaag, On the Relationship between the Chromium Concentration, the Z-Phase Formation and the Creep Strength of Ferritic-Martensitic Steels. Steel Research International 89, (2018).
H. Yu, W. Xu, S. Van Der Zwaag, The Compositional Dependence of the Microstructure and Properties of CMSX-4 Superalloys. Metall and Mat Trans A 49, 406-416 (2018).
J. Hu et al., Ensuring combination of strength, ductility and toughness in medium-manganese steel through optimization of nano-scale metastable austenite. Materials Characterization 136, 20-28 (2018).
H. Farahani, W. Xu, S. van der Zwaag, A Novel Approach for Controlling the Band Formation in Medium Mn Steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 49, 1998-2010 (2018).
H. Farahani, W. Xu, S. van der Zwaag, Predicting the cooperative effect of Mn–Si and Mn–Mo on the incomplete bainite formation in quaternary Fe–C alloys. Philosophical Magazine Letters 98, 161-171 (2018).
Z. Yang et al., Predicting the Transition between Upper and Lower Bainite via a Gibbs Energy Balance Approach. Journal of Materials Science &Technology, (2017).
X. Xu, S. van der Zwaag, W. Xu, Abrasion resistance characterization of low alloy construction steels: A comparison between three different scratch test protocols. Wear 384–385, 106-113 (2017).
G.-z. W. Shan Chen, Chun Liu, Chen-chong Wang, Xian-ming Zhao, Wei Xu*, Correlation of isothermal bainite transformation and austenite stability in quenching and partitioning steels. ¸ÖÌúÑо¿Ñ§±¨(Ó¢ÎÄ°æ) 24, 1095-1103 (2017).
Q. Lu, S. van der Zwaag, W. Xu, Charting the ‘composition–strength’ space for novel austenitic, martensitic and ferritic creep resistant steels. Journal of Materials Science & Technology 33, 1577-1581 (2017).
B. He, W. Xu, M. Huang, Effect of boron on bainitic transformation kinetics after ausforming in low carbon steels. Journal of Materials Science & Technology 33, 1494-1503 (2017).
Z. Yang, W. Xu, Z. Yang, C. Zhang, S. Van Der Zwaag, A 2D analysis of the competition between the equiaxed ferritic and the bainitic morphology based on a Gibbs Energy Balance approach. Acta Materialia 105, 317-327 (2016).
X. Xu, S. van der Zwaag, W. Xu, The effect of martensite volume fraction on the scratch and abrasion resistance of a ferrite-martensite dual phase steel. Wear 348-349, 80-88 (2016).
X. Xu, S. van der Zwaag, W. Xu, The scratch and abrasive wear behaviour of a tempered martensitic construction steel and its dual phase variants. Wear 358-359, 80-88 (2016).
X. Xu, S. van der Zwaag, W. Xu, The effect of ferrite–martensite morphology on the scratch and abrasive wear behaviour of a dual phase construction steel. Wear 348–349, 148-157 (2016).
X. Xu, F. H. Ederveen, S. van der Zwaag, W. Xu, Correlating the abrasion resistance of low alloy steels to the standard mechanical properties: a statistical analysis over a larger data set. Wear in press, (2016).
Q. Lu, S. Van Der Zwaag, W. Xu, High-throughput design of low-activation, high-strength creep-resistant steels for nuclear-reactor applications. Journal of Nuclear Materials 469, 217-222 (2016).
Q. Lu et al., A Novel Martensitic Creep-Resistant Steel Strengthened by MX Carbonitrides with Extremely Low Coarsening Rates: Design and Characterization. Metallurgical and Materials Transactions E 3, 209-217 (2016).
B.B. He, W. Xu, M. X. Huang, Effect of boron on the bainitic transformation kinetics after ausforming. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science in press, (2016).
Z. Yang, W. Xu, Z. Yang, S. Van Der Zwaag, in PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. (2015), pp. 77-78.
X. Xu, S. van der Zwaag, W. Xu, A novel multi-pass dual-indenter scratch test to unravel abrasion damage formation in construction steels. Wear 322-323, 51-60 (2015).
X. Xu, S. van der Zwaag, W. Xu, Prediction of the abrasion resistance of construction steels on the basis of the subsurface deformation layer in a multi-pass dual-indenter scratch test. Wear 338-339, 47-53 (2015).
E. P. D. Silva et al., Isothermal transformations in advanced high strength steels below martensite start temperature. Materials Science and Technology 31, 808-816 (2015).
Q. Lu et al., in PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. (2015), pp. 1123-1124.
Q. Lu, Y. Toda, N. Harada, W. Xu, S. Van Der Zwaag, The impact of intended service temperature on the optimal composition of Laves and M23C6 precipitate strengthened ferritic creep resistant steels. Computational Materials Science 107, 110-115 (2015).
B. B. He, W. Xu, M. X. Huang, Effect of ausforming temperature and strain on the bainitic transformation kinetics of a low carbon boron steel. Philosophical Magazine 95, 1150-1163 (2015).
H. Farahani, W. Xu, S. Van Der Zwaag, in PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. (2015), pp. 925-926.
H. Farahani, W. Xu, S. van der Zwaag, Prediction and Validation of the Austenite Phase Fraction upon Intercritical Annealing of Medium Mn Steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 46, 4978-4985 (2015).
D. De Knijf et al., In situ austenite–martensite interface mobility study during annealing. Acta Materialia 90, 161-168 (2015).
L. Bracke, W. Xu, T. Waterschoot, in Materials Today: Proceedings. (2015), vol. 2, pp. S659-S662.
L. Bracke, W. Xu, Effect of the cr content and coiling temperature on the properties of hot rolled high strength lower bainitic steel. ISIJ International 55, 2206-2211 (2015).
E. Pinto Da Silva et al., Phase transformations during the decomposition of austenite below M s in a low-carbon steel. Materials Characterization 95, 85-93 (2014).
Q. Lu, W. Xu, S. V. D. Zwaag, Designing new corrosion resistant ferritic heat resistant steel based on optimal solid solution strengthening and minimisation of undesirable microstructural components. Computational Materials Science 84, 198-205 (2014).
Q. Lu, W. Xu, S. Van Der Zwaag, in Advances in Materials Technology for Fossil Power Plants - Proceedings from the 7th International Conference. (2014), pp. 1441-1452.
Q. Lu, W. Xu, S. van der Zwaag, in Advanced Materials Research. (2014), vol. 783-786, pp. 1201-1206.
Q. Lu, W. Xu, S. van der Zwaag, The Computational Design of W and Co-Containing Creep-Resistant Steels with Barely Coarsening Laves Phase and M23C6as the Strengthening Precipitates. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 45, 6067-6074 (2014).
Q. Lu, W. Xu, S. Van Der Zwaag, A strain-based computational design of creep-resistant steels. Acta Materialia 64, 133-143 (2014).
Q. Lu, W. Xu, S. Van Der Zwaag, The design of a compositionally robust martensitic creep-resistant steel with an optimized combination of precipitation hardening and solid-solution strengthening for high-temperature use. Acta Materialia 77, 310-323 (2014).
B. B. He, W. Xu, M. X. Huang, Increase of martensite start temperature after small deformation of austenite. Materials Science and Engineering: A 609, 141-146 (2014).
D. Dilner et al., Process-time optimization of vacuum degassing using a genetic alloy design approach. Materials 7, 7997-8011 (2014).
E. P. da Silva et al., in Advanced Materials Research. (2014), vol. 922, pp. 682-687.
E. P. Da Silva et al., in METAL 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings. (2014), pp. 528-533.
H. Chen, X. Xu, W. Xu, S. Van Der Zwaag, Predicting the austenite fraction after intercritical annealing in lean steels as a function of the initial microstructure. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 45, 1675-1679 (2014).
H. L. Yi et al., A novel design: Partitioning achieved by quenching and tempering (Q–T & P) in an aluminium-added low-density steel. ScriptaMaterialia 68, 370-374 (2013).
X. Xu, W. Xu, F. H. Ederveen, S. V. D. Zwaag, Design of low hardness abrasion resistant steels. Wear 301, 89-93 (2013).
Q. Lu, W. Xu, S. Van Der Zwaag, in THERMEC 13. (Las Vegas, USA, 2013).
Q. Lu, W. Xu, S. Van Der Zwaag, in TMS Annual Meeting. (2013), pp. 327-334.
Q. Lu, W. Xu, S. Van Der Zwaag, Computational design of precipitation strengthened austenitic heat-resistant steels. Philosophical Magazine 93, 3391-3412 (2013).
E. P. Da Silva et al., in Thermec 13. (Las vegas, USA, 2013).
W. Xu, Q. Lu, X. Xu, S. van der Zwaag, The structure of a general materials genome approach to the design of new steel grades for specific properties. Computer Method in Materials Science 13, 382-394 (2012).
H. Chen, W. Xu, M. Goune, S. Van Der Zwaag, Application of the stagnant stage concept for monitoring Mn partitioning at the austenite-ferrite interface in the intercritical region for Fe-Mn-C alloys. Philosophical Magazine Letters 92, 547-555 (2012).
W. Xu, S. Van Der Zwaag, Property and cost optimisation of novel UHS stainless steels via a genetic alloy design approach. ISIJ International 51, 1005-1010 (2011).
P. E. J. Rivera-Diaz-Del-Castillo, W. Xu, Heat treatment and composition optimization of nanoprecipitation hardened alloys. Materials and Manufacturing Processes 26, 375-381 (2011).
W. Xu et al., A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates. Acta Materialia 58, 4067-4075 (2010).
W. Xu et al., Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by Ni3Ti intermetallic nanoprecipitates. Acta Materialia 58, 3582-3593 (2010).
P. E. J. Rivera-Díaz-del-Castillo, W. Xu, S. Van Der Zwaag, in Materials Science Forum. (2010), vol. 638-642, pp. 3473-3478.
W. Xu, P. E. J. Rivera-Diaz-Del-Castillo, S. Van Der Zwaag, Computational design of UHS maraging stainless steels incorporating composition as well as austenitisation and ageing temperatures as optimisation parameters. Philosophical Magazine 89, 1647-1661 (2009).
W. Xu, P. R. D. Del Castillo, K. Yang, W. Yan, S. Van Der Zwaag, in TMS Annual Meeting. (2009), pp. 319-326.
W. Xu, P. R. D. Del Castillo, S. Van Der Zwaag, in 6th European Stainless Steels Conference. (Helsinki, Finland, 2009), pp. 259-267.
W. Xu, P. E. J. R. D. D. Castillo, S. V. D. Zwaag, The composition and temperature effects on the ultra high strength stainless steel design. International Journal of Modern Physics B 23, 1060-1065 (2009).
W. Xu, P. E. J. R. D. d. Castillo, S. v. d. Zwaag, A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels. Computational Materials Science 45, 467-473 (2009).
W. Xu, P. E. J. Rivera-Díaz-del-Castillo, S. van der Zwaag, Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics. Computational Materials Science 44, 678-689 (2008).
W. Xu, P. E. J. Rivera-Diaz-Del-Castillo, S. Van Der Zwaag, Genetic alloy design based on thermodynamics and kinetics. Philosophical Magazine 88, 1825-1833 (2008).
W. Xu, P. E. J. R. D. Del Castillo, S. Van Der Zwaag, in New Developments on Metallurgy and Applications of High Strength Steels, Buenos Aires 2008 - Proc. Int. Conf. New Developments on Metallurgy and Applications of High Strength Steels. (2008), vol. 2 Physical Metallurgy and Alloy Design, pp. 1167-1181.
W. Xu, D. San Martin, P. E. J. Rivera Díaz del Castillo, S. van der Zwaag, Modelling and characterization of chi-phase grain boundary precipitation during aging of Fe-Cr-Ni-Mo stainless steel. Materials Science and Engineering A 467, 24-32 (2007).
W. Xu, D. San Martin, P. E. J. Rivera Diaz Del Castillo, S. Van Der Zwaag, in Advanced Materials Research. (2007), vol. 15-17, pp. 531-536.
W. Xu, P. E. J. Rivera-Díaz-Del-Castillo, S. Van Der Zwaag, Ferrite/pearlite band prevention in dual phase and TRIP steels: Model development. ISIJ International 45, 380-387 (2005).
P. E. J. Rivera-Díaz-Del-Castillo, P. Reischig, W. Xu, S. Van Der Zwaag, Theory for diffusional transformation kinetics: Multicomponent and multiphase systems. ScriptaMaterialia 53, 1089-1094 (2005).
W. Huang, W. Xu, Y. Xia, Effect of strain rate on the mechanical behaviors of SiC fiber. Journal of Materials Science 40, 465-468 (2005).
P. E. J. R. D. Del Castillo, W. Xu, S. Van Der Zwaag, in Proceedings of an International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005. (2005), vol. 2, pp. 801-810.
京公网安备 11010802027423号