近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1] Jiang, Wen-Bin.Scanning Electron Microscopic Observation of Myodural Bridge in the Human Suboccipital Region[J],SPINE,2021,45(20):E1296-E1301
[2] 马国军.封闭加固型计算机板卡锁紧结构接触热阻分析[J],东北大学学报(自然科学版),2021,41(12):1747-1753
[3] 张志宏.犬肌硬膜桥的扫描电子显微镜观察[J],解剖学报,2021,51(6):929-933
[4] 马国军,吴承伟.人造微针与生物微针研究进展[J],医用生物力学,2011,26(6):487-493
[5] Ma, Guojun,Wu, Chengwei.Microneedle, bio-microneedle and bio-inspired microneedle: A review[J],JOURNAL OF CONTROLLED RELEASE,2017,251:11-23
[6] Liu, B.,Wei, M. Y.,Ma, G. J.,Zhang, W.,Wu, C. W..Stepwise optimization of endplate of fuel cell stack assembled by steel belts[J],INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,2016,41(4):2911-2918
[7] 郝建国,张忠和,马国军,胡冰,王强,李广田,牛珊,蒋申柱.08Ni3D锻钢焊接工艺及低温力学性能试验[J],焊接技术,2016,01:36-39+2
[8] 张伟,马国军,吴承伟.Shape optimization of energy storage flywheel rotor[J],Struct Multidisc Optim,2016,55(2):739-750
[9] 马国军,谭鑫,吴承伟,高俊福,郭峰.压缩机主轴-叶轮摩擦性能及过盈装配主轴弯曲变形研究[J],大连理工大学学报,2015,55(6):575-581
[10] Li, Rui,Ye, Hongfei,Zhang, Weisheng,Ma, Guojun,Su, Yewang.An analytic model for accurate spring constant calibration of rectangular atomic force microscope [J],SCIENTIFIC REPORTS,2015,5:15828
[11] 呼东亮,马国军,吴承伟.微针阵列刺入皮肤实验模拟及仿真[A],2015,290-290
[12] 张忠和,马国军,王飞宇,张尔康,牛珊,郭杨,王志强,郝春娜.08 Ni3 D锻钢热处理后的低温力学性能[J],金属热处理,2015,40(7):82-85
[13] Zhao, Zi-Long,Zhao, Hong-Ping,Ma, Guo-Jun,Wu, Cheng-Wei,Yang, Kai,Feng, Xi-Qiao.Structures, properties, and functions of the stings of honey bees and paper wasps: a comparative s[J],BIOLOGY OPEN,2015,4(7):921-928
[14] 张忠和,王飞宇,张尔康,牛珊,车欣,马国军,赵亮.高强度马氏体沉淀硬化不锈钢的低温力学性能[J],金属热处理,2014,39(10):42-46
[15] Zuo X.,Ma G.,Wu C.,Zhang W..Dispersion of carbon nanotubes with organic dyes[A],2014,1:37-40
[16] Zhang, W.,Ma, G. J.,Wu, C. W..ANTI-FRICTION, WEAR-PROOF AND SELF-LUBRICATION APPLICATION OF CARBON NANOTUBES[J],REVIEWS ON ADVANCED MATERIALS SCIENCE,2014,36(1):75-88
[17] 张伟,马国军,吴承伟.The effect of alkyl chain in quaternary ammonium dispersants on the suspension of multi-walled carbo[J],Aperito Journal of Nanoscience and Nanotechnology,2014,1(1):1-6
[18] 郭杏林,马国军.连续体结构裂纹识别的Kriging 代理模型求解策略[J],振动工程学报,2013,26(16):879-885
[19] 马国军,吴承伟.微针设计与刺入过程力学问题研究进[J],力学进展,2012,42(3):314-333
[20] 马国军,吴承伟.Micronanostructures and Mechanical Property of mosquito fascicle[A],2012,1-2
[21] 马国军,吴承伟.Numerical study of the impact response of woodpeckers head[J],AIP ADVANCES,2012,2(1):42173-42173
[22] 郭杏林,马国军,吴承伟.Rapid Measurement of Fatigue Behavior of Welded Joints Using the Lock-in Infrared Thermography[A],2012
[23] Ma, G. J.,Shi, L. T.,Wu, C. W..Biomechanical Property of a Natural Microneedle: The Caterpillar Spine[J],JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME,2011,5(3)
[24] 马国军,吴承伟.微针设计与刺入过程力学问题研究进展[J],力学进展,2011,26(6):487-493
[25] 马国军,吴承伟.生物与人造微针研究进展[J],生物医用力学,2011,26(6):552-558
[26] Shi, L. T.,Jiang, C. G.,Ma, G. J.,Wu, C. W..Electric field assisted manipulation of microdroplets on a superhydrophobic surface[J],BIOMICROFLUIDICS,2010,4(4):41101
[27] 马国军,吴承伟,张晨朝,史立涛.生物微针的力学行为[A],2010,9
[28] 马国军,吴承伟.Micronanostructures, mechanical property and penetrating skills of mosquito biomicroneedles[A],2010
[29] Wu, C. W.,Liu, T. X.,Ma, G. J..Effect of an electric field applied during the quenching on hardness of carbon steel[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2008,489(1-2):62-64
[30] 吴承伟,马国军,周平.流体流动的边界滑移问题研究进展[J],力学进展,2008,38(3):265-282
[31] Ma, G. J.,Wu, C. W.,Zhou, P..Influence of Wall Slip on the Dynamic Properties of a Rotor-Bearing System[J],TRIBOLOGY TRANSACTIONS,2008,51(2):204-212
[32] 马国军,吴承伟,周平.滑移楔流体动力学及其表面滑移特性优化[J],中国科学. G辑, 物理学，力学，天文学,2008,38(1):67-76
[33] 吴承伟,马国军.复合表面径向滑动轴承的概念和性能预报[J],计算力学学报,2008,24(1):1-6
[34] 周平,吴承伟,马国军.非线性边界滑移挤压膜流动[J],应用数学和力学,2006,27(9):1129-1134
京公网安备 11010802027423号