郭杏林 - 大连理工大学 - 工业装备结构分析国家重点实验室

个人简介

教育经历 1996.9 2003.12 大连理工大学计算力学博士 1985.9 1988.7 大连理工大学固体力学硕士 1978.3 1982.2 大连工学院工程力学学士工作经历 1982.3 至今大连理工大学教师 1975.3 1978.2 大连手表厂工人专利一种用强磁场增强镍铝系合金的强度和韧性的方法科研项目阀门固有频率试验、地震试验及端部加载试验, 企事业单位委托科技项目, 2017/11/15-2018/05/15, 进行阀门振动试验、地震试验及端部加载试验, 企事业单位委托科技项目, 2016/12/16-2017/12/16, 进行风电齿轮箱内置主轴超声波检测, 企事业单位委托科技项目, 2017/03/21-2020/12/31, 进行 ADS自动降压系统截止阀, 企事业单位委托科技项目, 2015/12/20-2016/05/31, 进行基于热像法的纯铜疲劳性能评估, 企事业单位委托科技项目, 2016/02/20-2016/04/30, 进行 DN300高温气冷堆主蒸汽隔离阀端部加载、地震试验及自振频率分析, 企事业单位委托科技项目, 2014/12/16-2015/12/16, 进行授课信息固体力学实验1 /2019-2020 /夏学期 /32课时 /1.5学分 /1210040700 固体力学实验2 /2019-2020 /夏学期 /36课时 /2.0学分 /1210040550 固体力学实验2 /2019-2020 /夏学期 /36课时 /2.0学分 /1040145030 固体力学实验1 /2019-2020 /秋学期 /32课时 /1.5学分 /1040145020 固体力学实验1 /2019-2020 /秋学期 /32课时 /1.5学分 /1040145020 固体力学实验1 /2018-2019 /秋学期 /32课时 /1.5学分 /1040145020 科研奖励沈阳市科技进步奖华夏建设科学技术奖一等奖

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1]Wu, Wenhua,Lyu, Baicheng,Yao, Ji,Yue, Qianjin,Zhang Yantao,Guo, Xinglin.STUDY ON THE MULTI-BODY DYNAMIC CHARACTERISTICS OF FPSO SOFT YOKE MOORING SYSTEM BASED ON SYMPL...[A],2019 [2]Guo, Qiang,Zairi, Fahmi,Rodas, Cristian Ovalle,Guo, Xinglin.Constitutive modeling of the cyclic dissipation in thin and thick rubber specimens[J],ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK,2018,98(10):1878-1899 [3]Guo, Qiang,Zairi, Fahmi,Guo, Xinglin.Thermodynamics and mechanics of stretch-induced crystallization in rubbers[J],PHYSICAL REVIEW E,2018,97(5):052501 [4]Guo, Qiang,Zairi, Fahmi,Guo, Xinglin.An intrinsic dissipation model for high-cycle fatigue life prediction[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2018,140:163-171 [5]Guo, Qiang,Zairi, Fahmi,Guo, Xinglin.A thermo-viscoelastic-damage constitutive model for cyclically loaded rubbers. Part II: Experim...[J],INTERNATIONAL JOURNAL OF PLASTICITY,2018,101:58-73 [6]Guo, Qiang,Zairi, Fahmi,Guo, Xinglin.A thermo-viscoelastic-damage constitutive model for cyclically loaded rubbers. Part I: Model fo...[J],INTERNATIONAL JOURNAL OF PLASTICITY,2018,101:106-124 [7]Zhao, Dewang,Ren, Daxin,Zhao, Kunmin,Pan, Sun,Guo, Xinglin.Effect of welding parameters on tensile strength of ultrasonic spot welded joints of aluminum t...[J],JOURNAL OF MANUFACTURING PROCESSES,2017,30:63-74 [8]Yang, Xiuming,Guo, Xinglin,Ouyang, Huajiang,Li, Dongsheng.A Kriging Model Based Finite Element Model Updating Method for Damage Detection[J],APPLIED SCIENCES-BASEL,2017,7(10) [9]王睿,郭杏林.轴承-转子系统在基础运动作用时的非线性分析[J],计算力学学报,2017,34(2):155-161 [10]Ren, Mingfa,Cong, Jie,Wang, Bo,Guo, Xinglin.Extended multiscale finite element method for small-deflection analysis of thin composite plate...[J],COMPOSITE STRUCTURES,2017,160:422-434 [11]郭杏林,欧阳华江,李东升.A new frequency matching technique for FRF-based model updating[A],2017 [12]赵德望,任大鑫,赵坤民,郭杏林,杨文平.工艺参数对镁钛异质金属超声波点焊接头拉伸性能及疲劳性能的影响[J],机械工程学报,2017,53(24):118-125 [13]胡世武,郭杏林,郭强.一种改进的耗散型接触力模型及实验验证[J],大连理工大学学报,2016,56(3):221-229 [14]Wang, Rui,Guo, Xinglin,Wang, Yuefang.Nonlinear analysis of rotor system supported by oil lubricated bearings subjected to base movem...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2016,230(4):543-558 [15]Guo, Qiang,Guo, Xinglin.Research on high-cycle fatigue behavior of FV520B stainless steel based on intrinsic dissipatio...[J],MATERIALS & DESIGN,2016,90:248-255 [16]张伟,郭杏林,吴承伟.Effect of surface structure of flywheel on drag reduction[A],2016 [17]Guo, Qiang,Guo, Xinglin,Fan, Junling,Syed, Rizwanulhaque,Wu, Chengwei.An energy method for rapid evaluation of high-cycle fatigue parameters based on intrinsic dissi...[J],INTERNATIONAL JOURNAL OF FATIGUE,2015,80:136-144 [18]Hu, Shiwu,Guo, Xinglin.A dissipative contact force model for impact analysis in multibody dynamics[J],MULTIBODY SYSTEM DYNAMICS,2015,35(2):131-151 [19]樊俊铃,郭强,赵延广,郭杏林.基于有限元法和锁相热像法对含缺陷构件的应力分析与疲劳性能评估[J],材料工程,2015,43(8):62-71 [20]郭强,郭杏林.基于固有耗散的高周疲劳损伤机理研究[A],2015,93-93 [21]胡世武,郭杏林.含双间隙连杆机构动力学仿真与实验[J],计算力学学报,2015,32(4):548-553 [22]郭强,郭杏林,樊俊铃,吴承伟.基于固有耗散的FV520B钢高周疲劳性能研究[J],金属学报,2015,51(04):400-406 [23]Fan, J.,Guo, X.,Wu, C.,Crupi, V.,Guglielmino, E..Influence of Heat Treatments on Mechanical Behavior of FV520B Steel[J],EXPERIMENTAL TECHNIQUES,2015,39(2):55-64 [24]郭杏林.Multi-damage localization in plate structure using frequency response[A],2015 [25]李东升,周翠,杨新涛,李宏男,任亮,郭杏林.结构损伤识别中部分相关噪声模型[J],大连理工大学学报,2014,54(4):445-451 [26]郭强,郭杏林,樊俊铃,侯培军,吴承伟.基于固有耗散的材料疲劳性能快速评估方法[J],力学学报,2014,46(6):931-939 [27]李东升,李宏男,任亮,郭杏林.结构损伤识别中的部分相关噪声模型[J],大连理工学学报,2014,54(4):445-451 [28]Hou P.,Fan J.,Guo Q.,Guo X..The application of the infrared thermography on titanium alloy for studying fatigue behavior[J],Frattura ed Integrita Strutturale,2014,8(27):21-27 [29]周芒,刘敏,郑建勇,李姿琳,司会柳,杨明,郭杏林,高海洋,关振群.导管随机振动响应分析与实验验证[J],强度与环境,2013,5:30-36 [30]Gao, Haiyang,Guo, Xinglin,Ouyang, Huajiang,Han, Fang.Crack Identification of Cantilever Plates Based on a Kriging Surrogate Model[J],JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME,2013,135(5) [31]樊俊铃,郭杏林,吴承伟.FV520B不锈钢角焊缝接头的组织和断裂机理[J],材料工程,2013,7:1-5,91 [32]Hou P.J.,Guo X.L.,Han F.,Fan J.L..Fatigue damage indicators based on the infrared thermographic method[A],2013,3:2088-2093 [33]Hou P.J.,Guo X.L.,Fan J.L..Investigation of fatigue properties of titanium alloy applying variational infrared thermography[A],2013,8:171-176 [34]Han, Fang,Guo, Xinglin,Gao, Haiyang.Bearing parameter identification of rotor-bearing system based on Kriging surrogate model and e...[J],JOURNAL OF SOUND AND VIBRATION,2013,332(11):2659-2671 [35]韩放,郭杏林,高海洋.非线性油膜力作用下叶片-转子-轴承系统弯扭耦合振动特性研究[J],工程力学,2013,30(4):355 [36]郭杏林.Investigation of fatigue properties of titanium alloy applying variational infrared thermography[A],2013 [37]郭杏林,马国军.连续体结构裂纹识别的Kriging 代理模型求解策略[J],振动工程学报,2013,26(16):879-885 [38]郭杏林,吴承伟.Microstructures and fracture mechanisms of fillet welded joints of FV520B steel[A],2013,569:839-846 [39]郭杏林,吴承伟.Influence of heat treatments on mechanical behavior of FV520B steel[J],Experimental Techniques,2013,10(1111):1201-1211 [40]樊俊铃,郭杏林,吴承伟.Fv520B不锈钢角焊缝结构的组织和断裂机理，材料工程[J],材料工程,2013,0(7):1-5