近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1] Junjie Zhan.A general assessment index for non-probabilistic reliability of structures with bounded field and pa[J],Computer Methods in Applied Mechanics and Engineering,2021
[2] Zhang, Hui-Kai.Topology optimization method for the design of bioinspired self-similar hierarchical microstructur[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2021,372
[3] Wang Xuan.Topology optimization for minimum stress design with embedded movable holes[J],Computers & Structures,2021
[4] Zhang, Hui-Kai.Topology optimization method for the design of bioinspired self-similar hierarchical microstructur[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2021,372
[5] 罗阳军.Topology optimization based on Kriging surrogate model and material-field series expansion: An effec[J],Computer Methods in Applied Mechanics and Engineering,2021,364:112966-
[6] 张晓鹏.Realization of full and directional band gap design by non-gradient topology optimization in acousti[J],Extreme Mechanics Letters,2021,42:101126-
[7] 林晔.压电智能结构拓扑优化研究进展[J],固体力学学报,2021
[8] 张晓鹏.Realization of full and directional band gap design by non-gradient topology optimization in acousti[J],Extreme Mechanics Letters,2021,42:101126-
[9] 林晔.压电智能结构拓扑优化研究进展[J],固体力学学报,2021
[10] Zhan, Junjie,Luo, Yangjun,Zhang, Xiaopeng,Kang, Zhan.A general assessment index for non -probabilistic reliability of structures with bounded field and[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2020,366
[11] Luo, Yangjun,Xing, Jian,Kang, Zhan.Topology optimization using material-field series expansion and Kriging-based algorithm: An effect[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2020,364
[12] Li, Ming,Li, Xiao,Che, LiXuan,Li, FengWei,Kang, Zhan.Non-uniform global-buckling and local-folding in thin film of stretchable electronics[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2020,175
[13] Liu, Pai,Shi, Litao,Kang, Zhan.Multi-material structural topology optimization considering material interfacial stress constraint[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2020,363
[14] Kang, Zhan,He, Jingjie,Shi, Lin,Miao, Zhaohui.A method using successive iteration of analysis and design for large-scale topology optimization c[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2020,362(,SI)
[15] Wang, Xuan,Hu, Ping,Kang, Zhan.Layout optimization of continuum structures embedded with movable components and holes simultaneou[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2020,61(2):555-573
[16] Wang, Wenpei,Chen, Guohai,Yang, Dixiong,Kang, Zhan.Stochastic isogeometric analysis method for plate structures with random uncertainty[J],COMPUTER AIDED GEOMETRIC DESIGN,2019,74
[17] Zhang, Huikai,Wang, Yaguang,Kang, Zhan.Topology optimization for concurrent design of layer-wise graded lattice materials and structures[J],INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE,2019,138:26-49
[18] Li, Ming,Li, Hao,Li, Fengwei,Kang, Zhan.Adhesion of Partially and Fully Collapsed Nanotubes[J],JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME,2019,86(1)
[19] Meng, Xianhong,Zhang, Bowen,Li, Hao,Li, Fengwei,Kang, Zhan,Li, Ming,Chen, Yuli.A theoretical analysis on self-collapsing of nanotubes[J],INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES,2019,160:51-58
[20] Li, Guili,Hou, Xuqin,Li, Haimei,Kang, Zhan,Shao, Chunguang,Liu, Chuntai.Interfacial cylindrite of poly(lactic acid) induced by pulling a single glass fiber[J],EUROPEAN POLYMER JOURNAL,2019,114:127-133
[21] Wang, Yaguang,Kang, Zhan.Concurrent two-scale topological design of multiple unit cells and structure using combined veloci[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2019,347:340-364
[22] Zhang, Xiaopeng,Takezawa, Akihiro,Kang, Zhan.A phase-field based robust topology optimization method for phononic crystals design considering u[J],COMPUTATIONAL MATERIALS SCIENCE,2019,160:159-172
[23] 亢战,钟万勰.斜拉桥参数共振问题的数值研究[J],土木工程学报,1998,31(4):14
[24] 关振群,顾元宪,李云鹏,亢战.AutoCAD 扩展实体数据接口方法及实现[J],大连理工大学学报,1998,02:21-25
[25] 亢战,白嵩.考虑不确定性与多场耦合的结构优化[J],科技创新导报,2016,13(19):177-178
[26] Kang, Z,Cheng, GD.epsilon-relaxation algorithm for truss topology optimization with local buckling constraints[A],1999,1-8
[27] Zhang, Xiaopeng,Takezawa, Akihiro,Kang, Zhan.Robust topology optimization of vibrating structures considering random diffuse regions via a phas[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2019,344:766-797
[28] Kang, Zhan,Wu, Chunlei,Luo, Yangjun,Li, Ming.Robust topology optimization of multi-material structures considering uncertain graded interface[J],COMPOSITE STRUCTURES,2019,208:395-406
[29] Shi N.,Gu Y.,Kang Z.,Hu J.,Fan F.,Han X.,Zhao M..Photonic assisted broadband instantaneous frequency measurement[A],2014
[30] Zhang, Xiaopeng,He, Jingjie,Takezawa, Akihiro,Kang, Zhan.Robust topology optimization of phononic crystals with random field uncertainty[J],INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING,2018,115(9):1154-1173
[31] Zhang H.-W.,Gu Y.-X.,Guan Z.-Q.,Kang Z.,Li Y.-P.,Zhao G.-Z..JIFEX software for finite element analysis and optimization design[J],Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS,2003,9(SUPPL.):160-166
[32] Li, Ming,Li, Hao,Li, Fengwei,Kang, Zhan,Meng, Xianhong.Mechanics of the folding of a nanotube[J],NANOTECHNOLOGY,2018,29(47):475602
[33] Li, Hai-Mei,Hou, Xu-Qin,Ma, Xin-Ping,Chen, Jin-Tao,Kang, Zhan,Li, Gui-Li.Core melt temperature effects on cylindritic structures of co-injection molded polypropylene parts[J],INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER,2018,97:56-63
[34] Liu, Pai,Kang, Zhan.Integrated topology optimization of multi-component structures considering connecting interface be[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2018,341:851-887
[35] Wang, Yaguang,Kang, Zhan.A velocity field level set method for shape and topology optimization[J],INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING,2018,115(11):1315-1336
[36] 王亚光,高进城,亢战.考虑增材制造中悬空角约束的水平集拓扑优化设计[A],2018,1
[37] 马晶,刘湃,亢战.考虑界面行为下对于可变动组件和基体结构的综合优化[A],2018,1
[38] 亢战,吴春雷.含多材料界面不确定性的鲁棒性拓扑优化[A],2018,1
[39] 罗阳军,邢健,亢战.柔性薄膜结构不确定性量化与无褶皱优化设计[A],2018,1
[40] 张会凯,罗阳军,亢战.基于拓扑优化方法的双材料手性拉涨超材料设计[A],2018,1
京公网安备 11010802027423号