近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Liu, Dachuan,Hao, Peng,Zhang, Kunpeng,Tian, Kuo,Wang, Bo,Li, Gang,Xu, Weixiu.On the integrated design of curvilinearly grid-stiffened panel with non-uniform distribution an...[J],MATERIALS & DESIGN,2020,190
[2]Meng, Zeng,Zhang, Zhuohui,Li, Gang,Zhang, Dequan.An active weight learning method for efficient reliability assessment with small failure probab...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2020,61(3):1157-1170
[3]贾振元,肖军,湛利华,陈磊,张宇民,李刚,王福吉,高航,林莉.大型航空复合材料承力构件制造关键技术[J],中国基础科学,2019,21(2):20-27
[4]Hao, Peng,Li, Gang,Wang, Bo,Liu, Dachuan,Wang, Yu,Liu, Xuanxiu.Collaborative design of fiber path and shape for complex composite shells based on isogeometric...[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2019,354:181-212
[5]Hao, Peng,Ma, Rui,Wang, Yutian,Feng, Shaowei,Wang, Bo,Li, Gang,Xing, Hanzheng,Yang, Fan.An augmented step size adjustment method for the performance measure approach: Toward general s...[J],STRUCTURAL SAFETY,2019,80:32-45
[6]李彬,李刚.基于Armijo准则的自适应稳定转换法[J],计算力学学报,2018,35(4):399-407
[7]郝鹏,王雨田,刘晨,王博,田阔,李刚,王群,蒋亮亮.Hierarchical nondeterministic optimization of curvilinearly stiffened aircraft panel with multicu...[J],AIAA Journal,2018,56:4180-4194
[8]赵刚,李刚.基于分位点的广义Pareto分布函数最小二乘拟合方法[J],应用数学和力学,2018,39(4):415-423
[9]李刚,李彬,胡浩.A novel first–order reliability method based on performance measure approach for highly nonlinea...[A],2018
[10]李刚,赵刚.Generalized Pareto Distribution for High Reliability Estimation Based on Radial Basis Function Ne...[A],2018
[11]王梦晨,李刚.Stochastic seismic analysis of structural damage–reduction system based on copula model[A],2018
[12]刘野,李刚.Reliability-based Robust Design Optimization in consideration of manufacturing tolerance by multi...[A],2018
[13]赫万鑫,李刚.An Improved Maximum Entropy Method via Fractional Moments with Univariate Dimension Reduction Met...[A],2018
[14]杨华,李刚.A new efficient RBDO decoupled method based on quantitle[A],2018
[15]吴新悦,李刚.A Reliability-Based Optimization Based on Bayesian Inference Under the Incomplete Information[A],2018
[16]蔡天舒,李刚.Bayesian Inference-Based Load Design Method of Underwater Vehicles[A],2018
[17]杨晨,李刚.hock Response Spectrum of Underwater Vehicle Load Based on Dynamic Design Analysis Method[A],2018
[18]Hao, Peng,Liu, Chen,Yuan, Xiaojie,Wang, Bo,Li, Gang,Zhu, Tianyu,Niu, Fei.Buckling optimization of variable-stiffness composite panels based on flow field function[J],COMPOSITE STRUCTURES,2017,181:240-255
[19]李彬,郝鹏,孟增,李刚.基于改进自适应混沌控制的逆可靠度分析方法[J],应用数学和力学,2017,38(9):979-987
[20]Hao, Peng,Wang, Yutian,Liu, Xuanxiu,Wang, Bo,Li, Gang,Wang, Lipeng.An efficient adaptive-loop method for non-probabilistic reliability-based design optimization[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2017,324:689-711
[21]唐霄汉,李彬,李刚,郝鹏,陈聪,任明法.基于动态本构模型的整流罩铰链系统自冲击分析[J],计算力学学报,2017,34(4):403-410
[22]姜运哲,曾岩,李刚,赵振军,周锦航.含滞迟缓冲器的螺栓法兰连接结构在泊松白噪声和有界噪声激励下的稳态响应分析[A],2017,11
[23]田中明,曾岩,武龙龙,李刚,王堃宇.泊松白噪声外激下含库伦摩擦项的van der Pol振子稳态响应分析[A],2017,9
[24]张晨光,曾岩,李刚,李明,马晶秋.泊松白噪声和高斯白噪声联合激励下赫兹阻尼碰撞双线性滞迟系统稳态响应分析[A],2017,8
[25]杨会叶,李刚.含分层损伤复合材料层板可靠度分析[A],2017,12
[26]姜运哲,曾岩,赵振军,李刚,关振群,周锦航,罗超.含滞迟缓冲器的螺栓法兰连接结构稳态随机响应[J],动力学与控制学报,2017,15(3):236-241
[27]Meng, Zeng,Zhou, Huanlin,Li, Gang,Hu, Hao.A hybrid sequential approximate programming method for second-order reliability-based design op...[J],ACTA MECHANICA,2017,228(5):1965-1978
[28]Hao, Peng,Wang, Bo,Tian, Kuo,Li, Gang,Sun, Yu,Zhou, Chunxiao.Fast procedure for Non-uniform optimum design of stiffened shells under buckling constraint[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2017,55(4):1503-1516
[29]Meng, Zeng,Li, Gang,Yang, Dixiong,Zhan, Lichao.A new directional stability transformation method of chaos control for first order reliability ...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2017,55(2):601-612
[30]曾岩,李刚.含滞迟缓冲器的螺栓法兰连接结构在泊松白噪声和有界噪声激励下的稳态响应分析[A],2017
[31]Li, Gang,Fang, Yaochu,Hao, Peng,Li, Zhaokai.Three-point bending deflection and failure mechanism map of sandwich beams with second-order hi...[J],JOURNAL OF SANDWICH STRUCTURES & MATERIALS,2017,19(1):83-107
[32]曾岩,李刚.泊松白噪声与高斯白噪声外激作用下非线性系统瞬态响应分析[A],2017
[33]李刚,郝鹏.Failure behavior of hierarchical corrugated sandwich structures with second-order core based on M...[J],Journal of Sandwich Structures and Materials,2017
[34]曾岩,李刚.泊松白噪声外激下含库仑摩擦项的van der Pol振子稳态响应分析[A],2017
[35]曾岩,李刚.泊松白噪声和高斯白噪声联合激励下赫兹阻尼碰撞双线性滞迟系统稳态响应分析[A],2017
[36]李兆凯,方耀楚,郝鹏,李刚.失效模式约束下层级褶皱结构的多目标优化[J],工程力学,2017,34(5):226-234
[37]Meng, Zeng,Li, Gang,Yang, Dixiong,Zhou, Huanlin.A decoupled approach for non-probabilistic reliability-based design optimization[J],COMPUTERS & STRUCTURES,2016,175:65-73
[38]Li, Gang,Zhan, Lichao,Li, Hao.An analytical solution to lateral buckling control of subsea pipelines by distributed buoyancy ...[J],THIN-WALLED STRUCTURES,2016,107:221-230
[39]李刚,战立超,孟增.基于分布浮力式的海底管道侧向屈曲控制优化[J],天津大学学报,2016,49(9):915-919
[40]王梦晨,李刚,曾岩,江义.基于能量平衡的偏心结构多模态Pushover近似方法[J],建筑结构学报,2016,37(9):43-52
京公网安备 11010802027423号