近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
张向奎.Initial solution estimation for one-step inverse isogeometric analysis in sheet metal stamping[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,330:629-645
Liu, Hongliang.Isogeometric analysis based topology optimization design with global stress constraint[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,342:625-652
祝雪峰.Intent Prediction of Pedestrians via Integration of Facial Expression and Human 2D Skeleton for A...[A],PROCEEDINGS OF THE 2021 IEEE 16TH CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA 2021),2022,1775-1780
祝雪峰.Isogeometric analysis for trimmed CAD surfaces using multi-sided toric surface patches[J],COMPUTER AIDED GEOMETRIC DESIGN,2022,79
Wang, Xuan.Isogeometric finite element method for buckling analysis of generally laminated composite beams...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2022,104:190-199
祝雪峰.Isogeometric Immersed Boundary Method using B++ Splines[A],Asia-Pacific Congress for Computational Mechanics,2022
Liu, Hongliang.Isogeometric method based in-plane and out-of-plane free vibration analysis for Timoshenko curv...[J],STRUCTURAL ENGINEERING AND MECHANICS,2022,59(3):503-526
Ji, Fenzhu.Investigation on performance and implementation of Tesla turbine in engine waste heat recovery[J],ENERGY CONVERSION AND MANAGEMENT,2022,179:326-338
祝雪峰.Temperature-constrained topology optimization of thermo-mechanical coupled problems[J],ENGINEERING OPTIMIZATION,2022,51(10):1687-1709
Kristan, Matej,程丽.The Eighth Visual Object Tracking VOT2020 Challenge Results[A],Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics),2022,12539 LNCS:547-601
祝雪峰.Theoretical prediction of mechanical properties of 3D printed Kagome honeycombs and its experim...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C JOURNAL OF ME,2022,233(18):6559-6576
Fan, Heng,程丽.VisDrone-SOT2020: The Vision Meets Drone Single Object Tracking Challenge Results[A],Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics),2022,12538 LNCS:728-749
祝雪峰.A new surface parameterization method based on one-step inverse forming for isogeometric analys...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,65(9-12):1215-1227
赵雅男.An optimized deep convolutional neural network for yield prediction of Buchwald-Hartwig amination[J],CHEMICAL PHYSICS,2022,550
祝雪峰.B++ splines and Isogeometric Analysis[A],11th World Conference of Computational Mechanics,2022
祝雪峰.B++ splines with applications to isogeometric analysis[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,311(1):503-536
祝雪峰.Bi-directional evolutionary method using NURBS interpolation for optimal design of 3D continuum ...[A],12th World Conference of Computational Mechanics,2022
祝雪峰.B plus plus splines with applications to isogeometric analysis[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,311:503-536
赵雅男.“C-H-π Interaction” Regulates the Stereoselectivity in Olefin Polymerization[J],CHEMICAL COMMUNICATIONS,2022,55:6689-6692
祝雪峰.Converting an unstructured mesh to a standard T-spline Surface with Feature Preservation using On...[A],12th World Conference of Computational Mechanics,2022
王选.考虑结构自重的基于NURBS插值的3D拓扑描述函数法[J],力学学报,2022,6:1437-1445
祝雪峰.Mesh parameterization based on inverse finite element method: theory and application[J],INVERSE PROBLEMS IN SCIENCE AND ENGINEERING,2022,21(7):1169-1182
祝雪峰.Nonconforming isogeometric analysis for trimmed CAD geometries using finite-element tearing and...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C JOURNAL OF ME,2022,231(8):1371-1389
张向奎.NURBS modeling and isogeometric shell analysis for complex tubular engineering structures[J],COMPUTATIONAL APPLIED MATHEMATICS,2022,36(4):1659-1679
王长生.Quasi-conforming analysis method for trimmed CAD surfaces[J],EUROPEAN JOURNAL OF MECHANICS A SOLIDS,2022,81
Sun, Yao.Reliability prediction model of further bus service based on random forest[J],Journal of algorithms computational technology,2022,11(4):327-335
胡平.Seamless integration of isogeometric analysis, topology optimization and manufacturing[A],12th world conference of Computational Mechanics,2022
姚宝珍.Simulation-based optimization for urban transportation demand management strategy[J],SIMULATION,2022,94(7,SI):637-647
Yang, Luolin.Single- and dual-phase capillary membranes prepared through plastic extrusion method for oxygen p...[J],CERAMICS INTERNATIONAL,2022,47(13):18510-18516
祝雪峰.基于FETI的非协调等几何分析[A],中国计算力学大会2012论文集中国力学学会,2022,1-11
杨琳.Design of Automatic Feeding System for White Body Welding Production Line[A],PROCEEDINGS OF CHINA SAE CONGRESS 2018: SELECTED PAPERS,2022,574:167-179
俞洲.Digital-twin-driven geometric optimization of centrifugal impeller with free-form blades for five...[J],JOURNAL OF MANUFACTURING SYSTEMS,2022,58:22-35
Gai, Yundong.Explicit isogeometric topology optimization based on moving morphable voids with closed B-splin...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2022,61(5):2217-2218
侯文彬.Explicit isogeometric topology optimization using moving morphable components[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,326:694-712
侯文彬.Extended isogeometric analysis using B plus plus splines for strong discontinuous problems[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,381
侯文彬.Extended Isogeometric Analysis with strong imposing essential boundary conditions for weak disc...[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,370
张维声.Explicit three dimensional topology optimization via Moving Morphable Void approach[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022
张维声.Explicit three dimensional topology optimization via Moving Morphable Void (MMV) approach[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,322:590-614
祝雪峰.Hierarchical B++ Splines with Applications to Isogeometric Analysis[A],12th World Conference of Computational Mechanics,2022
盖贇栋.Explicit isogeometric topology optimization based on moving morphable voids with closed B-spline ...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2019,61:963-982
祝雪峰.非协调样条几何的精确几何 Mortar 有限元[A],中国力学大会-2013,2013
祝雪峰.基于FETI的非协调等几何分析[J],应用数学和力学,2013,34(8):771-781
王选.基于NURBS插值的三维渐进结构优化方法[J],计算力学学报,2016,4:536-542
李宝军.基于弹塑性变形的快速展平算法与网格参数化[J],计算机辅助设计与图形学学报,2010,8:1266-1271
张向奎.基于深度学习的汽车冲压件缺陷预测[A],第十四届中国CAE技术年会,2022
刘宏亮.基于等几何分析的结构优化设计研究进展[J],固体力学学报,2022,03:248-267
祝雪峰.板面内自由振动的等几何分析[A],第十三届全国物理力学会议,2022
盖贇栋.检索矩形结构化网格中裁剪单元的数值算法[J],计算机辅助设计与图形学学报,2022,31(7):1203-1209
何宜谦.求解粘弹性问题的时域自适应等几何比例边界有限元法[J],工程力学,2022,37(2):23-33
Gai, Yundong.Explicit isogeometric topology optimization based on moving morphable voids with closed B-splin...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2020,61(3):963-982
祝雪峰.几何精确非协调等几何NURBS有限元[J],固体力学学报,2012,5:487-492
祝雪峰.B++样条和等几何分析[A],第九届全国几何设计与计算学术会议,2016
祝雪峰.等几何B++样条元法及其应用[A],中国力学大会-2017,2017
胡平.考虑结构自重的基于NURBS插值的3D拓扑描述函数法研究[J],力学学报,2016,1(1):1-5
Zhou Yu.Digital-twin-driven geometric optimization of centrifugal impeller with free-form blades for five...[J],JOURNAL OF MANUFACTURING SYSTEMS,2021,58:22-35
祝雪峰.Intent Prediction of Pedestrians via Integration of Facial Expression and Human 2D Skeleton for A...[A],2021,1775-1780
侯文彬.Extended isogeometric analysis using B plus plus splines for strong discontinuous problems[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2021,381:113779-
赵雅男.An optimized deep convolutional neural network for yield prediction of Buchwald-Hartwig amination[J],CHEMICAL PHYSICS,2021,550:111296-
王长生.Quasi-conforming analysis method for trimmed CAD surfaces[J],EUROPEAN JOURNAL OF MECHANICS A-SOLIDS,2021,81
祝雪峰.Isogeometric analysis for trimmed CAD surfaces using multi-sided toric surface patches[J],COMPUTER AIDED GEOMETRIC DESIGN,2021,79
Hou, Wenbin.Extended Isogeometric Analysis with strong imposing essential boundary conditions for weak disc...[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2021,370
Gai, Yundong,Zhu, Xuefeng,Zhang, Yongjie Jessica,Hou, Wenbin,Hu, Ping.Explicit isogeometric topology optimization based on moving morphable voids with closed B-splin...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2020,61(3):963-982
盖贇栋,侯文彬,祝雪峰,胡平.检索矩形结构化网格中裁剪单元的数值算法[J],计算机辅助设计与图形学学报,2019,31(7):1203-1209
Ji, Fenzhu,Bao, Yangping,Zhou, Yu,Du, Farong,Zhu, Hongji,Zhao, Shuai,Li, Guo,Zhu, Xuefeng,Ding, Shuiting.Investigation on performance and implementation of Tesla turbine in engine waste heat recovery[J],ENERGY CONVERSION AND MANAGEMENT,2019,179:326-338
Liu, Hongliang,Hao, Peng,Zhu, Xuefeng,Yang, Dixiong.Isogeometric analysis based topology optimization design with global stress constraint[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2018,342:625-652
Yao, Baozhen,Yan, Qianqian,Chen, Qian,Tian, Zhihui,Zhu, Xuefeng.Simulation-based optimization for urban transportation demand management strategy[J],SIMULATION-TRANSACTIONS OF THE SOCIETY FOR MODELING AND SIMULATION INTERNATIONAL,2018,94(7,SI):637-647
刘宏亮,祝雪峰,杨迪雄.基于等几何分析的结构优化设计研究进展[J],固体力学学报,2018,03:248-267
Zhang, Xiangkui,Hu, Ping,Ma, Zheng-Dong,Zhu, Xuefeng,Wang, Changsheng,Liu, Haibo,Zhou, Yu,Gai, Yundong,Zhao, Chao,Zheng, Guojun,Hang, Zhizhou.Initial solution estimation for one-step inverse isogeometric analysis in sheet metal stamping[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2018,330:629-645
张向奎,刘光彬,佟罡,胡平,申国哲,王长生,祝雪峰.基于深度学习的汽车冲压件缺陷预测[A],2018
Zhang, Xiangkui,Smith, Holly,Jin, Chunning,Hu, Ping,Zhu, Xuefeng,Hou, Wenbin,Xu, Jinting,Wang, Changsheng,Zhang, Yuewei,Ma, Zheng-Dong.NURBS modeling and isogeometric shell analysis for complex tubular engineering structures[J],COMPUTATIONAL & APPLIED MATHEMATICS,2017,36(4):1659-1679
Sun, Yao,Yan, Qianqian,Jiang, Yonglei,Zhu, X.F..Reliability prediction model of further bus service based on random forest[J],Journal of Algorithms and Computational Technology,2017,11(4):327-335
Hou, Wenbin,Gai, Yundong,Zhu, Xuefeng,Wang, Xuan,Zhao, Chao,Xu, Longkun,Jiang, Kai,Hu, Ping.Explicit isogeometric topology optimization using moving morphable components[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2017,326:694-712
Zhang, Weisheng,Chen, Jishun,Zhu, Xuefeng,Zhou, Jianhua,Xue, Dingchuan,Lei, Xin,Guo, Xu.Explicit three dimensional topology optimization via Moving Morphable Void (MMV) approach[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2017,322:590-614
Zhu, Xue-Feng,Ma, Zheng-Dong,Hu, Ping.Nonconforming isogeometric analysis for trimmed CAD geometries using finite-element tearing and...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2017,231(8):1371-1389
张维声,祝雪峰.Explicit three dimensional topology optimization via Moving Morphable Void approach[J],Computer Methods in Applied Mechanics and Engineering,2017
祝雪峰,胡平.等几何B++样条元法及其应用[A],2017
Zhu, Xuefeng,Hu, Ping,Ma, Zheng-Dong.B plus plus splines with applications to isogeometric analysis[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2016,311:503-536
王选,胡平,祝雪峰,盖赟栋.考虑结构自重的基于NURBS插值的3D拓扑描述函数法[J],力学学报,2016,48(6):1437-1445
王选,祝雪峰,胡平,盖赟东.基于NURBS插值的三维渐进结构优化方法[J],计算力学学报,2016,33(4):536-542
Liu, Hongliang,Zhu, Xuefeng,Yang, Dixiong.Isogeometric method based in-plane and out-of-plane free vibration analysis for Timoshenko curv...[J],STRUCTURAL ENGINEERING AND MECHANICS,2016,59(3):503-526
京公网安备 11010802027423号