近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
盈亮.Ductile failure analysis of high strength steel in hot forming based on micromechanical damage ...[A],12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,80
胡平.Effect of oxide scale on temperature-dependent interfacial heat transfer in hot stamping proces...[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2022,213(9):1475-1483
Liu, W. Q..Effect of Material Damage on Thermal Forming Limit Prediction for Hot Stamping[A],3rd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU),2022,225-229
Yu, Ye.Elastic constants for adhesively bonded corrugated core sandwich panels[J],COMPOSITE STRUCTURES,2022,176:449-459
Liu, Yang.Experimental and computational study of microstructural effect on ductile fracture of hot-formi...[J],MATERIALS SCIENCE AND ENGINEERING A STRUCTURAL MATERIALS PROPERTIES MICROST,2022,724:298-323
Shi, D. Y..Experimental and Numerical Determination of Thermal Forming Limit Diagrams (TFLD) of High Stren...[A],11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,1532:406-413
盈亮.Experimental investigation of temperature-dependent interfacial heat transfer mechanism with sp...[J],APPLIED THERMAL ENGINEERING,2022,121:48-66
盈亮.Experimental and numerical investigation on temperature field and tailored mechanical propertie...[J],Journal of Manufacturing Processes,2022,57:930-956
Guo, R.Q..Experimental study on hot bending of 22MnB5 steel[J],Advanced materials research,2022,314-316:66-69
常颖.Influence of Hot Press Forming Techniques on Properties of Vehicle High Strength Steels[J],Journal of Iron and Steel Research,2022,18(5):59-63
盈亮.Influence of Low Tempering Temperature on Fracture Toughness of Ultra High Strength Boron Steel...[A],International Conference on Advances in Materials and Manufacturing Processes,2022,146-147:160-165
Deng, Siying.Investigations on Numerical Simulation of Tailored Tempering Process Based on Related Experimen...[A],11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,1532:924-930
胡平.Investigation on Crush Performance of HAT Samples Based on 7075 Alloy HFQ Process[A],3rd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU),2022,380-384
盈亮.Investigation of convection heat transfer coefficient of circular cross-section short pipes in ...[J],APPLIED THERMAL ENGINEERING,2022,138:133-153
盈亮.Investigation on Formability of High Strength Aluminum Sheet AA7075 with HFQ Process[A],International Conference on Hot Stamping of UHSS 2015,2022,94-98
Gao, Tianhan.Investigation on mechanical behavior and plastic damage of AA7075 aluminum alloy by thermal sma...[J],Journal of Manufacturing Processes,2022,50:1-16
盈亮.Investigation of interfacial heat transfer mechanism for 7075-T6 aluminum alloy in HFQ hot form...[J],APPLIED THERMAL ENGINEERING,2022,118:266-282
盈亮.Investigation of Mechanical Property and Springback Behavior with Hot Stamping RCP Process[A],ICHSU2014,2022,1063:186-189
盈亮.Investigation of Mechanical Property and Springback Behavior with Hot Stamping RCP Process[J],Advanced materials research,2022,1(1063):186-189
盈亮.Temperature-dependent IHTC Property for Oxidation Micro-layer of 22MnB5 in Hot Stamping Process[A],2nd International Conference on Energy and the Future of Treatment and Surface Engineering,2022,94-100
胡平.The finite element analysis of ductile damage during hot stamping of 22MnB5 steel[J],MATERIALS DESIGN,2022,69:141-152
胡平.The Investigation of 3D Temperature Field Numerical Simulation in Hot Forming of High Strength ...[A],11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,1532:104-113
胡平.Thermoplastic behavior and application in the auto body light-weight manufacture of high strength...[J],北京理工大学学报,2022,34:159-163
胡平.Thermoplastic forming limit of high strength steel[J],北京理工大学学报,2022,34:128-132
盈亮.Towards joinability of thermal self-piercing riveting for AA7075-T6 aluminum alloy sheets under q...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2022,189
盈亮.Wastewater minimization through the combination of process integration techniques and multi-objec...[J],Computer Aided Chemical Engineering,2022,15(C):928-933
Gao, Tianhan.A comparative study of temperature-dependent interfacial heat transfer coefficient prediction m...[J],INTERNATIONAL JOURNAL OF THERMAL SCIENCES,2022,139:36-60
Rong, Hai.A Novel Continuum Damage Constitutive Model for Predicting the Formability of AA7075 Alloy at Ele...[A],Minerals, Metals and Materials Series,2022,1617-1622
胡平.A thermal forming limit prediction method considering material damage for 22MnB5 sheet[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,92(1-4):627-638
Rong, Hai.Characterization on the thermal anisotropic behaviors of high strength AA7075 alloy with the Yld2...[J],JOURNAL OF ALLOYS AND COMPOUNDS,2022,877
Shi, Dongyong.Comparative study of ductile fracture prediction of 22MnB5 steel in hot stamping process[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,84(5-8):895-906
戴明华.Comparative study on thin-walled structures with function graded strength and tapered angle[J],INTERNATIONAL JOURNAL OF CRASHWORTHINESS,2022,24(3):257-271
盈亮.Crashworthiness design of quenched boron steel thin-walled structures with functionally graded ...[J],INTERNATIONAL JOURNAL OF IMPACT ENGINEERING,2022,95:72-88
胡平.Crystal plasticity extended models based on thermal mechanism and damage functions: Application...[J],INTERNATIONAL JOURNAL OF PLASTICITY,2022,86:1-25
Liu, Yang.Crystal plasticity extend FEM implementation of thermal-tensile aluminum alloy[A],12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,80
刘燕.Crystal Plasticity Finite Element Model Based on Dislocation Density Evolution Coupling with Th...[A],3rd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU),2022,219-224
Ma, Ning.Coupled Models of Hot Forming of Ultra Strength Steel Sheets[J],STEEL RESEARCH INTERNATIONAL,2022,81(9,SI):900-903
Li, Ye.Coupled Numerical Simulation of Hot Stamping Process and Experimental Verification[A],11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,1532:471-477
胡平.Coupled of Thermal-Mechanical-Transformation Numerical Simulation on Hot Stamping with Static E...[A],11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,1532:394-405
朱祎国.Modeling and experimental verification ofthermo-mechanical coupled behavior of face-centered-cubi...[J],MATERIALS DESIGN,2022,52(12):289-294
盈亮.Multiobjective crashworthiness optimization of thin-walled structures with functionally graded ...[J],THIN WALLED STRUCTURES,2022,117:165-177
胡平.Numerical investigation on cooling performance of hot stamping tool with various channel design...[J],APPLIED THERMAL ENGINEERING,2022,96:338-351
胡平.Numerical Investigation for Formability of Aluminum 6016 Alloy under Non-isothermal Warm Formin...[A],11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,1532:464-470
黄一.Novel electrical resistance method to measure underdeposit corrosion and its inhibition in pipe...[J],CORROSION ENGINEERING SCIENCE AND TECHNOLOGY,2022,51(3):211-222
Kan, Dongbin.Numerical Prediction of Microstructure and Mechanical Properties During the Hot Stamping Proces...[A],8th International Conference and Workshop on Numberical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011),2022,1383:602-609
Shi, Dongyong.Numerical Simulation of Temperature Field, Microstructure Evolution and Mechanical Properties o...[A],9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET),2022,1567:962-965
盈亮.Numerical Simulation of Temperature Field, Microstructure Evolution and Mechanical Properties of ...[A],NUMISHEET2014,2022,962(2013):962-965
zhaodan.NUMERICAL SIMULATION OF DEFORMATION BEHAVIOR OF 22MnB5 BORON STEEL AT ELEVATED TEMPERATURES AND...[J],Acta Mechanica Solida Sinica,2022,27(6):579-587
韩啸.On the fracture behaviour of adhesively bonded CFRP hat-shaped thin-walled beam under axial cru...[J],COMPOSITE STRUCTURES,2022,215:258-265
盈亮.On crashing behaviors of bio-inspired hybrid multi-cell Al/CFRP hierarchical tube under quasi-sta...[J],COMPOSITE STRUCTURES,2022,257
侯文彬.On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimen...[J],JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY,2022
盈亮.On the numerical implementation of a shear modified GTN damage model and its application to small...[J],International Journal of Material Forming,2022,2017:1-13
盈亮.On the numerical implementation of a shear modified GTN damage model and its application to sma...[J],International Journal of Material Forming,2022,11(4):527-539
盈亮.On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminu...[J],JOURNAL OF ALLOYS AND COMPOUNDS,2022,802:675-693
hebin.Optimal design of longitudinal conformal cooling channels in hot stamping tools[J],APPLIED THERMAL ENGINEERING,2022,106:1176-1189
Liu, W. Q..Parameter calibration for a shear modified GTN model and its application to forming limit predi...[A],NUMISHEET 2018: 11TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES,2022,1063(1)
刘文权.Parameter calibration for a shear modified GTN model and its application to forming limit predict...[J],Journal of physics Conference series,2022,1063:12110-12116
盈亮.Parameter Calibration of GTN Damage Model and Formability Analysis of 22MnB5 in Hot Forming Pro...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022,26(11):5155-5165
盈亮.Optimization Design Method of School Bus Structure Lightweight on the Rollover Safety[A],Proceedings of SAE-China Congress/Society of Automotive Engineers of China (SAE-China),2022,28:261-268
Yu Y..Optimization design method of school bus structure lightweight on the rollover safety[A],SAE-China Congress, 2014,2022,328:261-268
盈亮.Optimization Evaluation Test of Strength and Toughness Parameters for Hot-Stamped High Strength...[J],Journal of Iron and Steel Research,2022,20(11):51-56
盈亮.Research on Rapid-Cooling Press Hardening Process and Its Effect for Formability of Ultra High ...[A],11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,1532:414-420
hebin.Research on optimization design of conformal cooling channels in hot stamping tool based on res...[A],12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),2022,80
盈亮,高天涵,荣海,韩啸,胡平,侯文彬,Tianhan Gao,Hai Rong,Ping Hu.On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminum ...[J],Journal of Alloys and Compounds,2019,802:675-693
盈亮,戴明华,张思注,马浩林,胡平.Multiobjective crashworthiness optimization of thin-walled structures with functionally graded ...[J],THIN-WALLED STRUCTURES,2017,117:165-177
Gao, Tianhan,Ying, Liang,Hu, Ping,Han, Xiao,Rong, Hai,Wu, Yi,Sun, Jingshuai.Investigation on mechanical behavior and plastic damage of AA7075 aluminum alloy by thermal sma...[J],JOURNAL OF MANUFACTURING PROCESSES,2020,50:1-16
Ying, Liang,Gao, Tianhan,Hou, Wenbin,Rong, Hai,Han, Xiao,Hu, Ping.On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminu...[J],JOURNAL OF ALLOYS AND COMPOUNDS,2019,802:675-693