当前位置: X-MOL首页全球导师 国内导师 › 胡平

个人简介

教育经历 1982.2 1984.12 吉林工业大学 计算力学 硕士 1978.2 1981.12 吉林工业大学 数学力学 学士 1992.3 1993.11 吉林工业大学 固体力学 博士 工作经历 2006.12 至今 大连理工大学汽车工程学院 院长 2005.5 2005.6 美国UGS公司技术中心 访问教授 2004.11 2004.11 美国UGS公司技术中心 访问教授 2004.7 2004.8 韩国科学与技术研究院(Kaist) 访问教授 2003.11 2003.12 香港中文大学 访问教授 2003.8 至今 吉林大学车身工程专业 博士导师 2003.8 至今 吉林大学汽车动态模拟国家重点实验室 教授 2003.6 至今 吉林大学车身与模具工程研究所 所长 2001.9 2001.12 美国Michigan大学先进制造中心 访问教授 2000.6 2002.3 吉林大学研究生院 副院长 1995.7 1999.11 汽车覆盖件成形技术研究所 所长 1995.7 1999.5 吉林大学 博士导师 1995.12 2000.6 吉林工业大学计算中心 主任 1993.12 1994.4 吉林工业大学理学院 教授 1988.1 1991.8 吉林工业大学应用理科部 讲师 工业装备结构分析国家重点实验室 教授 大连理工大学运载工程与力学学部 常务副部长 1991.9 1992.2 吉林工业大学理学院 副教授 1994.5 1996.5 日本神户大学 博士后

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Gai, Yundong,Zhu, Xuefeng,Zhang, Yongjie Jessica,Hou, Wenbin,Hu, Ping.Explicit isogeometric topology optimization based on moving morphable voids with closed B-splin...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2020,61(3):963-982 Wang, Xuan,Hu, Ping,Kang, Zhan.Layout optimization of continuum structures embedded with movable components and holes simultan...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2020,61(2):555-573 Akhmet, Ganiy,Yu, Ye,Hu, Ping,Hou, Wen-bin,Han, Xiao.Analysis of the performance of adhesively bonded corrugated core sandwich structures using cohe...[J],JOURNAL OF SANDWICH STRUCTURES & MATERIALS,2020,22(1):104-124 Liu, W. Q.,Ying, L.,Dai, M. H.,Hu, P.,Wang, D. T..Parameter calibration for a shear modified GTN model and its application to forming limit predi...[A],2018,1063(1) 盖贇栋,侯文彬,祝雪峰,胡平.检索矩形结构化网格中裁剪单元的数值算法[J],计算机辅助设计与图形学学报,2019,31(7):1203-1209 刘洋,朱祎国,胡平.基于多尺度特征应变均匀化计算HCP多晶体塑性[J],计算力学学报,2019,36(4):536-541 Hu, P.,Akhmet, G.,Wu, C. W.,Han, X.,Chao, Y. X.,Yu, Y.,Orazbayeva, A..Characterisation on the influence of curing history on the mechanical performance of adhesively...[J],THIN-WALLED STRUCTURES,2019,142(,SI):37-51 夏阳,徐可,郑国君,邹睿,李宝军,胡平.Investigation on the elasto-plastic constitutive equation of parts fabricated by fused deposition...[J],Rapid Prototyping Journal,2019 Hu, Ping,Yang, Lei,Li, Baojun.Skeleton-Section Template Parameterization for Shape Optimization[J],JOURNAL OF MECHANICAL DESIGN,2018,140(12) Hu, Qingyuan,Chouly, Franz,Hu, Ping,Cheng, Gengdong,Bordas, Stephane P. A..Skew-symmetric Nitsche's formulation in isogeometric analysis: Dirichlet and symmetry condition...[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2018,341:188-220 刘伟杰,胡平,Khemais Saanouni,张向奎.基于微态方法的耦合韧性损伤的弹塑性本构模型[J],计算力学学报,2018,35(4):444-450 Wang, Changsheng,Lu, Xingtong,Zhang, Xiangkui,Hu, Ping.8-node quasi-conforming plane element by using Bernstein basis functions[J],EUROPEAN JOURNAL OF MECHANICS A-SOLIDS,2018,70:127-140 Ying, Liang,Wang, Dan-tong,Liu, Wen-quan,Wu, Yi,Hu, Ping.On the numerical implementation of a shear modified GTN damage model and its application to sma...[J],INTERNATIONAL JOURNAL OF MATERIAL FORMING,2018,11(4):527-539 Ying, Liang,Gao, Tianhan,Dai, Minghua,Hu, Ping,Shen, Luming.Investigation of convection heat transfer coefficient of circular cross-section short pipes in ...[J],APPLIED THERMAL ENGINEERING,2018,138:133-153 Guo, Jinghua,Wang, Jin,Hu, Ping,Li, Linhui.Robust guaranteed-cost path-following control for autonomous vehicles on unstructured roads[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING,2018,232(7):896-908 Hou, Wenbin,Shan, Chunlai,Yu, Ye,Hu, Ping,Zhang, Hongzhe.Product-family shared-component selection based on the consistency constraint function[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING,2018,232(6):838-849 盈亮,高天涵,蒋迪,侯文彬,胡平.7XXX系铝合金HFQ温成形界面换热系数实验研究[J],中国有色金属学报,2018,28(4):662-669 刘文权,盈亮,荣海,胡平.高强度钢板热成形性预测研究进展[J],河北科技大学学报,2018,39(2):91-98 杨磊,李宝军,胡平.面向薄壁结构件的线-面简化模型自动提取[J],汽车工程学报,2018,8(2):88-96 Zhang, Xiangkui,Hu, Ping,Ma, Zheng-Dong,Zhu, Xuefeng,Wang, Changsheng,Liu, Haibo,Zhou, Yu,Gai, Yundong,Zhao, Chao,Zheng, Guojun,Hang, Zhizhou.Initial solution estimation for one-step inverse isogeometric analysis in sheet metal stamping[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2018,330:629-645 张向奎,刘伟杰,胡平.基于流动理论的板材多步成形模拟方法[J],大连理工大学学报,2018,58(1):25-31 Yu, Ye,Ying, Liang,Hou, Wen-bin,Jia, Xiu-xian,Hu, Ping,Akhmet, Ganiy.Failure analysis of adhesively bonded steel corrugated sandwich structures under three-point be...[J],COMPOSITE STRUCTURES,2018,184:256-268 夏阳,胡平.Exact Geometry Based Quasi-Conforming Analysis: Isogeometric Analysis Method with[A],2018 夏阳,胡平.Exact geometry based quasi-conforming formulation for analysis and design of complex spatial beam...[A],2018 夏阳,胡平.Exact Geometry Based Quasi-Conforming Analysis: Isogeometric Analysis Method with Quasi-Conformin...[A],2018 刘文权,盈亮,戴明华,胡平,王丹彤.Parameter calibration for a shear modified GTN model and its application to forming limit predict...[J],Journal of Physics: Conference Series,2018,1063:12110-12116 Bo Wang,李宝军,Franca Giannini,Marina Monti,胡平,梁继才.Curve-based image editing for Product Styling[J],Computer-Aided Design and Applications,2018 李宝军,杨磊,王胜法,胡平.面向薄壁结构设计的CAE分析模型重用及软件研发[A],2018 Liu, Mingzeng,Li, Baojun,Guo, Qingjie,Zhu, Chungang,Hu, Ping,Shao, Yuanhai.Progressive iterative approximation for regularized least square bivariate B-spline surface fit...[J],JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS,2018,327:175-187 孙宏图,王健,申国哲,胡平.铝合金薄壁多角管轴向冲击吸能特性研究[J],机械强度,2018,40(1):124-129 张向奎,佟罡,胡平,王长生.CAE数据驱动下基于机器学习的协同设计冲突消解[A],2018 张向奎,刘光彬,佟罡,胡平,申国哲,王长生,祝雪峰.基于深度学习的汽车冲压件缺陷预测[A],2018 Zhang, Xiangkui,Smith, Holly,Jin, Chunning,Hu, Ping,Zhu, Xuefeng,Hou, Wenbin,Xu, Jinting,Wang, Changsheng,Zhang, Yuewei,Ma, Zheng-Dong.NURBS modeling and isogeometric shell analysis for complex tubular engineering structures[J],COMPUTATIONAL & APPLIED MATHEMATICS,2017,36(4):1659-1679 Ying, Liang,Liu, Wenquan,Wang, Dantong,Hu, Ping.Parameter Calibration of GTN Damage Model and Formability Analysis of 22MnB5 in Hot Forming Pro...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2017,26(11):5155-5165 Hou, Wenbin,Gai, Yundong,Zhu, Xuefeng,Wang, Xuan,Zhao, Chao,Xu, Longkun,Jiang, Kai,Hu, Ping.Explicit isogeometric topology optimization using moving morphable components[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2017,326:694-712 Zhang, Xiangkui,Xia, Yang,Hu, Qingyuan,Hu, Ping.Efficient isogeometric formulation for vibration analysis of complex spatial beam structures[J],EUROPEAN JOURNAL OF MECHANICS A-SOLIDS,2017,66:212-231 Wang, Changsheng,Wang, Xuan,Zhang, Xiangkui,Hu, Ping.Assumed stress quasi-conforming technique for static and free vibration analysis of Reissner-Mi...[J],INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING,2017,112(4):303-337 Liu, Weijie,Saanouni, Khemais,Forest, Samuel,Hu, Ping.The Micromorphic Approach to Generalized Heat Equations[J],JOURNAL OF NON-EQUILIBRIUM THERMODYNAMICS,2017,42(4):327-357 Liu, Weijie,Zhang, Xiangkui,Hu, Ping.Developments of multi-step simulations in sheet metal forming processes[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,93(1-4):1379-1397 金勇,韩啸,胡平.环氧树脂胶粘剂水浸环境扩散特性建模和试验研究[A],2017,8 王博,李宝军,胡平,梁继才.一种自动提取车身前视图参数化模型的方法[J],汽车工程学报,2017,7(5):327-333 Yu, Ye,Hou, Wen-bin,Hu, Ping,Ying, Liang,Akhmet, Ganiy.Elastic constants for adhesively bonded corrugated core sandwich panels[J],COMPOSITE STRUCTURES,2017,176:449-459 李晓达,张向奎,胡平,刘伟杰.高强钢板22MnB5热成形的一步逆成形有限元方法[J],机械设计与制造,2017,9:13-15 Hu, Ping,Liu, Wenquan,Ying, Liang,Zhang, Jinghuang,Wang, Dantong.A thermal forming limit prediction method considering material damage for 22MnB5 sheet[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,92(1-4):627-638 Wang, Changsheng,Zhang, Xiangkui,Hu, Ping.Assumed stress quasi-conforming triangular element for couple stress theory[J],ACTA MECHANICA SOLIDA SINICA,2017,30(4):335-344 Ying, Liang,Gao, Tianhan,Dai, Minghua,Yang, Yunhe,Hu, Ping.Experimental investigation of temperature-dependent interfacial heat transfer mechanism with sp...[J],APPLIED THERMAL ENGINEERING,2017,121:48-66 Xia, Yang,Zheng, Guojun,Hu, Ping.Incompatible modes with Cartesian coordinates and application in quadrilateral finite element f...[J],COMPUTATIONAL & APPLIED MATHEMATICS,2017,36(2):859-875 Ying, Liang,Gao, Tianhan,Dai, Minghua,Hu, Ping.Investigation of interfacial heat transfer mechanism for 7075-T6 aluminum alloy in HFQ hot form...[J],APPLIED THERMAL ENGINEERING,2017,118:266-282 Li, Baojun,Yang, Lei,Jiang, Hui,Sun, Weixue,Hu, Ping.Concurrent editing of automotive styling and structure with wireframe-pair[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING,2017,231(6):828-841 Zhu, Xue-Feng,Ma, Zheng-Dong,Hu, Ping.Nonconforming isogeometric analysis for trimmed CAD geometries using finite-element tearing and...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2017,231(8):1371-1389 Diamantopoulou, Evangelia,Liu, Weijie,Labergere, Carl,Badreddine, Houssem,Saanouni, Khemais,Hu, Ping.Micromorphic constitutive equations with damage applied to metal forming[J],2nd International Conference on Damage Mechanics (ICDM),2017,26(2):314-339 Li, Xiaodong,Han, Shuo,Wang, Cunyu,Chang, Ying,Hu, Ping,Dong, Han.第三代汽车钢温热成形工艺研究及性能评价[J],机械工程学报,2017,53(8):35-42 盈亮,张富博,戴明华,胡平.基于侧碰的梯度性能热成形B柱抗撞性能优化[J],机械工程学报,2017,53(12):102-109 宋明亮,刘建军,靳春宁,胡平.浅析房车内部空间设计[J],设计,2017,1:12-13 Li, Xiaodong,Chang, Ying,Wang, Cunyu,Dong, Han,Hu, Ping.Comparison of the hot-stamped boron-alloyed steel and the warm-stamped medium-Mn steel on micro...[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2017,679:240-248 盈亮,胡平.On the numerical implementation of a shear modified GTN damage model and its application to small...[J],International Journal of Material Forming,2017,2017:1-13 侯文彬,胡平,张红哲.Multilevel optimization method for vehicle body in conceptual deisign[J],International Journal of Vehicle Design,2017,73:157-178 韩啸,胡平.环氧树脂胶粘剂水浸环境扩散特性建模和试验研究[A],2017 Wang, Changsheng,Wang, Yang,Yang, Caixia,Hu, Ping,Zhang, Xiangkui.8-node and 12-node plane elements based on assumed stress quasi-conforming method immune to dis...[J],ENGINEERING COMPUTATIONS,2017,34(8):2731-2751 Hou, Wenbin,Zhang, Hongzhe,Hu, Ping,Shan, Chunlai.Multilevel optimisation method for vehicle body in conceptual design[J],INTERNATIONAL JOURNAL OF VEHICLE DESIGN,2017,73(1-3,SI):157-178

推荐链接
down
wechat
bug