近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
侯文彬.Design of energy-dissipating structure with functionally graded auxetic cellular material[J],INTERNATIONAL JOURNAL OF CRASHWORTHINESS,2017
桑琳.Development of short basalt fiber reinforced polylactide composites and their feasible evaluation [J],COMPOSITES PART B ENGINEERING,2019,164:629-639
侯文彬.Extended isogeometric analysis using B plus plus splines for strong discontinuous problems[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2021,381:113779-
赵永宏.Conceptual modular design of auto body frame based on hybrid optimization method[J],Computer Modeling in Engineering & Sciences,2021,122(1):351-376
袁焕泉.基于可制造性约束的车身变截面梁关联优化设计[J],机械设计,2021,37:112-116
Yu Jiang.Crashworthiness design of thin-walled tubes reinforced by TPMS[J],3D Printing and Additive Manufacturing,2021
徐金亭.PLSP based layered contour generation from point cloud for additive manufacturing[J],ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING,2021,49:1-12
侯文彬.一种汽车LED前照灯散热器的性能分析及优化[J],计算机集成制造系统,2014,11:2728-2733
耿富荣,朱晋甫,赵永宏,李健华,侯文彬.基于塑性铰理论的车身概念设计正碰分析与优化方法[J],计算力学学报,2020,37(2):171-177
赵永宏,李永成,陈东,侯文彬.基于改进图分解法的多材料车身结构优化设计方法[J],汽车工程,2020,42(4):560-566
陈东,赵永宏,侯文彬,汪芳胜,李晓龙.基于多模型拓扑优化方法的车身结构概念设计[J],计算机辅助工程,2020,29(1):66-70
胡平,侯文彬,韩啸.Analysis of the performance of adhesively bonded corrugated core sandwich structures using cohesive [J],Journal of Sandwich Structures and Materials,2017
盖贇栋,祝雪峰,Jessica Yongjie Zhang,侯文彬,胡平.Explicit isogeometric topology optimization based on moving morphable voids with closed B-spline bou[J],Structural and Multidisciplinary Optimization,2019,61:963-982
许现哲,刘通,王文丽,侯文彬.碳纤维增强聚合物复合材料车身T型接头静态性能与失效机制[J],复合材料学报,2019,36(10):2227-2234
Ying, Liang,Tianhan Gao,Hai Rong,Xiao Han,Ping Hu,Wenbin Hou.On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminum[J],Journal of Alloys and Compounds,2019,822:675-693
盖贇栋,胡平,侯文彬,祝雪峰.检索矩形结构化网格中裁剪单元的数值算法[J],计算机辅助设计与图形学学报,2019,31(7):1203-1209
李宝军,夏阳,靳春宁,侯文彬,郑国君,高仁璟.基于虚拟仿真的汽车车身设计课程群建设探索[J],实验室科学,2019,22(2):124-127
许现哲,刘通,王文丽,侯文彬.碳纤维车身T型接头静态失效机理的研究[A],2018,1
盈亮,高天涵,蒋迪,侯文彬,胡平.7XXX系铝合金HFQ温成形界面换热系数实验研究[J],中国有色金属学报,2018,28(4):662-669
王海丰,于野,许现哲,侯文彬.车身碳纤维接头结构横向弯曲性能研究[J],汽车工程,2019,41(1):86-90,111
Hou, Wenbin,Gai, Yundong,Zhu, Xuefeng,Wang, Xuan,Zhao, Chao,Xu, Longkun,Jiang, Kai,Hu, Ping.Explicit isogeometric topology optimization using moving morphable components[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2017,326:694-712
Hou, Wenbin,Xu, Xianzhe,Wang, Haifeng,Tong, Liyong.Bending behavior of single hat-shaped composite T-joints under out-of-plane loading for lightweigh[J],JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2018,37(12):808-823
Yu, Ye,Ying, Liang,Hou, Wen-bin,Hu, Ping,Jia, Xiu-xian,Akhmet, Ganiy.Failure analysis of adhesively bonded steel corrugated sandwich structures under three-point bendi[J],COMPOSITE STRUCTURES,2018,184:256-268
Hou, Wenbin,Shan, Chunlai,Yu, Ye,Hu, Ping,Zhang, Hongzhe.Product-family shared-component selection based on the consistency constraint function[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING,2018,232(6):838-849
王耿杰,徐金亭,侯文彬,孙玉文.Analysis of mechanical properties of fused deposition modelling parts of HIPS material based on tagu[A],2018,494-501
韩啸,金勇,杨鹏,李小阳,侯文彬.胶层厚度对胶粘剂Ⅰ型断裂韧性影响试验和仿真研究[J],机械工程学报,2018,54(10):43-52
赵曦,陈帅,盈亮,侯文彬,胡平.梯度强度汽车薄壁结构抗撞性优化[J],汽车工程,2018,40(5):508-514
单春来,李永成,侯文彬.基于模块化设计的车身装配结构优化[J],汽车工程,2018,40(5):617-624
顾丰,侯文彬,崔晓敏,姚宝珍,高俊杰.一种汽车快修连锁店双层规划选址模型[J],大连理工大学学报,2018,58(2):202-208
靳春宁,郑国君,侯文彬,李宝军.跨平台轻量化模型在汽车设计教学中的应用[J],实验室科学,2018,21(1):73-76
李宝军,郑国君,侯文彬,靳春宁.基于OBE的车身CAD/CAM实验教学探索[J],实验室科学,2018,21(1):146-149
Tian, Zhihui,Hou, Wenbin,Gu, Xiaoning,Gu, Feng,Yao, Baozhen.The location optimization of electric vehicle charging stations considering charging behavior[J],SIMULATION-TRANSACTIONS OF THE SOCIETY FOR MODELING AND SIMULATION INTERNATIONAL,2018,94(7,SI):625-636
李琳辉,郑伟娜,孔令超,Umit Ozguner,侯文彬,连静.Real-time Traffic Scene Segmentation Based on Multi-Feature Map and Deep Learning[A],2018,7-12
宁一高,岳明,许媛,侯文彬.rajectory tracking control of a wheeled inverted pendulum vehicle: from theory to experiment[A],2018,83-88
侯文彬,单春来,于野,张红哲.模块化平台的模块划分及共享模块筛选方法[J],机械工程学报,2018,54(1):188-196
Han, Xiao,Jin, Yong,Zhang, Wei,Hou, Wenbin,Yu, Ye.Characterisation of moisture diffusion and strength degradation in an epoxy-based structural adhes[J],JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY,2018,32(15):1643-1657
Zhang, Xiangkui,Smith, Holly,Jin, Chunning,Hu, Ping,Zhu, Xuefeng,Hou, Wenbin,Xu, Jinting,Wang, Changsheng,Zhang, Yuewei,Ma, Zheng-Dong.NURBS modeling and isogeometric shell analysis for complex tubular engineering structures[J],COMPUTATIONAL & APPLIED MATHEMATICS,2017,36(4):1659-1679
Yue, Ming,Hou, Xiaoqiang,Hou, Wenbin.Composite Path Tracking Control for Tractor-Trailer Vehicles Via Constrained Model Predictive Cont[J],JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME,2017,139(11)
侯文彬,侯少强,韩啸.基于多层次优化的碳纤维复合材料电池箱设计[A],2017,5
Gu, Feng,Zhang, Mengjie,Hou, Wenbin,Gao, Junjie.Distribution optimization of the specialized car repair store based on the maximization of market [J],ADVANCES IN MECHANICAL ENGINEERING,2017,9(9)
Yu, Ye,Hou, Wen-bin,Hu, Ping,Ying, Liang,Akhmet, Ganiy.Elastic constants for adhesively bonded corrugated core sandwich panels[J],COMPOSITE STRUCTURES,2017,176:449-459
侯文彬,夏明栋,徐金亭.增材制造中复杂区域的分割填充扫描算法[J],计算机集成制造系统,2017,23(9):1853-1859
杨星,于野,张伟,侯文彬.基于三维多胞结构的汽车吸能盒优化设计[J],大连理工大学学报,2017,57(4):331-336
Hou, Wenbin,Shan, Chunlai,Yu, Ye,Hu, Ping,Zhang, Hongzhe.Modular platform optimization in conceptual vehicle body design via modified graph-based decomposi[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2017,55(6):2087-2097
侯文彬,单春来,于野,张红哲.模块化产品族的共享模块筛选方法[J],湖南大学学报（自然科学版）,2017,44(2):66-74
徐金亭,侯文彬,张红哲.An improved virtual edge approach to slicing of point cloud for additive manufacturing[J],The CAD conference,2017,1(1):1-9
侯文彬,胡平,张红哲.Multilevel optimization method for vehicle body in conceptual deisign[J],International Journal of Vehicle Design,2017,73:157-178
侯文彬,张伟,夏阳.Design of energy-dissipating structure with functionally graded auxetic cellular material[J],International Journal of Crashworthiness,2017
Hou, Wenbin,Shan, Chunlai,Hu, Ping,Zhang, Hongzhe.Multilevel optimisation method for vehicle body in conceptual design[J],INTERNATIONAL JOURNAL OF VEHICLE DESIGN,2017,73(1-3,SI):157-178
Zou, Rui,Xia, Yang,Liu, Shiyi,Hu, Ping,Hou, Wenbin,Hu, Qingyuan,Shan, Chunlai.Isotropic and anisotropic elasticity and yielding of 3D printed material[J],COMPOSITES PART B-ENGINEERING,2016,99:506-513
Hu, Kan,Yu, Ye,Ying, Liang,Hu, Ping,Hou, Wen-Bin.基于校车侧翻安全性的热冲压立柱结构优化设计[J],吉林大学学报（工学版）,2016,47(3):884-890
韩小强,盈亮,王琪,高天涵,胡平,侯文彬.车辆工程大学生创新实践基地建设与实践[J],实验室科学,2016,19(1):165-167
韩小强,王洪宇,侯文彬.基于 FSAE 赛车的空气动力学套件设计及 CFD 分析[J],实验科学与技术,2016,14(1):3-7
韩小强,侯文彬.基于FSAE赛车的空气动力学陶建华设计及CFD分析[J],实验科学与技术,2016,第14卷(第1期):3-7
侯文彬,王飞,侯大军.概念设计阶段车身装配结构多目标优化设计[A],2015,130-130
韩啸,李伟东,胡平,侯文彬.结构胶接接头在湿-热-力耦合环境下的力学性能退化行为建模研究[A],2015,149-149
侯文彬,侯大军,徐金亭,张伟.基于车身装配结构优化的改进图分解算法[J],应用数学和力学,2015,36(5):515-522
Xu J.,Wu J.,Hou W..Parts localization oriented practical method for point projection on model surfaces based on subdivi[J],GIScience and Remote Sensing,2015,12(1):67-75
Zhang, Wei,Hou, Wenbin,Hu, Ping,Ma, Zhengdong.The Nonlinear Compressive Response and Deformation of an Auxetic Cellular Structure under In-Plane[J],ADVANCES IN MECHANICAL ENGINEERING,2015,7(1)
侯文彬,张玉龙,张伟,张红哲.一种汽车LED前照灯散热器的性能分析及优化[J],计算机集成制造系统,2014,20(11):2728-2733
京公网安备 11010802027423号