近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Tian, Xiangyu.Design of pore layout for perforated auxetic metamaterials with low-frequency band gaps[J],Applied Physics Express,2020,13(4)
[2]陈文炯.一种低孔隙率材料负泊松比性能测试实验研究[J],实验室科学,2019,22(3):41-45
[3]陈文炯.粘弹性阻尼复合材料拓扑最佳阻尼性能优化设计[A],第二届中国国际复合材料科技大会 (CCCM-2),2015,471-472
[4]李取浩.考虑脱模约束的拓扑优化算法[A],2013中国力学大会,2013,257-257
[5]陈文炯.面向增材制造的水下连通形多腔体吸声覆盖层优化设计[A],2018年全国固体力学学术会议,2018,1
[6]高仁璟.面向结构形状控制的压电纤维复合薄膜驱动器布局方式与控制参数协同优化设计[J],机械工程学报,2016,18:177-183
[7]张南.含流道微桁架夹层面板隔热性能评估方法[J],复合材料学报,2017,4:850-858
[8]黄毓.周期性两相层状带隙材料优化模型[J],计算力学学报,2012,29(6):811-818
[9]黄毓.周期性两相层状材料带隙性质分析与优化设计[A],中国力学大会2011暨钱学森诞辰100周年纪念大会,2011,1-7
[10]陈文炯.周期性吸声多孔材料微结构优化设计[J],计算力学学报,2013,1:45-50
[11]刘松.基于VR技术的舱室声波传播途径实验教学研究[J],实验室科学,2019,22(4):1-4,9
[12]baiwei.基于映射的拓扑优化最大尺寸控制方法[J],工程力学,2017,34(9):18-26
[13]陈文炯.基于拓扑优化的自发热体冷却用植入式导热路径设计方法[J],力学学报,2016,2:406-412
[14]刘松.基于船用产品隔声指数测量的实验教学研究[J],实验室科学,2022,22(3):24-28,31
[15]刘书田.多孔吸声材料孔结构设计优化[A],2014年全国固体力学学术大会,2022,1-1
[16]陈文炯.多孔材料吸声性能分析与设计优化[A],中国力学大会2011暨钱学森诞辰100周年纪念大会,2022,1-6
[17]陈文炯.多孔材料吸声性能分析与设计优化[J],噪声与振动控制,2022,3:177-182
[18]刘书田.拓扑优化与增材制造结合:一种设计与制造一体化方法[J],航空制造技术,2022,10:26-31
[19]陈文炯.最大模态阻尼系数黏弹性材料微结构拓扑优化设计[A],2013中国力学大会,2022,87-87
[20]李治.翅片打孔对板翅式换热器传热性能和流场影响[J],Journal of Dalian University of Technology,2021,61(1):60-66
[21]刘书田.一种将拓扑优化设计转化为增材制造结构的实现方法[J],Engineering,2018,4(02):243-261
[22]田香玉.CLUSTERING BASED THREE-SCALE CONCURRENT TOPOLOGY OPTIMIZATION WITH MACROSTRUCTURE[J],Applied Physics Express,2021,13(4):45503-
[23]Tian, Xiangyu.Perforation-rotation based approach for band gap creation and enlargement in low porosity archi...[J],COMPOSITE STRUCTURES,2021,245
[24]Tian, Xiangyu,Chen, Wenjiong,Gao, Renjing,Liu, Shutian,Wang, Jiaxing.Design of pore layout for perforated auxetic metamaterials with low-frequency band gaps[J],APPLIED PHYSICS EXPRESS,2020,13(4)
[25]Luo, Yunfeng,Chen, Wenjiong,Liu, Shutian,Li, Quhao,Ma, Yaohui.A discrete-continuous parameterization (DCP) for concurrent optimization of structural topologi...[J],COMPOSITE STRUCTURES,2020,236
[26]刘松,陈文炯,高健桐,黎胜.基于VR技术的舱室声波传播途径实验教学研究[J],实验室科学,2019,22(4):1-4,9
[27]Li, Quhao,Chen, Wenjiong,Wang, Jiaxing,Liu, Shutian.A novel implementation of asymptotic homogenization for viscoelastic composites with periodic m...[J],COMPOSITE STRUCTURES,2019,208:276-286
[28]Chen, Wenjiong,Tian, Xiangyu,Gao, Renjing,Liu, Shutian.A low porosity perforated mechanical metamaterial with negative Poisson's ratio and band gaps[J],SMART MATERIALS AND STRUCTURES,2018,27(11)
[29]Chen, Wenjiong,Tong, Liyong,Liu, Shutian.Design of periodic unit cell in cellular materials with extreme properties using topology optim...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS,2018,232(10):852-869
[30]Liu, Shutian,Li, Quhao,Liu, Junhuan,Chen, Wenjiong,Zhang, Yongcun.A Realization Method for Transforming a Topology Optimization Design into Additive Manufacturin...[J],ENGINEERING,2018,4(2):277-285
[31]陈文炯, 任春晶,刘书田.Design Optimization of Underwater Acoustic Anechoic Layers Under Set Frequency Bands[A],2018
[32]Li, Quhao,Chen, Wenjiong,Liu, Shutian,Fan, Huiru.Topology optimization design of cast parts based on virtual temperature method[J],COMPUTER-AIDED DESIGN,2018,94:28-40
[33]刘书田,李取浩,陈文炯,张永存.拓扑优化与增材制造结合:一种设计与制造一体化方法[J],航空制造技术,2017,10:26-31
[34]Hu, Rui,Chen, Wenjiong,Li, Quhao,Liu, Shutian,Zhou, Ping,Dong, Zhigang,Kang, Renke.Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture...[J],JOURNAL OF AEROSPACE ENGINEERING,2017,30(3)
[35]张南,张永存,陈文炯,吴书豪,刘书田.含流道微桁架夹层面板隔热性能评估方法[J],复合材料学报,2017,34(4):850-858
[36]白伟,李取浩,陈文炯,刘书田.基于映射的拓扑优化最大尺寸控制方法[J],工程力学,2017,34(9):18-26
[37]陈文炯,刘书田.Virtual-Temperature-Method Based Formulation of Topology Optimization for Design of Cast Parts[A],2017
[38]Chen, Wenjiong,Tong, Liyong,Liu, Shutian.Concurrent topology design of structure and material using a two-scale topology optimization[J],COMPUTERS & STRUCTURES,2017,178:119-128
[39]Li, Quhao,Chen, Wenjiong,Liu, Shutian,Tong, Liyong.Structural topology optimization considering connectivity constraint[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(4):971-984
[40]高仁璟,赵剑,陈文炯,刘书田,仝立勇,张莹.面向结构形状控制的压电纤维复合薄膜驱动器布局方式与控制参数协同优化设计[J],机械工程学报,2016,52(18):177-183
京公网安备 11010802027423号