近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Zhao, DongSheng,Huang, ZhenYu,Liu, YuJun,Miao, Tangjun.A Study of the Effect of Post-Heating Pulse on Hot Cracking Susceptibility in Pulsed Laser Welding of Invar Alloy[J],JOURNAL OF SHIP PRODUCTION AND DESIGN,2019,35(4):338-343
[2]杨贵强,刘玉君,李瑞,汪骥.M估计的抗差匹配算法及收敛性分析[J],哈尔滨工程大学学报,2019,40(9):1555-1561
[3]Wang, Shun,Wang, Ji,Liu, Yujun,Li, Rui,Liu, Xiao.Analysis of Forming Regularity in Line Heating Process for Curved Hull Plate by Considering the Plate Deflection[J],JOURNAL OF SHIP PRODUCTION AND DESIGN,2019,35(3):211-219
[4]杨贵强,刘玉君,李瑞,汪骥.考虑安装工艺的多特征模型匹配定位[J],哈尔滨工程大学学报,2018,40(8):1393-1398
[5]赵东升,窦钧,刘玉君.LNG/LPG船耐低温材料的焊接发展综述[J],船舶,2019,30(3):47-56
[6]Feng, Yulong,Wang, Ji,Liu, Yujun,Zheng, Qingrong.Adsorption equilibrium of hydrogen adsorption on activated carbon, multi walled carbon nanotubes and graphene sheets[J],CRYOGENICS,2019,101:36-42
[7]李泽远,汪骥,刘玉君.考虑船体变形的轴系动态校中算法[J],船舶工程,2018,10:59-63
[8]李泽远,汪骥,刘玉君,李瑞,刘晓.艉管后轴承倾斜度对轴承负荷的影响研究[J],船舶工程,2018,09:28-31+80
[9]王顺,汪骥,刘玉君,李瑞.基于整体挠度的船体板成形参数预报系统[J],华中科技大学学报（自然科学版）,2018,46(6):54-58
[10]韦智元,刘玉君,李瑞,汪骥.Numerical and Experimental Research on Distribution and Evolution of Coupling Residual Stresses Induced by Cutting-Welding Continuous Process[J],Journal of Ship Production and Design,2018
[11]Liu, Yujun,Zhang, Fan,Li, Rui,Wang, Ji,Ma, Chi,Han, Xiaogang.Automatic Design Method and Application in Complex Ship Block Lifting[J],JOURNAL OF SHIP PRODUCTION AND DESIGN,2017,33(4):283-290
[12]赵东升,黄震宇,缪唐军,刘玉君.激光焊接工艺参数对温度场及力学性能的影响[J],实验室科学,2017,20(5):61-63
[13]赵东升,黄震宇,缪唐军,刘玉君.脉冲激光焊接温度场的红外热成像法测量[J],实验室科学,2017,20(4):16-18
[14]刘玉君,张生俊,汪骥.考虑工艺要求的船舶推进轴系校中改进算法研究[J],中国造船,2017,58(2):138-144
[15]Zhang, Xuebiao,Chen, Cheng,Li, Jiaqin,Liu, Yujun.The Numerical Study of Steel Plate Forming by Moveable Induction Heating Considering the Plate Edge Shrinkage[J],JOURNAL OF SHIP PRODUCTION AND DESIGN,2017,33(2):166-177
[16]赵东升,黄震宇,缪唐军,刘玉君.焊接残余应力的非接触无损测量实验[J],实验室科学,2017,20(2):26-28
[17]赵东升,黄震宇,缪唐军,刘玉君.分层脉冲激光焊接实验教学研究[J],实验技术与管理,2017,34(4):175-177
[18]Zhang, Xuebiao,Chen, Cheng,Liu, Yujun.Numerical analysis and experimental research of triangle induction heating of the rolled plate[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2017,231(5):844-859
[19]Zhou, Bo,Han, Xiaoshuang,Guo, Wei,Liu, Yujun,Tan, Soon-Keat.Numerical and Experimental Study on Cutting Access Opening in Ship Structure[J],JOURNAL OF SHIP PRODUCTION AND DESIGN,2017,33(1):12-23
[20]祁明浩,张雪彪,刘玉君.应用固有应变法计算焊接变形时材料模型的选择研究[J],船舶工程,2017,39(9):58
[21]赵东升,刘玉君.脆性温区冷却速率对殷瓦钢焊接热裂纹的影响[A],2017
[22]Wang Ji,Wang Shun,Liu Yujun,Li Rui,Liu Xiao.Numerical simulation of hull curved plate forming by electromagnetic force assisted line heating[A],2017 INTERNATIONAL CONFERENCE ON MATERIAL ENGINEERING AND MANUFACTURING (ICMEM 2017),2017,265(1)
[23]刘玉君,王力占,李瑞.船舶建造车间环境质量分析[J],造船技术,2016,6:15-22,39
[24]汪骥,王兆麒,李瑞,刘玉君,宋宜伦.重大件货物系固绑扎方案中倾覆力计算方法[J],造船技术,2016,6:45-49
[25]赵东升,闫久春,黄震宇,刘玉君.钛合金与不锈钢真空热轧连接界面微观结构及性能[J],焊接学报,2016,37(12):53-56
[26]王顺,汪骥,刘玉君,刘晓.水火弯板整体变形的数值计算研究[J],造船技术,2016,5:21-26
[27]李瑞,汪骥,韩小岗,刘玉君.基于粒子群算法的船体分段吊装方案优化设计方法研究[J],中国造船,2016,57(3):185-197
[28]汪骥,陈昌毅,李瑞,刘玉君.基于复合电沉积钢基超疏水表面制备工艺研究[J],华中科技大学学报（自然科学版）,2016,44(7):46-51
[29]王顺,刘玉君,汪骥,刘晓.考虑整体挠度的水火弯板成形规律与模型[J],华中科技大学学报（自然科学版）,2016,44(7):30-35
[30]张生俊,汪骥,刘玉君,李瑞.船舶推进轴系校中软件开发研究[A],2016年中国造船工程学会MIS/S&A学术交流会议,2016,23-28
[31]汪骥,李瑞,刘玉君,武江涛.电磁力辅助铝板线加热成形的关键技术研究[J],华中科技大学学报（自然科学版）,2016,44(1):92-97
[32]汪骥,王飞翔,李瑞,刘玉君,薛冬新,顾圣骏.大型船舶推进轴系轴承位移调整优化及负荷预报方法研究[J],中国造船,2016,56(4):152-160
[33]汪骥,李瑞,刘玉君,薛冬新.大型船舶推进轴系轴承位移调整优化及负荷预报方法研究[J],中国造船,2016,56(4):152-160
[34]王顺,刘玉君,汪骥,于泽桐.自升式平台桩腿建造柔性胎架设计与力学分析[J],中国海洋平台,2015,30(5):42-47
[35]李瑞,汪骥,刘玉君,马驰,韩小岗.船体分段复杂吊装方案自动化设计方法及应用[J],计算机集成制造系统,2015,21(12):3119-3126
[36]汪骥,帅涛,刘玉君,李瑞.Tribon环境下船体分段拼板图自动设计方法研究[J],造船技术,2015,3:90-95
[37]张雪彪,陈诚,刘玉君,张立卫.钢板移动式感应加热的多场耦合数值分析[J],哈尔滨工程大学学报,2015,36(4):473-478
[38]Zhao, DongSheng,Liu, YuJun,Wang, XianDong,Ji, ZhuoShang.The Calculation and Measurement of Welding Residual Stress for Invar Steel of a Liquefied Natural Gas Carrier's Containment System[J],JOURNAL OF SHIP PRODUCTION AND DESIGN,2015,31(1):43-48
[39]Li R.,Wang J.,Liu Y.J.,Zhang F.,Ma C.,Han X.G..Automatic design method and application in complex ship block lifting[A],International Conference on Computer Applications in Shipbuilding 2015, ICCAS 2015,2015,3:115-121
[40]赵东升,刘玉君.The calculation and measurement of welding residual stress for invar steel of a liquefied[J],Journal of Ship Production and Design,2015,31(1):43-48
[41]李瑞,张小明,刘玉君,汪骥.船舶分段吊运设计中的眼板布置算法研究[J],武汉理工大学学报（交通科学与工程版）,2014,38(5):1097-1101
[42]陈诚,张雪彪,刘玉君,汪骥.钢板移动式感应加热过程工艺参数分析与局部变形预测[J],中国舰船研究,2014,5:121-128
[43]赵东升,闫久春,刘玉君,纪卓尚.采用铌中间层的钛合金与不锈钢的真空热轧连接界面的显微组织及性能[J],中国有色金属学报（英文版）,2014,24(9):2839-2844
[44]韦智元,刘玉君,汪骥.切割、焊接连续加工残余应力演变过程研究[A],中国造船工程学会船舶力学学术委员会第八次全体会议论文集中国造船工程学会船舶力学学术委员会,2014,401-407
[45]Zhou, B.,Han, X.,Tan, S-K,Liu, Y.,Wei, Z..NUMERICAL AND EXPERIMENTAL STUDY ON PLATE FORMING USING THE TECHNIQUE OF LINE HEATING[J],INTERNATIONAL JOURNAL OF MARITIME ENGINEERING,2014,156:265-275
[46]Wu J.,Wang J.,Liu Y.,Liu Q.,Zhang L..Design of technological parameters for electromagnetic force assisted line heating based on numerical simulation[A],24th International Ocean and Polar Engineering Conference, ISOPE 2014 Busan,2014,72-79
[47]李瑞,张小明,张帆,刘玉君.计算机辅助船体分段吊装强度计算方法及系统开发[J],船舶工程,2014,S1:162-165
[48]汪骥,刘玉君,刘强,张利军,石兵.电磁力辅助水火弯板工艺电路参数影响规律研究[J],造船技术,2014,2:39-42
[49]曲智,汪骥,刘玉君,韦智元,顾圣骏.基于电阻应变片法的船舶推进轴系负荷测试方法研究[J],造船技术,2014,1:43-46
[50]Li R.,Liu Y.J.,Wang J.,Zhang F.,Zhang X.M..Research on the intelligent design method of block lifting in shipbuilding[A],International Conference on Computer Applications in Shipbuilding 2013, ICCAS 2013,2013,2:183-188
[51]Wang J.,Gu S.,Liu Y.-J.,Wei Z.,Qu Z..Development of marine propulsion shafting load measurement and calculation system[A],International Conference on Computer Applications in Shipbuilding 2013, ICCAS 2013,2013,1:155-160
[52]韦智元,刘玉君,李瑞,纪卓尚.基于数值计算的切割焊接连续加工残余应力演变过程[J],计算机集成制造系统,2013,19(9):2244-2250
[53]李瑞,张小明,刘玉君,汪骥.Tribon环境下的吊运眼板快速建模方法研究[J],造船技术,2013,4:13-16
[54]李瑞,张帆,刘玉君,姜福茂,窦钧.计算机辅助船舶分段吊装方案设计系统[J],计算机集成制造系统,2013,19(8):1942-1947
[55]赵东升,吴国强,刘玉君,孙敏科,纪卓尚.预拉伸法降低异种钢焊接残余应力的作用研究[J],船舶力学,2013,17(8):920-924
[56]汪骥,刘玉君,石兵.电磁力辅助水火弯板工艺电路设计研究[J],大连理工大学学报,2013,53(4):532-536
[57]赵东升,闫久春,刘玉君.金属间化合物对钛合金与不锈钢的热轧焊过渡接头耐热性的影响[J],中国有色金属学报（英文版）,2013,23(7):1966-1970
[58]刘玉君,丰军华,李瑞,姜福茂.焊接顺序对底板结构变形影响的数值研究[J],热加工工艺,2013,42(11):189-191
[59]赵东升,吴国强,刘玉君,刘文,纪卓尚.焊接残余应力对Invar钢疲劳寿命影响分析[J],焊接学报,2013,34(4):93-95,108
[60]Zhou, Bo,Liu, Yu-jun,Tan, Soon-Keat.Efficient simulation of oxygen cutting using a composite heat source model[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2013,57(1):304-311
[61]汪骥,刘玉君.电磁力辅助水火弯板工艺装置控制电路设计[J],电气工程与自动化,2013,2(3):31-37
[62]汪骥,刘玉君.The Design and Simulation of Circuit for Electromagnetic Force Assisted Line Heating Device[J],Advanced Materials Research,2013,652:2010-2018
[63]张帆,李瑞,刘玉君,姜福茂,窦钧.计算机辅助船舶分段吊装方案设计系统研究[A],2012年第二届全国现代制造集成技术学术会议,2012,1-8
[64]韦智元,刘玉君,纪卓尚.基于数值计算的切割焊接连续加工残余应力演变过程研究[A],2012年第二届全国现代制造集成技术学术会议,2012,1-8
[65]Zhao D.,Sun M.,Liu Y.,Ji Z..Effect of residual stress on the vibration failure of dissimilar steels joint[J],China Welding (English Edition),2012,21(2):48-51
[66]Zhang, Xue-biao,Yang, Yu-long,Liu, Yu-jun.The Numerical Analysis of Temperature Field During Moveable Induction Heating of Steel Plate[J],JOURNAL OF SHIP PRODUCTION AND DESIGN,2012,28(2):73-81
[67]赵东升,刘玉君,孙敏科,纪卓尚,邓艳萍.碳钢与304不锈钢焊接残余应力的计算[J],焊接学报,2012,33(1):93-95
[68]汪骥,刘玉君,鲁大鹏,邓燕萍.船舶建造过程绿色度评价方法研究[J],大连理工大学学报,2012,52(2):221-226
[69]张雪彪,杨玉龙,刘玉君.钢板高频感应加热过程电磁-热耦合场分析[J],大连理工大学学报,2012,52(5):676-682
[70]Li R.,Liu Y.,Wei Z.,Hu Q..Ultimate bearing capacity research on hybrid-junction scaffold[A],2012 3rd International Conference on System Science, Engineering Design and Manufacturing Informatization, ICSEM 2012,2012,1:88-92
[71]汪骥,刘玉君.Research on Flexible Jig for Leg Manufacturing of Jack-up[A],2012
[72]张雪彪,杨玉龙,刘玉君.船体板高频感应加热过程电磁热耦合分析[J],大连理工大学学报,2012,52(5):676-682
[73]韦智元,刘玉君,周波,黄浩.钢结构氧气切割开孔残余应力数值分析与实验研究[J],大连理工大学学报,2012,52(3):373-380
[74]张光发,刘玉君,纪卓尚.基于Excel-VBA的大型船舶纵向下水计算通用程序设计[J],大连理工大学学报,2012,52(1):47-53
[75]杨玉龙,张雪彪,刘玉君.船体板高频感应加热的多场耦合数值分析[J],船海工程,2011,40(6):24-27
[76]Wang, J.,Liu, Y.,Li, Y.,Li, R.,Deng, Y..Research on the weight control technique in the manufacturing of offshore engineering structure[J],Advanced Materials Research,2011,314-316:2140-2151
[77]Li, R.,Liu, Y.,Hamada, K..Research on the ITOC based solutions for ship-piping jobshop scheduling[J],Advanced Materials Research,2011,314-316:2046-2054
[78]Zhang, Xue-biao,Liu, Yu-jun,Yang, Yu-long,Ji, Zhuo-shang,Deng, Yan-ping.Technical Parameter Analysis of High-Frequency Induction Heating Applied to Steel Plate Bending[J],JOURNAL OF SHIP PRODUCTION AND DESIGN,2011,27(3):99-110
[79]张雪彪,杨玉龙,刘玉君,纪卓尚,邓燕萍.钢板弯曲工艺中的高频感应加热过程数值分析[J],中国造船,2011,52(2):108-116
[80]张雪彪,杨玉龙,刘玉君.基于完全线加热成形的钢板弯曲成形自动化研究[A],中国造船工程学会造船工艺学术委员会2011造船企业精益生产学术研讨会,2011,169-174
京公网安备 11010802027423号