近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
谢蓉.混流泵叶轮流动性能计算和叶型优化设计[J],排灌机械工程学报,2022,28(4):20-22
谢蓉.强迫油循环冷却变压器内部温度场数值模拟[J],电力科学与工程,2022,28(10):47-52
谢蓉.基于近似模型核主泵模型泵水力模型优化设计[J],工程热物理学报,2022,37(7):1427-1431
谢蓉.基于Aspen 的超临界CO2布雷顿循环性能研究[J],Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics,2021,42(10):2544-2552
谢蓉.基于并网要求的永磁直驱风力发电系统建模仿真与研究[A],2021
谢蓉.Numerical investigation on the performances of the last three stages in an industrial steam turbi...[A],2021
谢蓉.STUDY ON CALCULATION METHOD OF COOLING OIL FLOW RATE ALLOCATION FOR NATURAL OIL CIRCULATION TRA...[A],2021,2
丛庆丰,姜晓武,杨金广,谢蓉.轴流涡轮准一维性能分析方法研究[A],2018,8
Xie, Rong,Wang, Hao,Xu, Baopeng,Wang, Wei.A REVIEW OF IMPINGEMENT JET COOLING IN COMBUSTOR LINER[A],2018,5C-2018:69-79
从庆丰,姜晓武,杨金广,谢蓉.轴流涡轮准一维性能分析方法研究[A],2018
程中林,谢蓉,杨金广,张靖旋.基于S1 流面的叶轮机械准三维流动计算程序开发[A],2018
周方明,王晓放,徐胜利,谢蓉,于洪昌,雍兴平,仲作文.错列导叶对反应堆冷却剂泵水力性能的影响[J],风机技术,2017,1:7-17
Xie, Rong,Hao, Muting,Guan, Liang,Shi, Yanjun.Multidisciplinary Analysis Transient Flow Effects on the Impeller in a Semi-open Centrifugal Im...[A],2017,396-401
Lu, Yeming,Wang, Xiaofang,Xie, Rong.Derivation of the Mathematical Approach to the Radial Pump's Meridional Channel Design Based on...[J],MATHEMATICAL PROBLEMS IN ENGINEERING,2017,2017
Shi, Yanjun,Sun, Xueyan,Chen, Wang,Xie, Rong,Zheng, Xiaojun.A Co-evolutionary Framework for Concurrent Design of Machines Layout and AGVs Planning[A],2017,498-502
谢蓉,史彦军.Multidisciplinary Analysis of Transient Flow Effects on the Impeller in a Semi-open Centrifugal ...[A],2017,396-401
谢蓉,杨金广.一种无壁面距离的SA湍流模型的求解方法[A],2017
Xu, Baopeng,Liu, Ya,Xie, Rong.LARGE EDDY SIMULATION OF A REALISTIC GAS TURBINE COMBUSTOR[A],2016,4B-2016
郝苜婷,谢蓉,关亮.时序效应对离心压缩机叶片非定常气动负荷影响[J],风机技术,2016,58(1):15-21,40
郝苜婷,关亮,谢蓉,郝苜婷.时序效应对离心压缩机叶片非定常气动负荷影响[J],风机技术,2016,58(252):15-21
谢蓉,郝苜婷,金伟楠,王晓放,程中林,鲁自富.基于近似模型核主泵模型泵水力模型优化设计[J],工程热物理学报,2016,37(7):1427-1431
Rong Xie,Yongfeng Sui,Xudong Ding,Xiaofang Wang,Wei Wang,Zhaojun Sha,Muting Hao,65. Rong Xie.Unsteady Study on the Performance in a Low-pressure Turbine Stages with Tip clearance under Desig...[C],2015
郝苜婷,谢蓉,关亮.时序效应对离心压缩机叶片非定常气动负荷影响[A],2015,1-8
谢蓉,王晓放.基于近似模型的核主泵模型泵水力模型优化设计[A],2015
谢蓉,祁恒,单玉姣,金伟楠.AP1000核主泵模型泵导叶水力设计与数值优化[J],排灌机械工程学报,2014,32(12):1029-1034
谢蓉,关亮,杨勇.串列叶栅扩压器第一列叶片出口角对性能的影响[J],风机技术,2014,3:22-25,31
Xie Rong, Yanjun Shi, Guan Liang, Hao Muting,Xie Rong.Study on Unsteady Flow Collaborative Characteristics of semi-open impeller and diffuser in a Cent...[C],Proceedings of the 2014 IEEE 18th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2014,2014,727-732
He, Yongle,Miao, Weidong,Xie, Rong,Shi, Yanjun.A Tabu Search Algorithm with Variable Cluster Grouping for Multi-depot Vehicle Routing Problem[A],2014,12-17
Xie, Rong,Hao, Muting,Guan, Liang,Shi, Yanjun.Study on Unsteady Flow Collaborative Characteristics of semi-open impeller and diffuser in a Ce...[A],2014,727-732
谢蓉,张新强,张星,王长胜,刘恩洲,李文红.油浸式变压器高压绕组内温度场和流场的数值研究[J],变压器,2014,51(4):8-11
Bao P.F.,Miao W.D.,Xie R.,Shi Y.J..A BP-ANN based surrogate modeling for predicting engineering analysis of forging press[A],2014,915-916:987-991
Xie R.,Qi H.,Shen F.,Jin W.,Shi Y..Modelling design and blade profile optimization for a mixed-flow pump impeller[J],Energy Education Science and Technology Part A: Energy Science and Research,2014,32(2):1099-1106
Xie R.,Hao M.,Guan L.,Miao W.,Shi Y..Study on methods of numerical simulation of transient flow in the semi-open impeller stage of a c...[J],Energy Education Science and Technology Part A: Energy Science and Research,2014,32(2):1085-1092
谢蓉.Numerical Analysis for Blade Loading of Centrifugal Compressor under Multi-operating Conditions[J],Information Technology Journal,2014,13(2):286-293
谢蓉,关亮,王晓放,郝苜婷.多工况下离心压缩机叶片承载的流固耦合效应分析[J],风机技术,2013,5:22-27
谢蓉,金伟楠,单玉姣,祁恒.AP1000核主泵模型泵导叶水力设计与优化[A],2013,1-6
谢蓉,郝苜婷,王晓放,关亮,谢蓉.多工况下离心压缩机叶片承载的流固耦合效应分析[J],风机技术,2013,55(30-35):22-27
田夫,孙涛,谢蓉,王晓放.工科院校生产实习工作的问题及建议[J],实验技术与管理,2012,29(12):179-182
谢蓉,张星,关亮,徐胜利.强迫油循环冷却变压器内部温度场数值模拟[J],电力科学与工程,2012,28(10):47-52
谢蓉,高博,赵锐.非对称可逆轴流风机S型翼型的设计与性能研究[J],风机技术,2012,2:12-17
宿晓辉,刘艳,张凯琳,赵镛,王巍,谢蓉,赵广.基于非结构化网格有限体积的LBM[J],大连理工大学学报,2012,52(6):809-815
孙涛,王毅,王晓放,谢蓉,马震岳.变厚度叶片对离心压缩机结构强度和性能影响[J],大连理工大学学报,2012,52(1):29-34
杨凤珍,谢蓉,高欣,王晓放,孙涛.开放式研究型专业实验教学模式的探索[J],实验技术与管理,2011,28(8):23-25
Yang, Yong,Xie, Rong,Gong, Lu-yuan,Hai, Yang.Study of Influence of Diffuser Meridian Channel Shape on Performance of Micro-Gas Turbine Centr...[A],2011
Xie, Rong,Guan, Liang,Yang, Feng-zhen,Yang, Bo.Numerical simulation on the mixture of multi-inlet vertical jet and mainstream in reactor[A],2011
Xie, Rong,Shen, Fei,Wang, Xiao-fang,Shan, Yu-jiao.A new CFD-based method study on modelling design of nuclear main pump impeller[A],2011
王晓放,谢蓉.A new CFD-based method study on modelling design[A],2011
沈胜强,谢蓉.水电联产系统汽轮机组的变工况计算与分析[A],2011
王宗伟,谢蓉,王晓放.大连市建设潮汐电站的可行性分析[J],节能,2010,29(8):11-14
谢蓉,单玉姣,王晓放.混流泵叶轮流动性能数值模拟和叶型优化设计[J],排灌机械工程学报,2010,28(4):295-299
谢蓉,杨勇,海洋,黄钟岳.离心压气机错排叶栅扩压器性能研究[J],燃气轮机技术,2010,23(2):48-52
Yu, Yang,Wang, Xiao-fang,Xie, Rong,Wang, Zong-wei.Numerical Investigation on the Effect of Cooling Steam on the Erosion to the Flue Gas Turbine I...[A],2010
Wang, Zong-wei,Xie, Rong,Wang, Xiao-fang,Yu, Yang.Numerical Study on Influence of Moving Blade Installation Angles on Performances of a Flue Gas ...[A],2010
谢蓉,王晓放.Fractural Damage Analysis and Optimized Improvement for Last Stage Moving Blades in ECST[A],2010
谢蓉,王晓放.基于CFD核主泵叶轮模化设计新方法研究[A],2010
谢蓉,王晓放.混流泵叶轮流动性能计算和叶型优化设计[J],排灌机械工程学报,2010,28(4):20-22
谢蓉,王晓放.烟气轮机变工况性能的研究与分析[A],2010
Xie, Rong,Shan, Yu-jiao,Wang, Xiao-fang,Li, Liang.Numerical Study and Structural Improvement on Mixed-Flow Pump Impeller[A],2010
谢蓉,海洋,王晓放.分流叶片周向位置设计及其对离心叶轮内部流动的影响[J],燃气轮机技术,2009,22(2):37-41
王晓放,李丽丽,孙涛,谢蓉,薛家好.动车组轴流冷却风机气地动设计与研究[J],大连理工大学学报,2009,49(3):364-368
京公网安备 11010802027423号