近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
Mu, L. Z.,Gao, G.,Zhang, P. D.,Ji, C. J.,He, Y.,Li, X. Y.,Chi, Q. Z.,Yang, S. Q..Experimental and numerical study of the effect of pulsatile flow on wall displacement oscillati...[J],ACTA MECHANICA SINICA,2019,35(5):1120-1129
Li, Chunyang,Ji, Chunjun,Shi, Mao,Sun, Qi.Influence of rotor-stator component partition structure on the aerodynamic performance of centr...[J],ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS,2019,13(1):1080-1094
冀春俊,张雪薇,姚卡,房骏翌,刘君男,牛哲.基于NREC的新型氧气风机设计与流场分析[J],风机技术,2018,60(S1):1-6
Ji, Chunjun,Li, Chunyang,Fang, Junyi,Sun, Qi.Loss Mechanism of Static Interstage Components of Multistage Centrifugal Compressors for Integr...[J],MATHEMATICAL PROBLEMS IN ENGINEERING,2018,2018
冀春俊,孙淼,徐浩,卜庆团,孙琦.离心压缩机扩压器进口流动研究[J],风机技术,2017,59(5):26-31
凌敬,季振勤,冀春俊,刘乾坤.叶栅稠度对多翼离心风机性能影响的研究[J],风机技术,2017,59(3):29-33
冀春俊,徐浩,孙琦,孙淼.基于Kriging模型的快速拆装叶轮轮盘多目标优化设计[J],风机技术,2017,59(3):44-48
张阳,冀春俊,刘雷,张守立,朱少辉,林琳,孙卉.径向导叶与空间导叶的优劣分析与试验[J],热科学与技术,2017,16(5):425-430
冀春俊.基于 Kriging 模型的快速拆装叶轮轮盘多目标优化[J],风机技术,2017,59(3):41-45
冀春俊.离心压缩机叶片扩压器进口安装角对流动的影响[A],2017,D2017005
Sun, Qi,Ji, Chunjun,Fang, Junyi,Li, Chunyang,Zhang, Xiaolin.Optimization Design of IGV Profile in Centrifugal Compressor[J],MATHEMATICAL PROBLEMS IN ENGINEERING,2017,2017
冀春俊,冀文慧,孙琦,高亚威.基于ANSYS的离心风机叶轮结构优化研究[J],风机技术,2016,6:49-52
冀文慧,冀春俊,孙琦,赵宝德,徐养卓.系列化双吸硫酸风机通用蜗壳的设计及性能分析[J],风机技术,2016,58(2):42-46
冀春俊,孙琦,范朝阳,孙淼,冀文慧.离心压缩机进口导叶叶型的进一步研究[J],热科学与技术,2016,15(5):386-390
Ji, Chunjun,Sun, Qi,Fan, Zhaoyang,Gao, Yawei,Zhao, Baode.Study of high efficiency flow regulation of VIGV in centrifugal compressor[J],International Journal of Rotating Machinery,2016,2016
冀春俊,那淼,孙玉莹,李秀刚.高马赫数离心压缩机模型级叶轮叶型优化[J],风机技术,2015,57(2):37-41,47
冀春俊,高健,冀文慧,李秀刚.压缩机进气室优化设计改进[J],风机技术,2014,6:39-43
王清,冀春俊,董闯,王英敏,张瑞谦,郭晓雷.高强铁素体时效不锈钢成分设计[J],材料热处理学报,2014,35(4):72-77
冀春俊,赵宝德,冀文慧,孙琦.泵导叶出口宽度改型设计的变工况计算及实验研究[J],热科学与技术,2014,13(1):81-86
冀春俊,刘洋,武斌.回流器冲角对于压缩机模型级性能影响的研究*[J],风机技术,2013,4:11-16
于晶晶,王清,李晓娜,石尧,董闯,冀春俊,徐香明.基于团簇结构模型的镍基高温合金成分设计[J],材料热处理学报,2013,34(8):184-188
冀春俊,赵宝德,龚绍海,王平,张阳.基于CFD的超临界锅炉给水泵变工况模拟及轴向力预测[J],水泵技术,2013,03:22-26
冀春俊,张阳,冀文慧,范朝阳.某离心式压缩机可调进口导叶叶型研究[J],热科学与技术,2013,12(2):131-134
Wang, Qing,Wang, Yingmin,Qiang, Jianbing,Dong, Chuang,Ji, Chunjun.beta-Ti Alloys with Low Young's Moduli Interpreted by Cluster-Plus-Glue-Atom Model[J],METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,2013,44A(4):1872-1879
王清,李晓娜,冀春俊,董闯.Designing Multi-Component b-Ti Alloys with Low Young’s Modulus[A],2013,747(2):885-889
王清,冀春俊,王英敏,羌建兵,董闯.b-Ti Alloys with Low Young’s Moduli Interpreted by Cluster-Plus-Glue-Atom Model[J],Metal. Mater. Trans. A,2013,44(4):1872-1879
刘恩雪,王清,马仁涛,查钱锋,冀春俊,董闯.低Nb含量Ti-Mo-Nb-Zr-Sn BCC低弹性模量固溶体合金的成分设计[J],中国有色金属学报,2012,22(12):3378-3385
王清,查钱锋,刘恩雪,董闯,王学军,谭朝鑫,冀春俊.基于团簇模型的高强度马氏体沉淀硬化不锈钢成分设计[J],金属学报,2012,48(10):1201-1206
Li, Baozeng,Wang, Qing,Wang, Yingmin,Zuo, Liqiang,Qiang, Jianbing,Li, Xiaona,Ji, Chunjun,Guo, Xiaolei,Dong, Chuang.A ferrite stainless steel Cr27Mo6Al3Cu with oxidation resistance[J],MATERIALS & DESIGN,2012,40:171-175
Wang, Qing,Zhang, Xiangdong,Li, Xiaona,Ji, Chunjun,Dong, Chuang.Designing Multi-Component beta-Ti Alloys with Low Young's Modulus[A],2012,747-748:885-+
Li, Baozeng,Wang, Yingmin,Qiang, Jianbing,Dong, Chuang,Gu, Junjie,Wang, Qing,Ji, Chunjun.Cluster formula of Fe-containing Monel alloys with high corrosion-resistance[J],MATERIALS CHARACTERIZATION,2012,68:94-101
冀春俊,李彩华,庸洪杰.叶片断裂破坏与气动非定常脉动的关联分析[J],风机技术,2012,2:9-11,41
冀春俊,高国红,张守立,张鑫太.混流泵叶轮的水利设计方法研究[J],水泵技术,2012,1:23-27
Li, Baozeng,Wang, Qing,Wang, Yingmin,Li, Chunyan,Qiang, Jianbing,Ji, Chunjun,Dong, Chuang.Cu-Containing Fe-Ni Corrosion-Resistant Alloys Designed by a Cluster-Based Stable Solid Solutio...[J],METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,2012,43A(2):544-554
冀春俊,李晓庆,余道刚.增压器压气机流动分析与全工况优化[J],流体机械,2012,40(1):26-30,21
Ji, Chunjun,Zhou, Qi.Study of The Interference Between The Diffuser Vanes With The Volute Tongue[A],2011,455-456:1037-1041
Ji Chun-jun,Li Xiao-qing.Aerodynamic Optimization Design of a Turbocharger Compressor Impeller[A],2011,455-456:389-394
Ji C.,Wang Y..The design and flow simulation of the volute casing of a mixed flow pump[A],2011,2:820-823
裴威,冀春俊,王学军,么立新.闭式小流量模型级无叶扩压器改进设计[J],风机技术,2011,2:3-5,49
冀春俊.Study of the Interference Between The Diffuser Vanes with The Volute Tongue[A],2011,377-379
冀春俊.The Numerical Analysis on Nox Emissions of Gas Turbine Combustor[A],2011,373-376
冀春俊.Aerodynamic Optimization Design of a Turbocharger Compressor Impeller[A],2011,369-372
Wang P.,Ji C.,Tang B.,Song X..Effect of common rail system on vehicle engine combustion performance[A],2010,1:464-467
刘艳,李宇峰,冀春俊.600MW空冷汽轮机组低压排汽缸流场模拟和结构优化[J],汽轮机技术,2010,52(5):329-332
冀春俊,甄咏鹏,王澄宇,刘卫兵.核电站余热排出泵导叶的设计探索[J],水泵技术,2010,03:28-31
冀春俊,王澄宇,刘卫兵,范苏月.压气机失速研究及设计方法的讨论[J],内燃机与动力装置,2010,2:1-4
冀春俊,宋风强,甄咏鹏.喷淋泵诱导轮内部流动的数值分析[J],四川兵工学报,2010,31(3):71-74
王平,冀春俊,唐斌,宋希庚.Effect of Common Rail Vehicle Engine Combustion Performance[A],2010,1:464-467
王博珺,赵衡,庞志梅,郎肖,冀春俊.后置导叶对斜流泵性能的影响及分析[J],水泵技术,2009,06:28-31
冀春俊,王宇.离心压缩机末级扩压器与排气蜗壳集成优化[J],风机技术,2009,6:3-6,25
吴东坡,陈健,王立博,陈曦,冀春俊.离心压缩机级间抽气结构优化设计[J],风机技术,2009,5:34-38
刘艳,李宇峰,冀春俊.60万千瓦空冷汽轮机组低压排汽缸流场模拟和结构优化[A],2009,1-7
冀春俊,王杨,冀文慧.压缩机旋转失速发展传播的计算分析[J],热能动力工程,2009,24(3):291-295
冀春俊,王雅君,王学军,么立新.离心压缩机排气蜗壳内部流动分析与优化[J],机械工程学报,2009,45(5):311-316
冀春俊,王宇.离心压缩机末级最佳D4/D2值的数值研究[J],流体机械,2009,37(4):14-17,8
冀春俊,刘赫,陈曦.叶片扩压器对小流量模型级性能的影响[J],风机技术,2009,1:8-9,12
冀春俊,任建新.燃气轮机回流式燃烧室内部流动数值分析[A],2009,1-5
冀春俊,任建新.燃气轮机回流式燃烧室内两相流动数值模拟及分析[J],热科学与技术,2008,7(4):349-353
冀春俊,刘丰庆,余道刚.压缩机中间抽气结构优化设计[J],热能动力工程,2008,23(6):591-594
Ji Chunjun,Yu, Wang.NUMERICAL STUDY OF THE MATCHING OF THE VOLUTE WITH THE LAST STAGES CENTRIFUGAL COMPRESSOR[A],2008,10(PART B):1363-1372
冀春俊,王杨.压缩机首级非定常流动计算分析[A],2008,1-6
冀春俊,李佳娜,王学军,赵衡.离心压缩机级间加气的出口流场特性[J],西安交通大学学报,2008,42(3):273-276,285
冀春俊.NUMERICAL STUDY OF THE MATCHING OF THE VOLUTE WITH THE LAST STAGES CENTRIFUGAL COMPRESSOR[A],2008,10:1363-1372
冀春俊,张鹏刚.应用CFD技术解决轴流压缩机放空管路振动噪声问题[J],风机技术,2007,5:59-62
Ji, Chunjun,Wang, Yajun,Yao, Lixin.Numerical analysis and optimization of the volute in a centrifugal compressor[A],2007,1352-1356
冀春俊,周子筠.电站给水泵汽轮机头部流场的数值计算与结构改进[J],热能动力工程,2007,22(5):500-503
冀春俊,陈曦,么立新.小流量模型级扩压器对性能影响的研究[J],风机技术,2007,4:8-11
么立新,冀春俊.离心式压缩机小流量级分析与优化设计[J],风机技术,2006,3:18-22
冀春俊,崔海涛.汽轮机通流部分数值模拟与分析[A],2005,Vol.25:4
冀春俊,陈曦,张英姿.入口角对等离子体煤气化反应率的影响研究[A],2005,Vol.25:5
冀春俊,肖蕾.离心压缩机小流量级扩压器的分析与优化[J],风机技术,2005,2:15-17
冀春俊,周民,周子筠.轴向涡流燃烧器内部流动数值分析[J],热科学与技术,2005,4(1):67-71
冀春俊,徐世泊,于飞.燃气轮机燃烧室内部两相流动数值模拟与结构优化[J],动力工程,2004,24(5):698-702
张鹏刚,冀春俊.离心式压缩机模型级流场的数值模拟研究[A],2004,195-199
冀春俊,肖蕾.小流量离心压缩机内部流动数值分析与优化[A],2004,200-205
冀春俊,徐世泊.燃气轮机燃烧室内部流场的冷态模拟与优化设计[J],热科学与技术,2004,3(2):139-142
冀春俊,安邦贤,孙晋.压气机进气弯管流场的计算与分析[J],内燃机车,2003,3:7-10,13
冀春俊,孙晋,张英姿.等离子体煤气化反应器内部流动数值模拟及设计优化的初步研究[J],煤化工,2002,30(3):17-22
沈胜强,冀春俊,陈冰,Abuliti Abudula.有扰流片的矩形通道内空气流动和传热过程的数值模拟[J],热科学与技术,2002,1(1):20-23
冀春俊,闫清,孙晋.压气机旋转失速数值模拟和流动显示[J],大连理工大学学报,2001,41(5):561-567