当前位置: X-MOL首页全球导师 国内导师 › 田江平

个人简介

教育经历 2002.9 2009.7 大连理工大学 动力机械工程 博士 1998.9 2002.7 大连理工大学 热能与动力工程 学士 1995.9 1998.7 河北正定正学 工作经历 2018.12 至今 大连理工大学能源与动力学院 教授 2013.12 2018.12 大连理工大学能源与动力学院 副教授 2011.9 2013.12 大连理工大学能源与动力学院 讲师 2009.8 2011.9 大连理工大学机械工程流动站 博士后

研究领域

内燃机流动、喷雾、燃烧光学诊断技术 内燃机高效清洁燃烧技术 动力机械燃烧理论

近期论文

查看导师最新文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

向立明.柴油机交叉孔喷嘴自由喷雾特性实验研究[J],汽车工程,2022,40(11):1275-1281,1293 冯立岩.气体燃料船用主机工作过程三维数值模拟[J],哈尔滨工程大学学报,2022,7:807-813,856 田江平.汽油超高压喷雾宏观特性可视化研究[A],中国工程热物理学会2015学术年会,2022 田江平.点火室射流引燃预 混合气燃烧过程特性研究[A],中国内燃机学会2017 年学术年会暨燃烧节能净化分会联合学术年会,2022 田江平.点火室式直喷汽油机燃烧系统的研究Ⅱ点火室内混合气形成过程[J],Transactions of Csice,2022,28(4):309-315 田江平.点火室结构对射流引燃预混合气过程影响研究[A],WICE2018世界内燃机大会,2022 Yi, Ping.Development of an improved hybrid multi-component vaporization model for realistic multi-compon...[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2022,77:173-184 Yi, Ping.DEVELOPMENT OF AN IMPROVED MULTI-COMPONENT VAPORIZATION MODEL FOR APPLICATION IN OXYGEN-ENRICHE...[J],NUMERICAL HEAT TRANSFER PART A APPLICATIONS,2022,66(8):904-927 Yi, Ping.Development of a quasi-dimensional vaporization model for multi-component fuels focusing on for...[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2022,97:130-145 隆武强.Effect of Spark Timing and Load on Combustion and Emission Characteristics in Jet Controlled Comp...[A],SAE 2015 International Powertrain, Fuels & Lubricants Meeting,2022 隆武强.Effects of air jet duration and timing on the combustion characteristics of high-pressure air j...[J],ENERGY CONVERSION AND MANAGEMENT,2022,127:392-403 隆武强.Effects of dual-direct injection parameters on performance of fuel Jet Controlled Compression I...[J],FUEL,2022,235:658-669 田华.Experimental Research on Controllability and Emissions of Jet-Controlled Compression Ignition E...[J],Energies,2022,12(15) Li, Bo.Experimental research on the effects of kerosene on the pre-injection spray characteristics and...[J],FUEL,2022,281 田江平.Experimental and Numerical Studies on Mixture Formation and Ignition Processes of Sprays Injected...[A],The 15th Annual Conference on Liquid Atomization and Spray Systems - Asia,2022 张强.Experimental and numerical study of jet controlled compression ignition on combustion[J],Energies,2022,7(7):4519-4531 张强.Experimental and Numerical Study of Jet Controlled Compression Ignition on Combustion Phasing C...[J],Energies,2022,7(7):4519-4531 田江平.Experimental study on jet ignition and combustion processes of natural gas[J],FUEL,2022,262:116467- 田江平.Experimental study on mixture formation and ignition processes of spray injected by hole-type noz...[A],2022 田江平.Experimental study on mixture formation and ignition processes of spray injected by hole-type noz...[J],SAE International Journal of Engines,2022,5(1):17-24 田江平.Experimental study on spray characteristics under ultra-high injection pressure for DISI engine...[J],FUEL,2022,186:365-374 田江平.Fuel Economy Analysis of Combined Engine HEVs[A],25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition Conference,2022,517-521 田江平.Fuel Spray Evaporation and Mixture Formation Processes of Ethanol/Gasoline Blend Injected by Hole...[J],SAE International Journal of Engines,2022,5(4):1836-1846 冯立岩.Increasing the application of gas engines to decrease China's GHG emissions[J],Mitigation and Adaptation Strategies for Global Change,2022,22(6):839-861 Fu, Yao.Investigation of the performance of double-layer diverging combustion chamber in a single-cylin...[J],FUEL,2022,268 孟相宇.Investigation of Effects of Air Jet Pressure and Temperature on High-Pressure Air Jet Controlle...[J],ENERGY FUELS,2022,30(1):674-683 隆武强.Investigation on the development and the controllability of a compact multi-functional, fully var...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D JOURNAL OF AU,2022,230(1) 崔靖晨.Investigation on the development and the controllability of a compact multi-functional, fully v...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D JOURNAL OF AU,2022,230(1):117-132 冯立岩.The influence of the enrichment injection angle on the performance of a pre-chamber spark ignit...[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D JOURNAL OF AU,2022,232(5):679-694 田江平.Visua lization Study on Ignition and Combustion Processes of Natural Gas Premixture Ignited by a ...[A],CIMAC Congress 2019,2022 Wei, Fuxing.Visualization study on lean combustion characteristics of the premixed methanol by the jet igniti...[J],FUEL,2022,308 冯立岩.3-D Numerical Simulation on the Working Process of a Gasoline Direct Injection Engine[A],25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition Conference,2022,1172-1176 wangyang.Analysis and optimization of a variable mode valve actuation system[J],International Journal of Engine Research,2022,1468087420905994 Wang, Yang.Analysis and optimization of a variable mode valve actuation system[J],International Journal of Engine Research,2022,22(5):1500-1511 Nishida, Keiya.An experimental and numerical study on sprays injected from two-hole nozzles for DISI engines[J],FUEL,2022,88(9):1634-1642 孟相宇.An experimental investigation of a dual-fuel engine by using bio-fuel as the additive[J],RENEWABLE ENERGY,2022,147:2238-2249 隆武强.A numerical investigation of the vaporization process of lubricating oil droplets under gas engin...[A],SAE 2015-01-1949,2022,1(1):1-15 隆武强.A Study of Combustion Phasing Control and Emissions in Jet Controlled Compression Ignition Engine...[A],SAE 2014 International Powertrain, Fuels & Lubricants Meeting,2022 冷先银.A study of the mixture formation process for a third-generation conical spray applied in HCCI d...[J],FUEL,2022,89(2):392-398 Wang, Ye.Combustion characteristics of high pressure direct-injected methanol ignited by diesel in a con...[J],FUEL,2022,254 冯立岩.Combustion Performance and Emission Characteristics of a Diesel Engine Using a Water-Emulsified...[J],Energies,2022,8(12):13628-13640 冯立岩.Combustion performance and emission characteristics of a diesel engine using water-emulsified hea...[J],Energies,2022,8(12) 冯立岩.Combustion System Optimization of a Gasoline Direct Injection Engine[J],Advanced materials research,2022,354(354):419-428 冯立岩.Combustion System Optimization of a Gasoline Direct Injection Engine[A],International Conference on Energy, Environment and Sustainable Development (ICEESD 2011),2022,354-355:419-+ 冯立岩.Decreasing NOx of a Low-Speed Two-Stroke Marine Diesel Engine by Using In-Cylinder Emission Con...[J],Energies,2022,9(4) 田江平.Mixture Formation and Ignition Processes of Fuel Sprays Injected from Hole-Type Nozzles for DISI ...[A],2010 JSAE Annual Congress(Autumn),2022 于淼.Modeling analysis of frequency lottery-buyer's behavior[A],1st International Conference on Information Science and Engineering, ICISE2009,2022,4941-4944 冯立岩.Numerical study on evaporation of lubricating oil droplets under natural gas engine conditions[A],ASME 2018 Internal Combustion Engine Division Fall Technical Conference, ICEF 2018,2022,2 隆武强.Researches of Double-Layer Diverging Combustion System (DLDCS) in a di Diesel Engine[A],JSAE/SAE 2015 International Powertrains, Fuels and Lubricants Meeting, FFL 2015,2022,2015-September Fu, Lei.Research on the Ignition-Chamber GDI Engine Combustion System[J],热科学与技术,2022,4(1):53-62 冯立岩.Research on the Characteristics of Enrichment Fuel Injection Process in the Pre-Chamber of a Mari...[A],SAE 2015 International Powertrain, Fuels & Lubricants Meeting,2022 Qi Kun-peng.Simulation of quasi-dimensional model for diesel engine working process[J],Journal of Central South University of Technology English Edition,2022,17(4):868-872 孟相宇.Study of high-pressure air jet controlled compression ignition with compound thermodynamic cycle ...[J],International Journal of Engine Research,2022,1468087420969337 孟相宇.Study of jet pressure and timing on emission formation for high-pressure air jet controlled premi...[J],FUEL,2022,283(119323) 隆武强.Development of an improved hybrid multi-component vaporization model for realistic[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2014,77(5):173-184 孟相宇.Experimental study of using additive in the pilot fuel on the performance and emission trade-of...[J],APPLIED THERMAL ENGINEERING,2019,157 田江平.交叉孔喷嘴喷雾与燃烧宏观特性研究[A],中国内燃机学会第九届学术年会论文集中国内燃机学会,2016,389-393 冯立岩.低速二冲程发动机气缸润滑油蒸发特性[J],哈尔滨工程大学学报,2018,39(2):332-337 崔靖晨.6缸内燃机用集约型多功能连续可变气门驱动系统的可控性研究[A],中国内燃机学会第六届青年学术年会,2015,422-430 隆武强.4缸内燃机用集约型多功能连续可变气门驱动系统的可控性研究[A],中国内燃机学会燃烧节能净化分会2015年学术年会,2015

推荐链接
down
wechat
bug