陈超 - 中南大学 - 粉末冶金研究院

个人简介

教育经历 2009/09-2014/01 清华大学材料学院，博士，导师：潘峰 2005/09-2009/06 中南大学材料科学与工程学院, 学士工作经历 2018/09-至今中南大学粉末冶金研究院，副教授 2016/03-2018/08 中南大学粉末冶金研究院，研究员 2015/07-2017/07 中南大学粉末冶金研究院，博士后，导师：周科朝

研究领域

增材制造（3D打印）、有色金属微结构调控与表征

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1]Ni M, Liu S, Chen C*, Li R, Zhang X, Zhou K. Effect of heat treatment on the microstructural evolution of a precipitation-hardened superalloy produced by selective laser melting. Mater. Sci. Eng. A, 2019, 748:275-285. [2]Chen W, Li C, Zhang X, Chen C*, Lin Y C, Zhou K. Deformation-induced variations in microstructure evolution and mechanical properties of bi-modal Ti-55511 titanium alloy. J. Alloys Compd., 2019, 783:709-717. [3]Tang L, Chen C*, Wei A, Li K, Zhang D, Zhou K. Regulating crystal structure and ferroelectricity in Sr doped HfO2 thin films fabricated by metallo-organic decomposition. Ceram. Int., 2019, 45:3140-3147. [4]Chen W, Chen C*, Zi X H, Cheng X F, Zhang X Y, Lin Y C, Zhou K C. Controlling the microstructure and mechanical properties of a metastable beta titanium alloy by selective laser melting. Mater. Sci. Eng. A, 2018, 726:240-250. [5]Zi X, Chen C*, Wang X, Wang P, Zhang X, Zhou K. Spheroidisation of tungsten powder by radio frequency plasma for selective laser melting. Mater. Sci. Technol., 2018, 34:735-742. [6]Zhang G, Chen C*, Wang X, Wang P, Zhang X, Gan X, Zhou K. Additive manufacturing of fine-structured copper alloy by selective laser melting of pre-alloyed Cu-15Ni-8Sn powder. Int. J. Adv. Manuf. Technol., 2018, 96:4223-4230. [7]Wei A, Chen C*, Tang L, Zhou K, Zhang D. Chemical solution deposition of ferroelectric Sr:HfO2 film from inorganic salt precursors. J. Alloys Compd., 2018, 731:546-553. [8]Peng T, Kellens K, Tang R, Chen C, Chen G. Sustainability of additive manufacturing: An overview on its energy demand and environmental impact. Additive Manufacturing, 2018, 21:694-704. [9]Ni M, Chen C*, Wang X, Wang P, Li R, Zhang X, Zhou K. Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing. Mater. Sci. Eng.: A, 2017, 701:344-351. [10] Chen C, Zhang Y, Zeng J, Zhang F, Zhou K, Bowen C R, Zhang D. Aligned macroporous TiO2/chitosan/reduced graphene oxide (rGO) composites for photocatalytic applications. Appl. Surf. Sci., 2017, 424:170-176. [11] Chen C, Wei A, Li Y, Zhou K, Zhang D. Improved tunable properties of Co doped Ba0.8Sr0.2TiO3 thin films prepared by sol-gel method. J. Alloys Compd., 2017, 692:204-211. [12] Luo H, Zhang D, Wang L, Chen C*, Zhou J, Zhou K. Highly enhanced dielectric strength and energy storage density in hydantoin@BaTiO3-P(VDF-HFP) composites with a sandwich-structure. RSC Adv., 2015, 5:52809-52816. [13] Luo H, Zhang D, Jiang C, Yuan X, Chen C*, Zhou K. Improved dielectric properties and energy storage density of poly(vinylidene fluoride-co-hexafluoropropylene) nanocomposite with hydantoin epoxy resin coated BaTiO3. ACS Appl. Mater. Interfaces, 2015, 7:8061-8069. [14] Chen C, Zhuang H, Zhu X, Zhou K, Zhang D. Enhancement of relaxor properties by Nb doping in Ba0.8Sr0.12Ca0.08TiO3 lead-free ferroelectric ceramics. Ceram. Int., 2015, 41:9893-9898. [15] Chen C, Zhuang H, Zhu X, Zhang D, Zhou K, Yan H. Effect of Ca substitution sites on dielectric properties and relaxor behavior of Ca doped barium strontium titanate ceramics. J. Mater. Sci.-Mater. Electron., 2015, 26:2486-2492. [16] Wang Y, Zhou X, Song C, Yan Y, Zhou S, Wang G, Chen C, Zeng F, Pan F. Electrical control of the exchange spring in antiferromagnetic metals. Adv. Mater., 2015, 27:3196-3201. [17] Pan F, Gao S, Chen C, Song C, Zeng F. Recent progress in resistive random access memories: materials, switching mechanisms, and performance. Mater. Sci. Eng. R-Rep., 2014, 83:1-59. [18] Han J, Song C, Gao S, Wang Y, Chen C, Pan F. Realization of the meminductor. ACS Nano, 2014, 8:10043-10047. [19] Chen C, Gao S, Zeng F, Wang G, Li S, Song C, Pan F. Conductance quantization in oxygen-anion-migration-based resistive switching memory devices. Appl. Phys. Lett., 2013, 103:043510. [20] Chen C, Gao S, Tang G, Fu H, Wang G, Song C, Zeng F, Pan F. Effect of electrode materials on AlN-based bipolar and complementary resistive switching. ACS Appl. Mater. Interfaces, 2013, 5:1793-1799.