余同希 - 南方科技大学 - 力学与航空航天工程系

个人简介

工作经历 1968/9 – 1970/3，广东台山部队农场劳动锻炼 1970/4 – 1977/12，四川泸州长江挖掘机厂技术员 1978/1 – 1979/12，天津工程机械研究所工程师 1980/1 – 1981/12，英国剑桥大学工程系访问学者 1983/8 – 1983/11，英国剑桥大学工程系 Research Associate 1983/12 – 1984/3，美国布朗大学工程系 Research Associate 1984/3 – 1991/12，北京大学力学系教授、博导、固体力学教研室主任其中 1988 及1991 各有8个月在英国剑桥大学工程系作访问学者 1992/1 – 1995/3，英国曼彻斯特理工大学(UMIST) 机械工程系教授(Reader) 1995/4 – 2010/6，香港科技大学机械工程系教授、讲座教授 2011/1 – 2011/5，2012/1– 2012/5，新加坡南洋理工大学机械工程学院访问教授 2012/6 – 现在，香港科技大学校长或副校长（研究）的资深顾问(Part time) 学习经历 1958-1964, 北京大学数学力学系本科 1964-1968, 北京大学数学力学系研究生 1981-1983, 英国剑桥大学工程系博士

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Xueyu Bai, Ling Zhu and T.X. Yu, Saturated impulse for fully clamped square plates under blast loading, Int. J. Mech. Sci. 146-147, 417-431, 2018. Y. Wang, Y.L. Yang, S. Wang, Z.L. Huang and T.X. Yu, Dynamic behavior of circular ring impinging on ideal elastic wall: Analytical model and experimental validation, Int. J. Impact Engng. 122, 148-160, 2018. YuZhe Liu, XinMing Qiu and T.X. Yu A theoretical model of the inversion tube over a conical die, Thin-Walled Structures, 127, 31-39, 2018. YuZhe Liu, XinMing Qiu, HongLei Ma, WenWen Fu and T.X. Yu, A study of woodpecker's pecking process and the impact response of its brain, Int. J. Impact Engng. 108, 263-271, 2017. Dora Karagiozova, T.X. Yu, Shiyun Shi, Ling Zhu, On the influence of elasticity on the large deflections response of circular plates to uniform quasi-static pressure, Int. J. Mech. Sci. 131-132, 894-907, 2017. Pengfei Wang, Xin Zhang, Reinack Varghese Hansen, Gengzhi Sun, He Zhang, Lianxi Zheng, T.X. Yu, Guoxing Lu, and Jinglei Yang, Strengthening and failure mechanisms of individual carbon nanotube fibers under dynamic tensile loading, Carbon, 102, 18-31, 2016. X.H. Yu, X.M. Qiu and T.X. Yu, Theoretical model of a metal tube under inversion over circular dies, Int. J. Mech. Sci. 108-109, 23–28, 2016. L.L. Hu, Zh.H. Zeng and T.X. Yu, Axial crushing of pressurized thin-walled cylindrical tubes -- analysis and simulations, Int. J. Mech. Sci. 107, 126–135, 2016. Yanfei Xiang, T.X. Yu and Liming Yang, Comparative analysis of energy absorption capacity of polygonal tubes, multi-cell tubes and honeycombs by utilizing Key Performance Indicators, Materials & Design, 89, 689-696, 2016. H.H. Ruan and T.X. Yu, The unexpectedly small coefficient of restitution of a two-degree-of-freedom mass-spring system and its implications, Int. J. Impact Engng. 88, 1-11, 2016. S. Xu, D. Ruan, G. Lu and T.X. Yu, Collision and rebounding of circular rings on rigid target, Int. J. Impact Engng. 79, 14-21, 2015. R.H. Bao and T.X. Yu, Collision and rebound of ping pong balls on a rigid target, Materials & Design, 87, 278-286, 2015. R.H. Bao and T.X. Yu, Impact of an elastic-plastic ring on a rigid wall, Int. J. Mech. Sci. 91, 55-63, 2015. D. Karagiozova, T.X. Yu, G. Lu and X. Xiang, Response of a circular metallic hollow beam to an impulsive loading, Thin-Walled Structures, 80, 80-90, 2014. M. Xu, Y. Wang, X.L. Jin, Z.L. Huang and T. X. Yu, Incorporating dissipated impact into random vibration analyses through the modified Hertzian contact model, ASCE Journal of Engineering Mechanics, 139(12), 1736-1743, 2013. L.L. Hu and T.X. Yu, Mechanical behavior of hexagonal honeycombs under low-velocity crushing – theory and simulations, Int. J. Solids Struct. 50, 3152-3165, 2013. D. Karagiozova, T.X. Yu and G. Lu, Transverse blast loading of hollow beams with square cross sections, Thin-Walled Structures, 62, 169–178, 2013. C.J. Shen, T.X. Yu and G. Lu, Double shock mode in graded cellular rod under impact, Int. J. Solids Struct. 50, 217–233, 2013. Fenghua Zhou, T.X. Yu and Liming Yang, Elastic behavior of ring-on-foundation, Int. J. Mech. Sci. 54(1), 38-47, 2012. Q.M. Qiu and T.X. Yu, Some topics in recent advances and applications of structural impact dynamics, Applied Mechanics Review, 64(3), 034001, DOI: 10.1115/1.4005571, May 2011. Xinghua Zhang, Ping Feng, Yongjun He, T.X. Yu, Qingping Sun, Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips, Int. J. Mech. Sci., 52(12), 1660-1670, 2010. L.L. Hu and T.X. Yu, Dynamic crushing strength of hexagonal honeycombs, Int. J. Impact Engng. 37(5), 467-474, 2010. P. Xue, C.F. Qiao and T.X. Yu, Crashworthiness study of a keel beam structure, Int. J. Mech. Sci. 52(5), 672-692, 2010. C.Y. Zhou and T.X. Yu, Analytical models for shock isolation of typical components in portable electronics, Int. J. Impact Engng, 36(12), 1377-1384, 2009. X.M. Qiu, J. Zhang and T.X. Yu, Collapse strength of periodic planar lattices under uniaxial compression, Part I: Quasi-static strength predicted by limit analysis, Int. J. Impact Engng, 36(10-11), 1223-1230, 2009. X.W. Zhang, H. Su and T.X. Yu, Energy absorption of an axially crushed square tube with a buckling initiator, Int. J. Impact Engng. 36(3), 402-417, 2009. X.W. Zhang and T.X. Yu, Energy absorption of pressurized thin-walled circular tubes under axial crushing, Int. J. Mech. Sci., 51(5), 335-349, 2009. L.L. Hu, T.X. Yu, Z.Y. Gao and X.Q. Huang, The inhomogeneous deformation of polycarbonate circular honeycombs under in-plane compression, Int. J. Mech. Sci. 50(7), 1224-1236, 2008. Z.Y. Gao, T.X. Yu and H. Zhao, Mechanical behavior of metallic hollow sphere (MHS) materials: An experimental study, ASCE J. Aerospace Eng. 21(4), 206-216, 2008. J. Cao, R. Akkerman, P. Boisse, J. Chen, H.S. Cheng, E.F. de Graaf, J.L. Gorczyca, P. Harrison, G. Hivet, J. Launay, W. Lee, L. Liu, S.V. Lomov, A. Long, E. de Luycker, F. Morestin, J. Padvoiskis, X.Q. Peng, J. Sherwood, Tz. Stoilova, X.M. Tao, I. Verpoest, A. Willems, J. Wiggers, T.X. Yu and B. Zhu, Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results, Composites Part A – Applied Science and Manufacturing, 39(6), 1037-1053, 2008. C.Y. Zhou, T.X. Yu and R.S.W. Lee, Drop/impact tests and analysis of typical portable electronic devices, Int. J. Mech. Sci. 50(5), 905-917, 2008. D. Karagiozova, T.X. Yu and Z.Y. Gao, Stress-strain relationship for metal hollow sphere materials as a function of their relative density, ASME J. Appl. Mech., 74(5), 898-907, 2007. B. Zhu, T.X. Yu and X.M. Tao, Large deformation and slippage mechanism of plain woven composite in bias extension, Composites Part A – Applied Science and Manufacturing, 38(8), 1821-1828, 2007. B. Zhu, T.X. Yu and X.M. Tao, An experimental study of in-plane large shear deformation of woven fabric composite, Composite Science and Technology, 67(2), 252-261, 2006. S.L. Ruan, P. Gao and T.X. Yu, Ultra-strong gel-spun UHMMPE fibers reinforced using multiwalled carbon nanotubes, Polymer, 47(5), 1604-1611, 2006. D. Karagiozova, T.X. Yu and Z.Y. Gao, Modeling of MHS cellular solid in large strains, Int. J. Mech. Sci. 48(11), 1273-1286, 2006.