个人简介
2014.02-至今 深圳艾利门特科技有限公司，董事长
2013.01-至今 南方科技大学，材料科学与工程系，副教授
2006.10-2012.12 昆士兰大学（澳大利亚），机械与冶金学院，高级研究员
2004.10-2006.08 达姆施塔特工业大学（德国），地质与材料系，洪堡学者
2004.01-2004.09 香港城市大学，物理与材料系，高级副研究员
2000.12-2003.11 香港中文大学，物理系，博士
1997.09-2000.07 清华大学，机械工程系，硕士
1992.09-1997.07 清华大学，机械工程系，本科
研究领域
粉末冶金及粉末注射成型对钛合金、铝合金、不锈钢、高熵合金、非晶等金属材料进行加工，并对其力学性能、磁性能等进行研究
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
The Technological Design of Geometrically Complex Ti-6Al-4V Parts by Metal Injection Molding 2019 Shulong Ye, Wei Mo, Yonghu Lv, Zhanhua Wang, Chi Tat Kwok and Peng Yu,* Applied Sciences
Effects of Fe3P Addition on Sintering Behaviors and Magnetic Properties of Fe-P Alloys Sintered at Low Temperatures 2019 Rui Ma, Kaiping Yu, Litao Liu, Heng Jiang , Shulong Ye and Peng Yu* Metals 2019, 9(3) 321
Influences of sintering parameters on shape-retention ability of porous Ni3Al intermetallic fabricated by powder metallurgy 2019 Heng Jiang, Shulong Ye, Rui Ma, Peng Yu∗ Intermetallics 105 (2019) 48–55
On the Microstructures and Fatigue Behaviors of 316L Stainless Steel Metal Injection Molded with Gas- and Water-Atomized Powders 2018 Yongyun Zhang, Ensheng Feng, Wei Mo, Yonghu Lv, Rui Ma, Shulong Ye, Xiaogang Wang and Peng Yu,* Metals 2018, 8(11)，893
Fabrication of biomedical Ti-24Nb-4Zr-8Sn alloy with high strength and low elastic modulus by powder metallurgy 2018 Xia Li, Shulong Ye, Xini Yuan, Peng Yu, * Journal of Alloys and Compounds 772 (2019) 968-977
Microstructural development of electron beam processed Al-3Ti-1Sc alloy under different electron beam scanning speeds 2017 P. Yu*, M. Yan, D. Tomus, C.A. Brice, C.J. Bettles, B. Muddle, M. Qian** Materials Characterization 143 (2018) 43–49
Novel dealloying structures and ageing behaviors of Cu-Zr metallic glass ribbons 2017 Shuang Zhang, Shulong Ye, Peng Yu* Journal of Non-Crystalline Solids 458 (2017) 61–64
Substitution effect on glass formation of NixCo60−xNb40 alloys 2016 Shulong Ye, Shuang Zhang, Jürgen Eckert, Peng Yu* Materials Letters 185 (2016) 541–544
The role of alloying elements on the sintering of Cu 2016 Huali Hao, Shulong Ye, Kaiping Yu, Peng Chen, Ruinan Gu, Peng Yu* Journal of Alloys and Compounds 684 (2016) 91-97
Effects of cold compacting pressure on the expansion behavior of Ti-48Al during sintering 2016 Shulong Ye , Huali Hao , Wei Mo, Kaiping Yu, Litao Liu, Chengji Deng, Peng Yu* , Journal of Alloys and Compounds 673 (2016) 399-404
The effect of trace amount of Ti and W on the powder metallurgy process of Cu 2016 Huali Hao, Wei Mo, Yonghu Lv, Shulong Ye, Ruinan Gu, Peng Yu*. Journal of Alloys and Compounds 660 (2016) 204-207
Cobalt-doped Ti–48Al–2Cr–2Nb alloy fabricated by cold compaction and pressureless sintering 2013 Y. Xia , P. Yu , G.B. Schaffer , M. Qian. Materials Science & Engineering A 574 (2013) 176–185
A correlation between failure angle and constituent for Al-AlN composites under uniaxial tensile conditions 2012 Peng Yu, Ma Qian, G. B. Schaffer. Metallurgical and Materials Transaction A, (2012), vol. 43A, p. 3239-3299
Fabrication of porous aluminium with controllable pore fractioin 2011 Peng Yu, Ming Yan, G. B. Schaffer. ActaMaterialia, (2011) vol 42, p. 2040-2047
Pressureless Infiltration and Resulting Mechanical Properties of Al-AlN Preforms Fabricated by Selective Laser Sintering and Partial Nitridation 2010 Peng Yu, Ma Qian, G. B. Schaffer. Metallurgical and Materials Transaction A, (2010) vol 41A, p. 2417-2424（SCI源刊）
On the infiltration mode during fabrication of aluminium composite. 2010 Peng Yu, Ma Qian, Ling Li, G. B. Schaffer. ActaMatererialia, (2010) vol. 58, p. 3790-3797
Secondary phases and interfaces in a nitrogen-atmosphere sintered Al alloy 2010 M.Yan, Peng Yu, G. B. Schaffer, Ma Qian.
TEM evidence for the formation of AlN during liquid phase sintering. Metallurgical and Materials Transaction A, (2010) vol. 58, p. 5667-5674
Microstructural evolution during pressureless infiltration of aluminum alloy parts fabricated by selective laser sintering. 2009 Peng Yu, G. B. Schaffer. ActaMatererialia, (2009) vol 57, p. 163-170
京公网安备 11010802027423号