个人简介
科研成果：
科研项目（共主持55科研项目, 含以下在研）：
1、Single-Grit Magnetobrasion for Free Form Micro-Machining, GT Fund for Innovation in Research and Education, GT-FIRE, 3/12-6/14.
2、Predictive Modeling for First-Part-Right Grind Shaping of Honeycomb Substrates, Corning Corp., 9/2012-8/2014.
3、Manufacturing-Influenced Computational Materials Design, Boeing Strategic University Program (SUP), 12/2012-12/2014.
4、Intelligent Learning Engines for Manufacturing, SEC Academic Sinica (SEAS), 7/2013-12/2013.
5、Intelligent Manufacturing Systems, SEC Academic Sinica (SEAS), 1/2014-6/2016.
6、Making Ultra-Fine Grained Pure Titanium-Based Medical Implant by Seamless Integrating Severe Plastic Deformation and Machining, US National Science Foundation, 4/2014 – 3/2017.
7、Investigation of Alternative Manufacturing Processes for the Production of Slot-Type Features in Difficult-to-Machine Materials, ALCOA, 3/2014 – 3/2016.
获奖情况：
1、美国道格拉斯工程奖章 (Douglas Outstanding Young Manufacturing Engineer Award, SME);
2、国际迪德工程奖章 (Ralph R. Teetor Educational Award, SAE International);
3、伍卓夫学术专家奖 (Woodruff Faculty Fellow, Georgia Institute of Technology, USA)
4、美国机械工程师学会院士 (Fellow, American Society of Mechanical Engineers);
5、美国布列尔量测技术奖章 (ASME Blackall Machine Tool and Gage Award);
6、国际製造工程师学会院士 (Fellow, American Society of Manufacturing Engineers);
7、最佳论文发表奖,国际机电系统会议 (Best Paper Award, International Forum on System and Mechatronics);
主讲课程：
1、机床设计与控制(Machine Tool Design and Control), (研)
2、设计,材料,与製造(Design, Materials, and Manufacture), (本)
3、製造工程与技术(Manufacturing Engineering), (本)
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
学术论文（共300余篇论文及20餘场国际会议主题讲演、含近一年发表）：
1、Su, J.-C., Young, K. A., Ma, K., Srivasta, S., Morehouse, J. B., and Liang, S. Y., “Modeling of Residual Stresses in Milling,” International Journal of Advanced Manufacturing Technology, Vol. 65, Issue 5, 2013, pp. 717-733.
2、Su, J.-C., Young, K. A., Ma, K., Srivatsa, S., Morehouse, J. B., and Liang, S. Y., “Predictive Modeling of Machining Residual Stresses Considering Tool Edge Effects,” Production Engineering Research and Development, : Volume 7, Issue 4, 2013, pp. 391-400.
3、Venkatachalam, S., Li, X., Fergani, O., Yang, J. G., and Liang, S. Y., “Crystallographic Effects on Micro-scale Machining of Polycrystalline Brittle Materials,” ASME Trans. Journal of Micro and Nano-Manufacturing, Vol. 1, No. 4, 2013, pp. 041001-1~04100-9.
4、Hwang, J., Jeong, E.-H., Chung, E.-S., and Liang, S. Y., “Assessment of the Cutting Tooling Effect on Turning Chatter,” Proceedings of International Conference on Mechatronics and Control Engineering (ICMCE), Dalian, China, 2013.
5、Ji, X., Zhang, X. P., Li, B. Z., and Liang, S. Y., “Predictive Modeling of Cutting Force, Temperature, and Residual Stress in Minimum Quantity Lubrication,” Proceedings of 2nd International Conference on Machine Design and Manufacturing Engineering（ICMDME), Jeju Island, S. Korea, May 1~2, 2013.
6、Pucha, R., Utschig T., and Liang, S. Y., “Use of Process-oriented Approaches in Content-Intensive Courses: Some Insight in Teaching / Learning of Machine Design” Proceedings of 120th ASEE Annual Conference & Exposition, Atlanta, Paper ID # 6259, June 23-26, 2013.
7、Hwang, J., Jeong, E.-H., Chung, E.-S., and Liang, S. Y., “Assessment of the Cutting Tooling Effect on Turning Chatter,” Applied Mechanics and Materials, Vol. 433-435, 2013, pp. 2101-2106.
8、Ji, X., Zhang, X. P., and Liang, S. Y., “Effects of Cutting Fluid on Force, Temperature and Residual Stress,” Proceedings of International Forum on System and Mechatronics, Gui-lin, China, July 22~25, 2013.
9、Ji, X., Zhang, X. P., Li, B. Z., and Liang, S. Y., “Predictive Modeling of Minimum Quantity Lubrication: Cutting Force, Temperature and Residual Stress,” Applied Mechanics and Materials, Vol. 365-366, 2013, pp 1181-1184.
10、Li, B., Ni, J., Yang, J., and Liang, S. Y., “Study on High-speed Grinding Mechanisms for Quality and Process Efficiency,” International Journal of Advanced Manufacturing Technology, 2013, DOI 10.1007/s00170-013-5297-y.
11、Fergani, O., Mamedov, A., Lazoglu, I., Yang, J., and Liang, S. Y., “Prediction of Residual Stress Induced Distortions in Micro-milling of Al7050 Thin Plate”, Proceedings of International Conference on Management, Manufacturing and Materials Engineering (ICMMM), Xi’an, China, October 25-27, 2013.
12、Omar Fergani and Steven Y. Liang, “Materials–Affected Manufacturing, Manufacturing Letters, Vol. 1, 2–4, 2013, pp. 74–77.
13、Shih, A. H., and Liang, S. Y., “Magnetic Levitation and Rotation for Feasibility of Free-form Machining,” Proceedings of 2013 The 4th International Conference on Frontiers of Manufacturing and Design Science (ICFMD), Hong Kong, Dec 11-13, 2013.
14、Shao, Y., Fergani, O., Venkatachalam, S., and Liang, S. Y., “Predictive Materials-Influenced Force Model in the Ductile-Regime Machining of Polycrystalline Brittle Materials,“ International Journal of Recent Advances in Mechanical Engineering (IJMECH), Vol. 2, No. 4, November 2013, pp. 1-7.
15、Ji, X., Zhang, X., and Liang, S. Y., “Predictive Modeling of Residual Stress in Minimum Quantity Lubrication Machining, International Journal of Advanced Manufacturing Technology, 2013, DOI 10.1007/s00170-013-5439-2.
16、Shih, A. H., and Liang, S. Y., “Magnetic Levitation and Rotation for Feasibility of Free-form Machining,” Applied Mechanics and Materials, Vols. 496-500, pp 1048-1051, Trans Tech Publications, Switzerland, 2014.
17、Liang, S. Y., Li, Y., Billington, S. A., Zhang, C., Shiroishi, J., Kurfess, T. R., and Danyluk, S., “Adaptive Prognostics for Rotary Machineries,” Proceedings of International Conference on Structural Integrity, Kalpakkam, India, February 4-7, 2014.
18、Fergani, O., Mamedov, A., Lazoglu, I., Yang, J., and Liang, S. Y., “Prediction of Residual Stress Induced Distortions in Micro-milling of Al7050 Thin Plate”, Applied Mechanics and Materials, Vol. 472, 2014, pp 677-681.
19、Fergani O., Shao Y., Lazoglu I., Tabei, A., Liang S. Y., “Temperature Effect on Grinding Residual Stresses,” 6th CIRP Conference on High Performance Cutting, Berkeley, June 23-25, 2014 (accepted)
20、Fergani, O, Shao Y, Liang S Y, Effect of Temperature on the Subsurface Microstructure and Mechanical Properties of AA 7075-T6 during Orthogonal Cutting, 2nd CIRP Conference on Surface Integrity (CSI), Notthingham, UK, 28-30 May 2014 (accepted)
21、Wu, Zhouping, Li, Beizhi, Yang, Jianguo, and Liang, S. Y., “Effect of Grinding Wheel on the Dynamic Performance of High-Speed Spindle System with an Improved FE Model,” Journal of Vibroengineering, 2014 (accepted).
京公网安备 11010802027423号