个人简介
教育经历
2006.9-2010.6 东北大学理学院材料物理专业学士学位
2010.9-2012.6 东北大学理学院材料物理与化学专业硕士学位
2012.9-2016.5 东北大学 信息科学与工程学院 检测技术与自动化装置专业 博士学位
工作经历
2016.8-2019.3东北大学信息科学与工程学院师资博士后
2019.3-2020.12 东北大学 信息科学与工程学院 讲师
2021.1至今 东北大学信息科学与工程学院副教授
研究领域
1.机器视觉与人工智能。非显著特征条件下的高精度识别方法、技术及应用,侧重基于视觉的物料分选、异物检测等工业应用中的低色差、小尺寸等问题。
2.光电测量仪表及装置。微弱光电信号的高精度检测硬件,单片机及FPGA等嵌入式技术与系统。
3.红外辐射温度测量理论、方法与技术。炼钢、连铸及轧钢过程中的难测温度检测
近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
1. Zhang Jiu*, Lan Xu, You Baihui, et al. Mechanism of Thermal Shock Damage of Mo-W-ZrO2 Cermet Sensor for Molten Steel Temperature Caused by Water Vapor During Sintering [J], Ceramics International, 2023, 49(11), 16842-16848. (SCI Q1)
2. Zhang Jiu*, Xie Qixian, Mei Guohui, et al. Formation Mechanism of Sintering Crackin Mo–W–ZrO2 Sensor for Molten Steel Temperature Caused by Water Vapor[J]. ISIJ International, 2022, 62(4): 626-631. (SCIQ3)
3. Xie Qixian, Zhang Jiu*, Mao Zhingzhong. A New Method for Sensing Pouring Temperature of Molten Steel in Tundish [J]. IEEE Transactions on Instrumentation and Measurement, 2021, 70: 7502307. (SCIQ1)
4. Zhang Jiu*, Mei Guohui, Xie Zhi, et al. An anti-oxidation coating for W-Mo and ZrO2 composite in a wide range from room temperature to 1200oC [J]. International Journal of Refractory Metals and Hard Materials, 2019, 82(8):136-140. (SCI Q1)
5.Zhang Jiu*, Mei Guohui, Xie Zhi, et al, Corrosion Mechanism of Mo-W-ZrO2 Cermet in Molten Steel[J]. Ceramics International, 2018, 44(7): 8605-8611. (SCI Q1)
6. Zhang Jiu*, Mei Guohui, Xie Zhi, et al. Firing Mechanism of Oxide-Carbon Refractories with Phenolic Resin Binder [J]. Ceramics International, 2018, 44(5): 5594-5600.(SCIQ1)
7. Zhang Jiu*, Mei Guohui, Xie Zhi, et al. A Fast Response Sensor for Continuously Measuring Molten Steel Temperature[J]. ISIJ International, 2018, 58(8): 1453-1458. (SCIQ2)
8. Zhang Jiu, Mei Guohui*, Xie Zhi, et al. Curing Mechanism of Phenolic Resin Binder for Oxide-Carbon Refractories [J]. ISIJ International, 2016, 56(1): 44-49. (SCIQ2)
9. Zhang Jiu*, Mei Guohui, Zhao Shumao, et al. A Fused Glass Coating for Oxidation Protection of Mo-W-ZrO2 Cermet [J]. Surface and Coating Technology, 2015, 261(1): 189-194. (SCIQ1)
10. Zhang Jiu*, Mei Guohui, Zhao Shumao, et al. Effect of Firing Temperature on Mechanical Properties of Al2O3-C Sensor for Continuous Measurement of Molten Steel Temperature [J]. ISIJ International, 2014, 54(3): 553-558. (SCIQ2)