个人简介
夏焕雄，男，1987年生，工学博士，北京理工大学长聘副教授、特别研究员、博士生导师。2010年获北京工业大学机械工程及自动化专业工学学士，2015年获清华大学机械工程专业工学博士，先后在美国圣母大学航空与机械工程系（2016-2017）与约翰霍普金斯大学机械工程系（2017-2018）从事博士后研究工作，之后加入北京理工大学，现任北京理工大学机车与车辆学院数字化制造研究所所长。担任中国图学学会智能工厂专委会委员、北京粘接学会理事，获第六届上银优秀机械博士论文佳作奖、中国数字仿真论坛青年科技奖，入选2022-2024年度北京市科协青年人才托举工程。主要从事高性能装配与多场耦合建模仿真等方向的研究。主持了国家自然科学基金、北京市自然科学基金、国家重点研发计划项目课题、173领域基金项目、以及多项国防基础科研项目课题等。发表SCI/EI论文50余篇，其中以第一/通讯作者发表SCI论文20余篇，授权发明专利10余项，担任ADDIT. MANUF. (AM), RAPID PROTOTYPING J. (RPJ), SURF. COAT. TECH. (SCT), PHYS. FLUIDS (POF), INT. J. HEAT MASS TRAN. (IJHMT)等十余种国际期刊审稿人。主讲本科生课程《数字化设计与制造》、研究生课程《数字化制造中的建模与仿真技术》。
教育及工作经历
2022.07–至今，北京理工大学， 机械与车辆学院， 长聘副教授、特别研究员
2018.06–2022.07，北京理工大学， 机械与车辆学院， 预聘助理教授、特别副研究员
2017.08–2018.06，约翰霍普金斯大学，机械工程， 博士后，合作导师：Gretar Tryggvason
2016.01–2017.08，圣母大学（美国）， 航空与机械工程， 博士后，合作导师：Gretar Tryggvason
2010.09–2015.07，清华大学， 机械工程， 工学博士， 导师：汪劲松、向东
2006.09–2010.07，北京工业大学， 机械工程及自动化，工学学士
学术荣誉
入选2022-2024年度北京市科协青年人才托举工程，2021
中国数字仿真论坛青年科技奖，2020
第六届『上银优秀机械博士论文』佳作奖，2016
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
H Xia, Z Zhang, J Liu, X Ao*, S Lin, Y Yang. Modeling and numerical study of particle-bubble-liquid flows using a front-tracking and discrete-element method[J]. Applied Mathematical Modelling, 2023, 114:525-543.
H Yang, S Wang, H Xia*, J Liu, A Wang, Y Yang. A prediction-correction method for fast and accurate initial displacement field estimation in digital image correlation[J]. Measurement Science and Technology, 2022, 33: 105201.
H Xia, J Meng, J Liu, X Ao*, S Lin, Y Yang. Evaluation of the equivalent mechanical properties of lattice structures based on the finite element method[J]. Materials, 2022, 15(9): 2993.
X Ao, J Liu, H Xia*, Y Yang. A numerical study on the mesoscopic characteristics of Ti-6Al-4V by selective laser melting[J]. Materials, 2022, 15(8): 2850.
L Guo, J Liu, H Xia*, X Li, X Zhang, H Yang, Y Yang. Effects of loading rate, temperature, and thickness on the tensile strength of precision adhesive joints[J]. Polymer Testing, 2022, 109: 107528.
L Guo, J Liu, H Xia*, X Li, X Zhang, H Yang. Effect of surface morphology characteristic parameters on the shear strength of aluminum bonded joints[J]. International Journal of Solids and Structures, 2022, 238: 111420.
S Lin, J Liu, H Xia*, Z Zhang, X Ao. A numerical study of particle-laden flow around an obstacle: flow evolution and Stokes number effects[J]. Applied Mathematical Modelling, 2022, 103: 287-307.
S Lin, J Cai, H Xia*, X Ao, J Liu. A reduced-order model based on finite element method for fast prediction of thermal performance of lattice structures[J]. International Communications in Heat and Mass Transfer, 2021, 126: 105347.
JH Liu, XY Li, HX Xia*, L Guo. Effects of assembly errors and bonding defects on the centroid drift of a precision sleeve structure[J]. Advances in Manufacturing, 2021, 9: 509-519.
L Guo, J Liu, H Xia*, X Zhang, H Yang. Effects of surface treatment and adhesive thickness on the shear strength of precision bonded joints[J]. Polymer Testing, 2021, 94: 107063.
X Ao, H Xia*, J Liu, Q He, S Lin. A numerical study of irregular eutectic in Al-Si alloys under a large undercooling[J]. Computational Materials Science, 2021, 186: 110049.
Q He, H Xia*, J Liu, X Ao, S Lin. Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer[J]. Materials & Design, 2020, 196: 109115.
X Ao, H Xia*, J Liu, Q He. Simulations of microstructure coupling with moving molten pool by selective laser melting using a cellular automaton[J]. Materials & Design, 2020, 185: 108230.
H Xia, J Lu, G Tryggvason*. Simulations of fused filament fabrication using a front tracking method[J]. International Journal of Heat and Mass Transfer, 2019, 138: 1310-1319.
D Xiang, H Xia*, W Yang, P Mou. Parametric study and residual gas analysis of large-area silicon-nitride thin-film deposition by plasma-enhanced chemical vapor deposition[J]. Vacuum, 2019, 165: 172-178.
H Xia, J Lu, G Tryggvason*. A numerical study of the effect of viscoelastic stresses in fused filament fabrication. Computer Methods in Applied Mechanics and Engineering, 2019, 346(4), 242-259.
H Xia, J Lu, G Tryggvason*. Fully resolved numerical simulations of fused deposition modeling. Part II–solidification, residual stresses and modeling of the nozzle. Rapid Prototyping Journal, 2018, 24(6): 973-987.
H Xia, J Lu, S Dabiri, G Tryggvason*. Fully resolved numerical simulations of fused deposition modeling. Part I: fluid flow. Rapid Prototyping Journal, 2018, 24(2): 463-476.
H Xia, D Xiang*, P Mou, W Yang. Experimental study of the effects of showerhead configuration on large-area silicon-nitride thin film by plasma-enhanced chemical vapor deposition. Thin Solid Films, 2017, 638: 1-8.
D Xiang, H Xia*, W Yang, P Mou. New simulation-based approach for the profile control in a process chamber: Fluid, thermal, and plasma profile[J]. Proceedings of the Institution of Mechanical Engineers, Part E- Journal of Process Mechanical Engineering, 2017, 231(3): 565-580.
H Xia, D Xiang*, W Yang, P Mou. Multi-model simulation of 300 mm silicon-nitride thin-film deposition by PECVD and experimental verification[J]. Surface and Coatings Technology, 2016, 297: 1-10.
H Xia*, D Xiang, P Mou. The array-control heater and non-uniform resistance module design for regulating the temperature profile in a reactor chamber[J]. Journal of Mechanical Science and Technology, 2015, 29(2): 593-604.
H Xia*, D Xiang, W Yang, P Mou. The segmented non-uniform dielectric module design for uniformity control of plasma profile in a capacitively coupled plasma chamber[J]. AIP Advances, 2014, 4(12): 127124.
H Xia*, D Xiang, P Mou. Simulation-Based Optimization of a Vector Showerhead System for the Control of Flow Field Profile in a Vertical Reactor Chamber[J]. Advances in Mechanical Engineering, 2014, 6: 525102.
学术兼职
中国图学学会智能工厂专委会委员
北京粘接学会理事
中国机械工程学会高级会员
国家自然科学基金委《机械工程学科发展战略报告》“高性能装配”领域十四五规划撰写专家
ADDIT. MANUF. (AM), RAPID PROTOTYPING J. (RPJ), SURF. COAT. TECH. (SCT), PHYS. FLUIDS (POF), INT. J. HEAT MASS TRAN. (IJHMT)等十余种国际期刊审稿人
京公网安备 11010802027423号