近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Bao Yue, Liu Xiandong(*), Yao Zhengcheng, Shan Yingchun, He Tian. Vibration energy accumulation and absorption characteristics of pseudo acoustic black hole wedge. Mechanics of Advanced Materials and Structures, Accepted.
Bao Yue, Liu Xiandong(*), Wang Zongnan, Shan Yingchun, He Tian. Numerical and experimental investigations of multiple resonators on reducing tyre cavity resonance noise. Acoustics Australia, Online, DOI:10.1007/s40857-023-00292-x
Zhang Yue, Shan Yingchun, Liu Xiandong, He Tian. A novel numerical method for quantifying the combined effect of tire on 13-degree impact test of automotive wheels made of lightweight materials. IMechE Part D: Journal of Automobile Engineering, Accepted.
Zhang Yue, Liu Xiandong, He Tian, Wan Xiaofei, Shan Yingchun.13-degree impact test of long-fiber-reinforced thermoplastic composite wheel manufactured by injection molding - Improved co-simulation approach and experimental investigation. International Journal of Impact Engineering, 2023, 174: 104517.
Bao Yue, Liu Xiandong(*), Zhao Wei, Shan Yingchun, He Tian. Design of Helmholtz resonator group in a lightweight aluminum alloy wheel for reducing tire acoustic cavity resonance noise. Applied Acoustics, 2022, 201: 109124.
Bao Yue, Liu Xiandong(*), Yao Zhengcheng, Zhang Yue, Shan Yingchun, He Tian. Damping evolution mechanism of panel embedded with heterogeneous acoustic black hole array. Acta Mechanica Sinica, 2023, 39: 522270.
Bao Yue, Liu Xiandong(*), Yao Zhengcheng, Shan Yingchun, He Tian. Research on vibration absorption and isolation characteristics of periodic acoustic black hole beam resonators and their enhancement. International Journal of Applied Mechanics, 2023, 15(1): 2350002.
Bao Yue, Liu Xiandong(*), Shan Yingchun, et al. Convergence performance of flexural wave in the unconventional acoustic black hole. Mathematics and Mechanics of Solids, 2022,online, DOI10.1177/10812865221117306.
Liang Haoming, Liu Xiandong(*), Yuan Jiakai, et al. Influence of Acoustic Black Hole Array Embedded in a Plate on Its Energy Propagation and Sound Radiation. Applied Sciences, 2022, 12(3): 1325.
Liu Xiandong(*), Zhao Wei, Hu Xiaojun,Shan Yingchun, Tian He. Research on the Resonance Frequency Splitting Mechanism and Novel Modal Characteristics of a Rotating Tire Acoustic Cavity. Journal of Vibration and Control, 2022, online, https://doi.org/10.1177/10775463221075401.
Wang Xiaoran, Liu Xiandong, He Tian(*), Xiao Denghong, Shan Yingchun. Structural damage acoustic emission information enhancement through acoustic black hole mechanism. Meaurement, 2022, 190:110673
Hu Xiaojun,Liu Xiandong(*), Shan Yingchun, He Tian. Research on Split and Evolution of Acoustic Cavity Resonance Frequency of Rotating Loaded Tire. Journal of Vibration and Control, 2021, online, DOI: 10.1177/10775463211048270
Zhao Wei, Liu Yuting Liu, Liu Xiandong(*), Shan Yingchun, Hu Xiaojun. Analysis of Tire Acoustic Cavity Resonance Energy Transmission Characteristics in Wheels Based on Power Flow Method. Appl. Sci. 2021, 11, 3979.
Zhang Yue, Shan, Yingchun, Liu Xiandong(*), He Tian. An integrated multi-objective topology optimization method for automobile wheels made of lightweight materials. Structural and Multidisciplinary Optimization, 2021,64(3):1585-1605.
Hu Xiaojun, Liu Xiandong(*), Shan, Yingchun, He Tian. Simulation and Experimental Validation of Sound Field in a Rotating Tire Cavity Arising from Acoustic Cavity Resonance. Applied Sciences, 2021, 11(3): 1121.
Tai Junfei, Liu Xiandong, Wang Xiaoran, Shan Yingchun, He Tian(*). An adaptive localization method of simultaneous two acoustic emission sources based on energy filtering algorithm for coupled array signal. Mechanical Systems and Signal Processiong, 2021, 154: 107557.
Liu Yuting, Liu Xiandong(*), Shan Yingchun, Hu Xiaojun, Yi Jiajing. Research on mechanism and evolution features of frequency split phenomenon of tire acoustic cavity resonance. Journal of Vibration and Control, 2021, 27(3-4): 343-355.
Daijun Hu, Yingchun Shan, Tian He, Xiandong Liu(*), Analysis on Effect of Injection Residual Stress on Impact Resistance of Composite Wheel Made of Long Glass Fiber Reinforced Thermoplastic. International Journal of Crashworthiness, 2021, 26(5): 515-525.
Wang, Xiaoran, Liu, Xiandong, He, Tian,Tai, Junfei,Shan, Yingchun. A Novel Joint Localization Method for Acoustic Emission Source Based on Time Difference of Arrival and Beamforming. Applied Sciences-BASEL, 2020, 10(22):8045.
Yang Chen, Xiandong Liu(*), Yingchun Shan, Tian He. Lightweight design of drive axle housing based on reliability. Int. J. Vehicle Performance, 2020, 6(3):294-309.
Xiaojun Hu, Xiandong Liu(*), Xiaofei Wan, Yingchun Shan, Jiajing Yi. Experimental analysis of sound field in the tire cavity arising from the acoustic cavity resonance. Applied Acoustics, 2020.4, 161:107172..[期刊]
Zhixing Li, Xiandong Liu, Xiaoran Wang, Tian He, Yingchun Shan. A Periodic Potential Underdamped Stochastic Resonance Method and Its Application for Gear Fault Diagnosis. IEEE Access, 2019, 7(1): 141633-141647.
Xiaoran Wang, Tian He, Yongjun Shen, Yingchun Shan, Xiandong Liu(*). Parameters Optimization and Performance Evaluation for the Novel Inerter-Based Dynamic Vibration Absorbers with Negative Stiffness. Journal of Sound and Vibration, 2019, 463: 114941
Tian He, Junfei Tai, Yingchun Shan, Xiaoran Wang, Xiandong Liu(*). A Fast Acoustic Emission Beamforming Localization Method Based on Hilbert Curve. Mechanical Systems and Signal Processing, 2019, 133: 106291
Zhixing Li, Xiandong Liu, Xiaoran Wang, Tian He, Yingchun Shan. A multi-parameter constrained potential underdamped stochastic resonance method and its application for weak fault diagnosis. Journal of Sound and Vibration, 2019, 459:114862
Qian Gao, Yingchun Shan, Xiaofei Wan, Qizhang Feng,Xiandong Liu(*). 90-degree impact bench test and simulation analysis of automotive steel wheel. Engineering Failure Analysis. 2019, 105: 143-155
Daijun Hu, Yingchun Shan Tian He, Xiandong Liu(*), Xiaofei Wan. Research on simulation method of impact resistance of composite wheels made of long glass fiber reinforced thermoplastic introducing anisotropic property. Composite Structures. 2019,223(1)110965:1-9
Xiaofei Wan, Xiandong Liu (*), Yingchun Shan，Er Jiang，Haiwen Yuan. Numerical and experimental investigation on the effect of tire on the 13°impact test of automotive wheel. Advances in Engineering Software, 2019, 133: 20–27
Di Qu, Xiandong Liu, Guangtong Liu, Yifan Bai,Tian He. Analysis of Vibration Isolation Performance of Parallel Air Spring System for Precision Equipment Transportation. Measurement and Control, 2019, 52(3-4): 291-302.
刘禹, 单颖春, 刘献栋, 何田. 高温对汽车灰铸铁制动盘热疲劳裂纹萌生寿命的影响. 机械工程学报，2019, 55(8)：97-105
刘雨婷, 胡代钧, 刘献栋, 单颖春, 路洪洲. 汽车结构轻量化设计中的轻量化极限及所用材料强度上限分析. 汽车工程，2019, 41(8): 892-895.
Zhishuai Wan,Xiandong Liu(*) etc. The Effect of Rigid Particle on Friction Properties of Automotive Disk Brake Based on a Local Modeling. Journal of Tribology-Transaction of ASME, 2019, 141（4）: 041403（1-10）.
Jiajing Yi, Xiandong Liu(*),Yingchun Shan, He Dong. Characteristics of sound pressure in the tire cavity arising from acoustic cavity resonance excited by road roughness. Applied Acoustics, 2019, 146: 218–226.
Weihao Chai, Xiandong Liu, Yingchun Shan, Xiaofei Wan, Er Jiang. Finite element analysis of the residual stress of automotive wheel made of long glass fiber-reinforced thermoplastic composite. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2019, 233(10): 3592-3602
Zhishuai Wan, Xiandong Liu(*), Haixia Wang, Yingchun Shan. Research on the Time-varying Properties of Brake Friction (August 2018), IEEE Access, 2018,6: 69742-69749.
Xiaoran Wang, Xiandong Liu, Junfei Tai, Yingchun Shan . A novel reduction method of reducing the boundary reflected acoustic emission wave reflected by boundary with based on acoustic black hole. Ultrasonics, 2019, 94: 292-304
Weihao Chai, Xiandong Liu, Yingchun Shan, Xiaofei Wan, Er Jiang. Research on simulation of the bending fatigue test of automotive wheel made of long glass fiber reinforced thermoplastic considering anisotropic property. Advances in Engineering Software, 2018, 116: 1-8
Tian He, Ying Xie, Yingchun Shan, Xiandong Liu (*). Localizing Two Acoustic Emission Sources Simultaneously Using Beamforming and Singular Value Decomposition. Ultrasonics, 2018, 85:3-22.
Jian Wu, Xiandong Liu(*), Yingchun Shan, Tian He. Robustness Optimization of Engine Mounting System based on Six Sigma and TRA Decoupling Method. Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, 2019, 233（4）: 1047-1060.
Xiaoran Wang, Xiandong Liu, Yingchun Shan, Yongjun Shen,Tian He. Analysis and Optimization of The Novel Inerter-based Dynamic Vibration Absorbers. IEEE Access, 2018, 6(1): 33169 -33182.
Xiaofei Wan, Yingchun Shan, Xiandong Liu(*), Tian He, Jiegong Wang. Tire-rim interface pressure of a commercial vehicle wheel under radial loads: theory and experiment. Measurement Science and Technology, 2017, 28(11): 115008(1-9).
Yue Pan, Xiandong Liu(*), Yingchun Shan, Gang(Sheng) Chen. Complex modal analysis of serpentine belt drives based on beam coupling model. Mechanism and Machine Theory, 2017, 116: 162-177.
Jian Wu, Yingchun Shan, Xiandong Liu(*), Tian He. Parameter optimisation of engine mounting system based on TRA decoupling. International Journal of Vehicle Design. 2017, 74(1): 41-61.
Yaoguang Liu, Xiandong Liu(*), Jun Xu, Xiaojun Hu, Zhaowang Xia. Inverse identification of the acoustic porous parameters of double-layered poroelastic structures by acoustic rigidity approximation. Journal of the Acoustical Society of America. 2017, 142(1): 72-83.
Ke Shang, Xiandong Liu(*), Emmanuel Moureh-Ledig. Squeal simulation and analysis of brake system with pressure and speed dependent friction model and exerting process of pressure. Journal of Vibroengineering. 2017, 19(3): 2090-2105.
Xiandong Liu, Denghong Xiao, Yingchun Shan, Qiang Pan, Tian He, Yong Gao. Solder joint failure localization of welded joint based on acoustic emission beamforming. Ultrasonics, 2017, 74: 221-232.
Xiaoyin Wang, Xiandong Liu, Yingchun Shan, Xiaofei Wan, Wanghao Liu and Yue Pan. Lightweight design of automotive wheel made of long glass fiber reinforced thermoplastic. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science. 2016, 230(10): 1634-1643.
Dong Shang, Xiandong Liu(*), Yinchun Shan, Er Jiang. Research on the stamping residual stress of steel wheel disc and its effect on the fatigue life of wheel. International Journal of Fatigue. 2016, 93: 173–183.
Xiaofei Wan, Yingchun Shan, Xiandong Liu(*), Haixia Wang, Jiegong Wang. Simulation of biaxial wheel test and fatigue life estimation considering the influence of tire and wheel camber. Advances in Engineering Software. 2016, 92: 57-64.
Tian He, Wu Ye, Qiang Pan, Xiandong Liu. An automatic abrupt information extraction method based on singular value decomposition and higher-order statistics. Measurement Science and Technology. 2016, 27(2): 025007.
京公网安备 11010802027423号