近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
代表论文
2019年：
1. Yu Gong*, Bing Zhang, Libin Zhao*, Jianyu Zhang*, Ning Hu, Chuanzeng Zhang. R-curve behaviour of the mixed-mode I/II delamination in carbon/epoxy laminates with unidirectional and multidirectional interfaces. Composite Structures. 2019 (223), 110949.
2. Shihao Yin, Yu Gong*, Wangchang Li, Libin Zhao*, Jianyu Zhang*, Ning Hu. A novel four-linear cohesive law for the delamination simulation in composite DCB laminates. Composites Part B: Engineering. 2019 (180), 107526.
3. Kangkang Wang, Libin Zhao*, Haiming Hong, Yu Gong, Jianyu Zhang* and Ning Hu. An analytical model for evaluating the buckling, delamination propagation, and failure behaviors of delaminated composites under uniaxial compression. Composite Structures. 2019 (223), 110937
4. Kangkang Wang, Libin Zhao*, Haiming Hong, Jianyu Zhang*, Ning Hu. An extended analytical model for predicting the compressive failure behaviors of composite laminate with an arbitrary elliptical delamination. International Journal of Solids and Structures, 2019, 185-186: 439-447.
5. Yu Gong*, Libin Zhao*, Jianyu Zhang*, Ning Hu and Chuanzeng Zhang. An insight into three approaches for determining fatigue delamination resistance in DCB tests on composite laminates. Composites Part B: Engineering. 2019 (176), 107206.
6. Libin Zhao, Ziang Fang, Fengrui Liu*, Meijuan Shan, Jianyu Zhang*. A modified stiffness method considering effects of hole tensile deformation on bolt load distribution in multi-bolt composite joints. Composites Part B: Engineering, 2019, 171: 264-271.
7. Fengrui Liu, Ziang Fang, Libin Zhao*, Jianyu Zhang*, Ning Hu. A failure-envelope-based method for the probabilistic failure prediction of composite multi-bolt double-lap joints. Composites Part B: Engineering, 2019, 172: 593-602.
2018年：
1.Libin Zhao*, Yang Li, Jianyu Zhang*, Longwei Zhou, Ning Hu. A novel material degradation model for unidirectional CFRP composites. Composites Part B. 2018, 135: 84-94.
2.Yu Gong, Libin Zhao*, Jianyu Zhang*, Ning Hu. An improved power law criterion for the delamination propagation with the effect of large-scale fiber bridging in composite multidirectional laminates. Composite Structures. 2018, 184: 961-968.
3.Fengrui Liu, Xuheng Lu, Libin Zhao*, Jianyu Zhang*, Ning Hu, Jifeng Xu. An interpretation of the load distributions in highly torqued single-lap composite bolted joints with bolt-hole clearances. Composites Part B. 2018, 138: 194-205.
4.Meijuan Shan, Libin Zhao*, Haiming Hong, Fengrui Liu, Jianyu Zhang*. A progressive fatigue damage model for composite structures in hygrothermal environments. International Journal of Fatigue. 2018, 111: 299-307.
5.Fengrui Liu, Meijuan Shan, Libin Zhao*, Jianyu Zhang*. Probabilistic bolt load distribution analysis of composite single-lap multi-bolt joints considering random bolt-hole clearances and tightening torques. Composite Structures. 2018, 194: 12-20.
6.Fengrui Liu, Xuheng Lu, Libin Zhao*, Jianyu Zhang*, Jifeng Xu, Ning Hu. Investigation of bolt load redistribution in double-lap, multi-bolt composite joints. Composite Structures. 2018, 202: 397-405.
7.Libin Zhao*, Wen Yang, Tiancheng Cao, Haibo Li, Baorui Liu, Chao Zhang, Jianyu Zhang*. A progressive failure analysis of all-C/SiC composite multi-bolt joints. Composite Structures. 2018, 202: 1059-1068.
8.Kangkang Wang, Libin Zhao*, Haiming Hong, Jianyu Zhang*. A strain-rate-dependent damage model for evaluating the low velocity impact induced damage of composite laminates. Composite Structures. 2018, 201: 995-1003.
9.Longwei Zhou, Libin Zhao, Fengrui Liu*, Jianyu Zhang*. A micromechanical model for longitudinal compressive failure in unidirectional fiber reinforced composite. Results in Physics. 2018, 10: 841-848.
10.Yu Gong, Libin Zhao*, Jianyu Zhang*, Ning Hu. A novel model for determining the fatigue delamination resistance in composite laminates from a viewpoint of energy. Composites Science and Technology. 2018, 167: 489-496.
2017年以前：
1. Zhao L, Wang Y, Zhang J*, et al. XFEM-based model for simulating zigzag delamination growth in laminated composites under mode I loading[J]. Composite Structures, 2017, 160:1155-1162.
2. Zhao L, Gong Y, Zhang J*, et al. A novel interpretation of fatigue delamination growth behavior in CFRP multidirectional laminates[J]. Composites Science & Technology, 2016, 133:79-88.
3. Zhao L, Wang Y, Zhang J*, et al. An interface-dependent model of plateau fracture toughness in multidirectional CFRP laminates under mode I loading[J]. Composites Part B Engineering, 2017, 131.
4. Gong Y, Zhao L, Zhang J*,, et al. Delamination propagation criterion including the effect of fiber bridging for mixed-mode I/II delamination in CFRP multidirectional laminates[J]. Composites Science & Technology, 2017, 151.
5. Zhao, L., Shan, M., Hong, H., Qi, D., Zhang J*, & Hu, N.. A residual strain model for progressive fatigue damage analysis of composite structures. Composite Structures, 2016，169.
6. Zhang Jianyu *, Shi Xinhong, Fei Binjun. High cycle fatigue and fracture mode analysis of 2A12-T4 aluminum alloy under out-of-phase axial-torsion constant amplitude loading. International Journal of Fatigue. 2012, 38:144-154.
7. Zhang Jianyu *, Shi Xinhong, Bao Rui and Fei Binjun. Tension-torsion high-cycle fatigue failure analysis of 2A12-T4 aluminum alloy with different stress ratios. International Journal of Fatigue. 2011,33(8):1066-1074.
8. Zhang Jianyu*, Peng Lei, Zhao Libin, Fei Binjun. Fatigue Delamination Growth Rates and Thresholds of Composite Laminates under Mixed Mode Loading. International Journal of Fatigue. 2012, 40:7-15.
9. Zhang Jianyu *, Liu Fengrui, Zhao Libin, Fei Binjun. A novel characteristic curve for failure prediction of multi-bolt composite joints. Composite Structures. 2014, 108:129-136.
10. Zhang Jianyu*, Liu Fengrui, Libin Zhao, Chen Yuli, Fei Binjun. A progressive damage analysis based characteristic length method for multi-bolt composite joints. Composite Structures. 2014, 108:915-923.
11. Zhang Jianyu, Zhao Libin, Qin Tianliang, Fu Yue, Fei Binjun. Influence of p overlaminates on the mechanical behavior of all-composite adhesively bonded p joints. Journal of Reinforced Plastics and Composites 2014, 33(10):923-934.
12. Zhang Jianyu*, Xiao Qingshan, Shi Xinhong, Fei Binjun. Effect of Mean Shear Stress on Torsion Fatigue Failure Behavior of 2A12-T4 Aluminum Alloy. International Journal of Fatigue. 2014, 67:173-182.
13. Peng Lei (Ph.D. Candidate), Zhang Jianyu *, Zhao Lilin, Bao Rui, Yang Hongqin, Fei Binjun. Mode I Delamination Growth of Multidirectional Composite Laminates under Fatigue Loading. Journal of Composite Materials. 2011, 45(10):1077-1090.
14. Zhang Jianping (Ph.D. Candidate), Zhang Jianyu*, Bao Rui, Zheng Xiaoling. Study of Methods for Evaluating the Probability of Multiple Site Damage Occurrences. Science China Physics, Mechanics & Astronomy. 2014, 57(1):65-73.
15. Qin Tianliang (Ph.D. Candidate), Zhao Libin, Zhang Jianyu*. Fastener effects on mechanical behaviors of double-lap composite joints. Composite Structures. 2013, 100:413-423.
16. Zhao Libin, Zhang Xiaoxiao, Zhang Jianyu*, Huang Hai, Liang Xianzhu. Failure Analysis of Woven Composite Π Joint under Bending Load. Advanced Science Letters. 2011, 4(8-10):2752-2758.
17. Chen Yuli, Wang Shengtao, Pan Fei, Zhang Jianyu *. A numerical study on electrical percolation of polymer matrix composites with hybrid fillers of carbon nanotubes and carbon black. Journal of Nanometerials. 2014, 2014: 614797.
18. Zhao Libin, Gong Yu, Zhang Jianyu *, Chen Yuli, Fei Binjun. Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements. Composite Structures. 2014, 116:509-522.
19. Zhao Libin, Qin Tianliang, Zhang Jianyu *, Shan Meijuan, Fei Binjun. Determination method of stress concentration relief factors for failure prediction of composite multi-bolt joints. Journal of Composite Materials. 2014.
20. Fu Yue (Ph.D. Candidate), Zhang Jianyu, Zhao Libin. Strength Prediction of Composite Π Joint under Bending Load and Study of Geometric and Material Variations Effects. Journal of Composite Materials. 2013, 47(8):1029-1038.
21. Tian Hailing, Bao Rui, Zhang Jianyu, Zheng Xiaoling, Fei Binjun. The Influence of Low Load Truncation Level on Crack Growth for Al 2324-T39 and Al 7050-T7451. Chinese J. of Aeronautics. 2009, 22(4):401-406.
22. Zhao Libin, Qin Tianliang, Shenoi Ramanand Ajit, Zhang Jianyu, Liang Xianzhu, Huang Hai. Strength Prediction of Composite Π Joint Under Tensile Load. Journal of Composite Materials. 2010,44(23):2759-2778.
23. Yang Hongqin (Ph.D. Candidate), Bao Rui, Zhang Jianyu, Peng Lei, Fei Binjun. Crack Growth Behaviour of a Nickel-based Powder Metallurgy Superalloy under Elevated Temperature. International Journal of Fatigue. 2011, 33(4):632-641.
24. Yang Hongqin (Ph.D. Candidate), Bao Rui, Zhang Jianyu, Peng Lei, Fei Binjun. Creep-fatigue crack growth behaviour of a nickel-based powder metallurgy superalloy under high temperature. Engineering Failure Analysis. 2011, 18(4):1058-1066.
25. Liu Hao (Ph.D. Candidate), Bao Rui, Zhang Jianyu, Fei Binjun. A creep-fatigue crack growth model containing temperature and interactive effects. International Journal of Fatigue. 2014, 59:34-42.
26. Zhao Libin, Qin Tianliang, Chen Yuli, Zhang Jianyu. Three dimensional progressive damage models for cohesively bonded composite π joint. Journal of Composite Materials. 2014, 48(6): 707-721.
27. Bao Rui, Yang Hongqin, Zhang Jianyu, Peng Lei, Fei Binjun. Fatigue crack growth measurement in a superalloy at elevated temperature. International Journal of Fatigue. 2013, 47:189-195.
28. Liu Fengrui (Ph.D. Candidate), Zhao Libin, Mehmood Saqib, Zhang Jianyu, Fei Binjun. A modified failure envelope method for failure prediction of multi-bolt composite joints. Composites Science and Technology. 2013, 83:54-63.
29. Zhao Libin, Gong Yu, Qin Tianliang, Mehmood Saqib, Zhang Jianyu. Failure prediction of out-of-plane woven composite joints using cohesive element. Composite Structures. 2013, 106:407-416.
30. Zhao Libin, Qin Tianliang, Zhang Jianyu, Shenoi Ramanand Ajit. Modified Maximum Stress Failure Criterion for Composite π Joints. Journal of Composite Materials. 2013, 47(23):2995-3008. (SCI: 000329545100001, IF: 1.257, 2013 JCR Materials Science, Composites Q2, 9/23)
31. Peng Lei, Xu Jifeng, Zhang Jianyu, Zhao Libin. Mixed mode delamination growth of multidirectional composite laminates under fatigue loading. Engineering Fracture Mechanics. 2012, 96:676-686.
京公网安备 11010802027423号