个人简介
教育经历：
1991.09-1995.07 湖南科技大学机械设计及理论专业，获学士学位
1999.09-2002.07 河南理工大学机械设计制造及其自动化专业，获硕士学位
2005.03-2008.02 中国矿业大学(北京)机械设计及理论专业，获博士学位
工作经历：
1995.07-1999.09 湖南科技大学机电工程学院，讲师
2002.07-2005.03 湖南科技大学机电工程学院，讲师，副教授
2008.03-至今 北京科技大学机械工程学院，副教授，教授，博士生导师
2016.09-2017.09 英国华威大学，访问学者
近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
近期代表性论著：
[1] Chen Ping*, Xiaojie Liu, Mingji Huang, Zhe Shi, Bin Shan. Numerical simulation and experimental study on tribological properties of stamping die with triangular texture. Tribology International, 2019, 132, 244-252.
[2] Ping Chen*, Yuan Wang, Jianchao Li, Hui Wang, Lei Zhang. Adhesion and Erosion Properties of Epoxy Resin Composite Coatings Reinforced with Fly Ash Cenospheres and Short Glass Fibers. Progress in Organic coatings, 2018, 125:489-499.
[3] Jianchao Li, LiFeng Zheng, Xiaohua Sha, Ping Chen*. Microstructural and mechanical characteristics of graphene oxide‐fly ash cenosphere hybrid reinforced epoxy resin composites. Journal of Applied Polymer, 2018, 47173-47180.
[4] Chen Ping*, Li Junling, Li Yunlong. Effect of geometric micro-groove texture patterns on the tribological performance of stainless steel. Journal of Central South University, 2018, 25:331-341.
[5] Chen Ping*, Li Jianchao, Zhang Lei. Analysis of mechanical characteristics of fly ash cenospheres reinforced epoxy composites. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2018, 33(1):139-145.
[6] Ping Chen*, Yingqian La. Microstructure and tribological behavior of stripe patterned TiN film prepared with filtered cathodic vacuum arc deposition (FCVAD). Advanced Engineering Materials, 2017:1-7.
[7] Chen Ping*, Li Junling, Shi Zhe, Xiang Xin. Numerical optimization of gourd-shaped surface texture and experiment of tribological performance. Journal of Central South University, 2017, 24:2773-2782.
[8] Ping Chen*, Xin Xiang, Tianmin Shao, Yingqian La, Junling Li. Effect of triangular texture on the tribological performance of die steel with TiN coatings under lubricated sliding condition. Applied Surface Science, 2016, 389:361-368.
[9] Junlin Li, Baoyu Wang, He Huang, Shuang Fang, Ping Chen, Jinxia Shen. Unified modelling of the flow behaviour and softening mechanism of a TC6 titanium alloy during hot deformation, 2018, 748: 1031-1043.
[10] Yanhong Gu, Lingling Chen, Wen Yue, Ping Chen, Fei Chen, Chengyun Ning. Corrosion behavior and mechanism of MAO coated Ti6Al4V with a grain-fined surface layer. Journal of Alloys and Compounds, 2016, 664:770-776.
[11] Wang Yunfei, Xi Yin, Chen Ping*, Wan Jing. Combination of splicing visualization and assembling visualization during education carried by self-optimizing student presentation. Computer Aided Drafting Design and Manufacturing, 2015, 25(2): 60-64.
[12] 陈平*，史哲，剌颖乾，项欣. 基于凹模压边区摩擦学性能的冲压仿真分析. 中国表面工程, 2018,31(1):59-66.（EI）
[13] 陈平*，马勇，万建成，江明等. 考虑股线接触与摩擦行为的710mm2碳纤维复合芯导线(ACCC) 股线损伤分析. 摩擦学学报, 2017,37(5):565-573.（EI）
[14] 陈平*，李俊玲，邵天敏，项欣，刘光磊. 考虑表面张力影响的表面织构最优参数分析. 机械工程学报, 2016,52(19):123-131.（EI）
[15] 陈平*，项欣，李俊玲，邵天敏，刘光磊. 沟槽型织构摩擦学性能的数值模拟与实验研究. 材料工程, 2016,44(6):31-37.（EI）
[16] 陈平*，马峰，梅华锋，赵海林，佘建民. 高铝微珠/环氧树脂复合材料冲蚀磨损特性. 北京科技大学学报, 2014,36(2):218-225.（EI）
学术兼职
北京高校机械类专业群专家委员会秘书长兼教学协作委员会秘书长、计算机图形专业委员会委员
京公网安备 11010802027423号