近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
K. Liu, X.W. Kong, J.J. Yu, Operation mode analysis of lower-mobility parallel mechanisms based on dual quaternions, Mechanism and Machine Theory, 2019, 142: 10357
F.H. Meng, J.J. Yu, D. Alaluf, B. Mokrani, A. Preumont. Modal flexibility based damage detection for suspension bridge hangers: A numerical and experimental investigation, Smart Structures and Systems, 2019, 23(1): 15-29.
W.S. Ma, Y.Q. Yang, and J.J. Yu. General routine of suppressing single vibration mode by multi-DOF tuned mass damper: Application of three-DOF, Mechanical Systems and Signal Processing, 2019, 121: 77-96.
Y. Xie, X. Pei, and J.J. Yu. Double-layer sandwich annulus with ultra-low thermal expansion. Composite Structures, 2018, 203: 709-717.
Y. Xie, J.J. Yu, H.Z. Zhao. Deterministic design for a compliant parallel universal joint with constant rotational stiffness, Journal of Mechanisms and Robotics, Transactions of the ASME, 2018, 10(5): 031006.
X.B. He, J.J. Yu, G.B. Hao. Effect of degree-of-symmetry on kinetostatic characteristics of flexure mechanisms: a comparative case study, Chinese Journal of Mechanical Engineering, 2018, 31(1): 1-12.
N. Ma, J.J. Yu, X. Dong, et al. Design and stiffness analysis of a class of 2-DoF tendon driven parallel kinematics mechanism, Mechanism and Machine Theory, 2018, 129: 202-217.
Y. Wang, J.J. Yu, X. Pei. Fast forward kinematics algorithm for real-time and high-precision control of the 3-RPS parallel mechanism, Frontiers of Mechanical Engineering, 2018, 13(3): 368-375.
J.J. Yu, Z. Jin, X.W. Kong. Identification and comparison for continuous motion characteristics of three two-degree-of-freedom pointing mechanisms. Journal of Mechanism and Robotics, Transactions of the ASME, 2017, 9(5): 051015.
J.J. Yu, K. Wu, G.H. Zong, X.W. Kong. A Comparative study on motion characteristics of three two-degree-of-freedom pointing mechanisms. Journal of Mechanism and Robotics, Transactions of the ASME, 2016, 8(2): 021027.
J.J. Yu, D.F. Lu, G.B. Hao. Design and analysis of a 2-DOF compliant parallel pan-tilt platform, Meccanica, 2016, 51(7): 1559-1570.
J.J. Yu, Special issue: Mechanisms and robotics, Frontiers of Mechanical Engineering, 2016, 11(2): 117-118.
G.B. Hao, J.J. Yu. Design, modelling and analysis of a completely-decoupled XY compliant parallel manipulator. Mechanism and Machine Theory, 2016, 102: 179-195.
G.B. Hao, J.J. Yu, H.Y. Li. A brief review on nonlinear modeling methods and applications of compliant mechanisms, Frontiers of Mechanical Engineering, 2016, 11(2): 119-128.
G.B. Hao, H.Y. Li. S. Kemalcan, G.M. Chen, J.J. Yu. Understanding coupled factors that affect the modelling accuracy of typical planar compliant mechanisms, Frontiers of Mechanical Engineering, 2016, 11(2): 129-134.
J.J. Yu, X. Yan, Z.G. Li, G.B. Hao. Design and experimental testing of an improved large-range decoupled XY compliant parallel micromanipulator, Journal of Mechanism and Robotics, Transactions of the ASME, 2015, 7(4): 044503.
J.J. Yu, D.F. Lu, Z.X. Zhang, X. Pei. Motion capability analysis of a quadruped robot as a parallel manipulator, Frontiers of Mechanical Engineering, 2015, 9(4): 295-307.
M. Jia, R.P. Jia, J.J. Yu. A Compliance-based parameterization approach for type synthesis of flexure mechanisms, Journal of Mechanism and Robotics, Transactions of the ASME, 2015, 7(3): 031014.
X.W. Kong, J.J. Yu. Type synthesis of 2-DOF 3-4R parallel mechanisms with both spatial parallelogram translational mode and equal-diameter spherical rotation mode, Journal of Mechanism and Robotics, Transactions of the ASME, 2015, 7(4): 041018.
X.W. Kong,J.J. Yu, D.L. Li. Reconfiguration analysis of a two degrees-of-freedom 3-4r parallel manipulator with planar base and platform, Journal of Mechanism and Robotics, Transactions of the ASME, 2015, 8(1): 011019.
K. Wu, J.J. Yu, G.H. Zong, et al. A family of rotational parallel manipulators with equal-diameter spherical pure rotation, Journal of Mechanism and Robotics, Transactions of the ASME, 2014, 6(1): 011008.
X. Pei, J.J. Yu, G.H. Zong, S.S. Bi. Design of compliant straight-line mechanisms using flexural joints, Chinese Journal of Mechanical engineering, 2014, 27(1): 146-153.
S.Z. Li, J.J. Yu. Design principle of high-precision flexure mechanisms based on parasitic-motion compensation, Chinese Journal of Mechanical Engineering, 2014, 27(4): 663-672.
J.J. Yu, S.Z. Li, C. Qiu.An analytical approach for synthesizing line actuation spaces of parallel flexure mechanisms,Journal of Mechanical Design, Transactions of the ASME, 2013, 135(6): 12450.
J.J. Yu, X. Dong, X. Pei, X.W. Kong. Mobility and singularity analysis of a class of 2-DOF rotational parallel mechanisms using a visual graphic approach, Journal of Mechanism and Robotics, Transactions of the ASME,2012, 4(4): 041006.
J.J. Yu, W. Li, X. Pei, S.S. Bi, G.H. Zong. A compound load simulator based on zero-torsion parallel mechanisms, Frontiers of Mechanical Engineering, 2012, 7(1): 92-95.
X. Dong, J.J. Yu, B. Chen, G.H. Zong. Geometric approach for kinematic analysis of a class of 2-DOF rotational parallel manipulators, Chinese Journal of Mechanical engineering, 2012, 25(2): 241-247.
X. Pei, J.J. Yu, G.H. Zong, S.S. Bi. A family of butterfly flexural joints: Q-LITF pivots, Journal of Mechanical Design, Transactions of the ASME, 2012, 134(12): 121005.
S.Z. Li, J.J. Yu, G.H. Zong, H.J. Su. Conditions for realizable configurations in synthesis of constraint-based flexure mechanisms, Chinese Journal of Mechanical Engineering, 2012, 25(6): 1086-1095.
H.Z. Zhao, S.S. Bi, J.J. Yu. A novel compliant linear-motion mechanism based on parasitic motion compensation, Mechanism and Machine Theory, 2012, 50: 15-28.
[31] H.Z. Zhao, S.S. Bi, J.J. Yu. Design of a family of ultra-precision linear motion mechanisms, Journal of Mechanism and Robotics, Transactions of the ASME, 2012, 4(4): 041012.
京公网安备 11010802027423号