近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
李小强，孟庆阔， 杜一凡，陈飞宇，王辉，赵兵. 拧紧策略对航空发动机单螺栓连接预紧力的影响，机械工程学报，录用
LiXiaoqiang, Han Kai, Xu Peng, Wang Haibo, Li Dongsheng, Li Yanle, Li Qing. Experimentaland theoretical analysis on the thickness distribution in multi-stage two pointincremental sheet forming [J]，The International Journal of Advanced Manufacturing Technology, 2020.（Q2, ）
LiXiaoqiang, Han Kai, Song Xu, Wang Haibo,Li Dongsheng, Li Yanle, Li Qing.Experimental and numerical investigation on surface quality for two-pointincremental sheet forming with interpolator[J], Chinese Journal of Aeronautics,2020. (Q1, 2.12)
LIXiaoqiang, Dong Hongrui, WANG Haibo, et al. Effect of strain rate differencebetween inside and outside groove in the M-K model on the prediction of forminglimit of Ti6Al4V at elevated temperature[J]. Transactions of Nonferrous MetalsSociety of China, 2020（Q1，）
董红瑞，李小强，王海波等.不同屈服准则与硬化模型对DP780双相高强钢拉延弯曲（Draw-bending）回弹预测影响规律研究[J]. 机械工程学报，2019 （已录用）
FuyuanLiu, Xiaoqiang Li, Yanle Li, et al. Modelling of the Effects of ProcessParameters on Energy Consumption for Incremental Sheet Forming Process[J].Journal of Cleaner Production, 2019. (共同第一作者，Q1, 7.501) ()
Li Yanle,Zhai Weidong, Wang Zijian, Li Xiaoqiang, et al. Investigation on the materialflow and deformation behavior during ultrasonic-assisted incremental forming ofstraight grooves[J]. Journal of Materials Research and Technology,2019. (通讯作者，Q1, 3.327) ( )
Yanle Li, Zinan Cheng, Xiaoxiao Chen, Yangyang Long, XiaoqiangLi, Fangyi Li, Jianfeng Li, Jens Twiefel. Constitutive modeling and deformationanalysis for the ultrasonic-assisted incremental forming process[J]. InternationalJournal of Advanced Manufacturing Technology, 2019.7
HanKai, Li Xiaoqiang, Peng Xingyi, Wang Haibo, Li Dongsheng, Li Yanle, Li Qing. Experimentaland numerical study on the deformation mechanism of straight flanging by incrementalsheet forming[J]. International Journal of Mechanical Sciences, 2019, 160,75-89
HR Dong, X Q Li, H B Wang, G Q Guo, D S Li. Influence of Thickness and InitialGroove Angle in M-K Model on Limit Strain of 7B04 by ConsideringThrough-thickness Stress[J]. Chinese Journal of Aeronautics, 2019.3
李兆宇，李小强，金朝海，穆兴科，王亮，沈重. 航空航天复杂产品装配仿真实施方案研究. 航天制造技术，201902，1: 60-65
TongshengDeng， Dongsheng Li， Xiaoqiang Li. Temperaturevariation model of titanium alloy L-angle profile in hot stretch forming withresistance heating，International Journal of AdvancedManufacturing Technology (2018) 95:2105–2110
李小强,董红瑞,张永生,等.板材数控热渐进成形工艺研究进展[J].塑性工程学报,2018,25(05):87-98.
陈飞宇,李小强,董红瑞,等.不同预紧力分散度条件下螺栓止口连接组件有限元分析[J].航空制造技术,2018,61(20):63-68.
ZhaiYunong, Li Xiaoqiang, Wang Liang, Li Dongsheng, Three-dimensional layer-by-layerstress analysis of single-lap, countersunk composite joints with varyingjoining interface conditions, Composite Structures, 2018.15， V202: 1021-1031 （2018年5月3日，通讯作者：李东升）
邓同生; 李东升; 李小强; 李尚; 卢娇, 基于有限元反求的热拉弯成形界面接触换热系数研究, V25(3): 235-241
邓同生;李尚;卢娇;刘鑫;李东升;李小强, 钛合金型材精密挤压技术国内外研究现状. 锻压技术，201806，V43（6）：1-9
LiXiaoqiang, Han Kai, Li Zhaoyu, Li Dongsheng, Zhang Li. One novel method toimprove surface quality in incremental sheet forming， Procedia Engineering, V207: 842-847, 2017
GuoGuiqiang, Li Dongsheng, Li Xiaoqiang, Deng Tongsheng, Wang Shuo. Finite elementsimulation and process optimization for hot stretch bending of Ti-6Al-4Vthin-walled extrusion, International Journal of Advanced ManufacturingTechnology , 2017, V92(5–8): 1707–1719
李小强;冯丽;翟雨农;李东升;尹玉;王亮. 复合材料层合板沉头螺栓接头拉伸性能试验与有限元仿真. 航空制造技术. 2017,22: 38-44
张鑫,于长旺,李小强.橡皮囊液压成形回弹补偿技术比较分析[J].航空制造技术,2017(18):32-35+42.
李东升,翟雨农,李小强.飞机复合材料结构少无应力装配方法研究与应用进展[J].航空制造技术,2017(09):30-34.
李小强,杨永真,李东升,金朝海.型材数控拉弯装备技术研究进展[J].锻压技术,2017,42(04):1-7+13.
王志成,何桃,王旭,李小强,李东升.铝合金复杂变截面蒙皮拉形有限元仿真与试验研究[J].锻压技术,2016,41(08):53-58.
詹华,于长旺,张军,万政,刘永刚,李东升,李小强.高强钢拉伸弯曲回弹试验与仿真研究[J].锻压技术,2016,41(06):21-25.
尹玉,李小强,李东升,王亮,翟雨农.复合材料层合板机械连接研究进展[J].航空制造技术,2016(11):72-77.
王辉,周明星,吴宝海,李小强.航空发动机先进材料高性能零部件制造技术进展[J].航空制造技术,2015(22):47-51+59.
王月林,黄烜昭,李小强,李东升,郭贵强.TA15钛合金深腔形零件超塑成形试验与仿真研究[J].锻压技术,2015,40(09):37-42.
白雪山,李雪罡,李小强,张兴民.5B02铝合金管材数控弯曲成形试验与数值模拟研究[J].锻压技术,2015,40(07):68-72.
孙中刚,宋楠,王旭,陈洁,李小强.新型铝锂合金板材塑性流动与各向异性性能试验研究[J].材料科学与工艺,2015,23(03):85-90.
张军,黄烜昭,何浪,李小强,万政,李东升.汽车钢板胀形件刚度和静态残余凹痕抗力试验研究[J].锻压技术,2015,40(05):134-139.
肖军杰,李东升,李小强.Ti-6Al-4V中温应力松弛行为建模及模拟研究（英文）[J].稀有金属材料与工程,2015,44(05):1046-1051.
朱丽,李小强,迟彩楼,张晓巍,王月林.航空钣金材料性能参数与工艺知识库[J].锻压技术,2015,40(04):143-148.
杜建宁,李小强,高岩.典型铝合金型材零件拉弯成形工艺的数值模拟与实验研究[J].锻压技术,2015,40(04):148-151.
肖军杰,李东升,李小强,丁盼,赵凯,黄烜昭,续明进.热拉伸蠕变成形Ti-6Al-4V板材的工艺参数优化（英文）[J].Transactions of Nonferrous Metals Society ofChina,2015,25(02):420-428.
杜建宁,李小强,李鹰,何金萍.液压橡皮成形弯边零件有限元模拟及回弹补偿应用研究[J].飞机设计,2015,35(01):40-43.
张兴振,李小强,李东升,宋楠,孙中刚.新型铝锂合金2060T8板材铣削试验研究[J].航空制造技术,2015(03):46-50.
Zhai Yunong, Li Dongsheng, Li Xiaoqiang, Wang Liang. Anexperimental study on the effect of joining interface condition on bearingresponse of single-lap, countersunk composite-aluminum bolted joints. CompositeStructure, V134:190-198, 2015 (IF=3.318)
Zhai Yunong, LiDongsheng, Li Xiaoqiang, Wang Liang, Yin Yu. An experimental study on theeffect of bolt-hole clearance and bolt torque on single-lap, countersunkcomposite joints. Composite Structure, V127:411-419, 2015 (IF=3.318,000354139800038)
Tongsheng Deng, Dongsheng Li, Xiaoqiang Li, et al. Materialcharacterization, constitutive modeling and validation in hot stretch bendingof Ti-6Al-4V profile [J]. Proceedings of the Institution of MechanicalEngineers, Part B, Journal of Engineering Manufacture. 2015.（SCI）
LiXiaoqiang, Guo Guiqiang, Gao Hongzhi, Li Dongsheng, The flow behavior andforming limit modeling of an Al-Cu-Mg aluminum alloy sheet considering theeffects of pre-strain and solution heat treatment, International Journal ofPrecision Engineering and Manufacturing, V16(5):971-979, 2015 (Q1区)
DengTongsheng, Li Dongsheng, Li Xiaoqiang, Jin Chaohai, Ding Pan. Study on theClamping Capacity of Profile Jaws Based on Finite Element Analysis, TheInternational Journal of Advanced Manufacturing Technology, V78(9): 1847-1855, 201506(Q2区，通讯作者)
京公网安备 11010802027423号