邓建新 - 山东大学 - 机械工程学院

个人简介

1987年获工学学士学位、1990年获工学硕士学位，1995年获工学博士学位 1990.07～1997.10：山东工业大学, 助教、讲师、副教授 1997.10～1998.10：山东工业大学, 教授 1998.10～1999.10：香港: The Hong Kong Polytechnic University, 合作研究 2009.06～2009.12：美国: Kansas State University, 高级访问学者 1999.11～至今：山东大学, 博士导师 2010.01～至今：山东大学, 二级岗位教授

研究领域

高效切削加工、刀具材料、自润滑刀具、刀具涂层技术、摩擦磨损、陶瓷喷嘴及其冲蚀磨损、工程陶瓷产品的研究开发与应用等

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Deng Jianxin, Zhou Jiantou, Zhang Hui. Wear mechanisms of cemented carbide tools in dry cutting of precipitation hardening semi-austenitic stainless steels. Wear. 2011, 270: 520-527 Deng Jianxin, Song Wenlong, Zhang Hui. Friction and wear behaviors of the carbide tools embedded with solid lubricants in sliding wear tests and in dry cutting processes. Wear. 2011, 270: 666-674 Deng Jianxin, Wu Ze, Lian Yunsong. Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes. International Journal of Refractory Metals and Hard Materials. 2012, 30: 164-172 Deng Jianxin, Duan Zhenxing. Fabrication and performance of Al2O3/(W,Ti)C+Al2O3/TiC multilayered ceramic cutting tools. Materials Science Engineering A. 2010, 527: 1039-1047 Deng Jianxin, Song Wenlong, Zhang Hui. Design, fabrication and properties of a new self-lubricated tool in dry cutting. International Journal of Machine Tool and Manufacture. 2009, 49 (1): 66-72 Deng Jianxin, Song Wenlong, Zhang Hui. Performance of PVD MoS2/Zr coated carbide in cutting processes. International Journal of Machine Tool and Manufacture. 2008, 48 (14): 1546-1552 Deng Jianxin, Li Yousheng, Song Wenlong. Diffusion wear in dry cutting of Ti-6Al-4V with WC/Co carbide tools. Wear. 2008, 265 (11-12): 1776-1783 Deng Jianxin, Liu Jianhua, Zhao Jinlong. Friction and wear behaviors of the PVD ZrN coated carbide in sliding wear tests and in machining processes. Wear. 2008, 264 (3-4): 298-307 Deng Jianxin, Wu Fengfang. Wear mechanisms of gradient ceramic nozzles in abrasive air-jet machining. International Journal of Machine Tool and Manufacture. 2007, 47 (12-13): 2031-2039 Deng Jianxin, Liu Lili, Ding Mingwei. Erosion wear behaviours of SiC/(W,Ti)C laminated ceramic nozzles in dry sand blasting processes. Materials Science Engineering A. 2007, 444 (1-2): 120-129 Deng Jianxin, Cao Tongkun, Ding Zeliang. Tribological behaviors of hot-pressed Al2O3/TiC ceramic composites with the additions of CaF2 solid lubricants. Journal of the European Ceramic Society. 2006, 26 (8): 1317-1323 Deng Jianxin, Ding Zeliang, Yuan Dongling. Erosion wear mechanisms of coal-water-slurry (CWS) ceramic nozzles in industry boilers. Materials Science Engineering A. 2006, 417 (1-2): 1-7 Deng Jianxin, Cao Tongkun. Self lubrication of sintered ceramic tools with CaF2 additions in dry cutting. International Journal of Machine Tool and Manufacture. 2006, 46 (9): 957-963 Deng Jianxin and Yang Xuefeng. Wear mechanisms of Al2O3/TiC/Mo/Ni ceramic wire-drawing dies. Materials Science Engineering A. 2006, 424 (1-2): 347-354 Deng Jianxin, Cao Tongkun, Liu Lili. Self-lubricating behaviors of Al2O3/TiB2 ceramic tools in dry high-speed machining of hardened steel. Journal of the European Ceramic Society. 2005, 25 (7): 1073-1079 Deng Jianxin, Liu Lili, Liu Jianhua. Failure mechanisms of TiB2 particle and SiC whisker reinforced Al2O3 ceramic cutting tools when machining nickel-based alloys. International Journal of Machine Tool and Manufacture. 2005, 45 (12-13): 1393-1401 Deng Jianxin. Erosion wear of boron carbide nozzles by abrasive air-jets. Materials Science Engineering A. 2005, 408 (1-2): 227-233 Deng Jianxin, Feng Yihua, Ding Zeliang. Wear behaviors of the ceramic nozzles in sand blasting treatments. Journal of the Euroepan Ceramic Society. 2003, 23 (2): 323-329 Deng Jianxin, Lee Taichiu. Ultrasonic machining of alumina based ceramic composites. Journal of the Euroepan Ceramic Society. 2002, 22 (8): 1235-1241 Deng Jianxin, Lee Taichiu. Effect of ultrasonic surface finishin g on thermal shock behaviour and the strength of EDMed ceramic composites. International Journal of Machine Tool and Manufacture. 2002, 42 (2): 245-250