近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Xu, Liang,Cheng, Gengdong.On the solutions to the Saint-Venant problem of heterogeneous beam-like structures with periodic microstructures[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2019,163
[2]孙国,阎琨,蔡贤辉,程耿东.采用包络-准则法优化考虑瞬态传热的薄板结构[J],计算力学学报,2018,35(6):744-749
[3]鲁一南,程耿东,刘晓峰.高柔风电塔残余振动控制优化设计[J],大连理工大学学报,2018,58(6):551-558
[4]Yan, Kun,Wang, Bo Ping,Cheng, Geng Dong.Residual vibration reduction for translation unconstrained or partially unconstrained structures by structural optimization[J],COMPUTERS & STRUCTURES,2018,210:12-27
[5]Hu, Qingyuan,Chouly, Franz,Hu, Ping,Cheng, Gengdong,Bordas, Stephane P. A..Skew-symmetric Nitsche's formulation in isogeometric analysis: Dirichlet and symmetry conditions, patch coupling and frictionless contact[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2018,341:188-220
[6]陈飙松,张力丹,鲁一南,程耿东.结构优化半解析灵敏度分析的改进算法[J],计算力学学报,2018,35(5):533-539
[7]Yan, Kun,Cheng, Geng Dong,Wang, Bo Ping.Topology optimization of damping layers in shell structures subject to impact loads for minimum residual vibration[J],JOURNAL OF SOUND AND VIBRATION,2018,431:226-247
[8]Xu, Liang,Cheng, Gengdong.Two-scale concurrent topology optimization with multiple micro materials based on principal stress orientation[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2018,57(5,SI):2093-2107
[9]Yan, Kun,Cheng, Gengdong.An adjoint method of sensitivity analysis for residual vibrations of structures subject to impacts[J],JOURNAL OF SOUND AND VIBRATION,2018,418:15-35
[10]Zhou, Ming,Luo, Zhifan,Yi, Ping,Cheng, Gengdong.A two-phase approach based on sequential approximation for reliability-based design optimization[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2018,57(2):489-508
[11]阎军,隋倩倩,程耿东.周期性点阵圆柱壳结构的多尺度分析及优化设计[A],Chinese Conference on Computational Mechanics in conjunction with International Symposium on Computational Mechanics′2018,2018
[12]Mo, Yihua,Cheng, Gengdong,Wang, Bing,Wang, Xiaohong.The effects of delamination deficiencies on compressive properties of composite grid-stiffened structures[J],MECHANICS OF ADVANCED MATERIALS AND STRUCTURES,2018,25(11):901-916
[13]陈祖煜,程耿东,杨春和.关于我国重大基础设施工程安全相关科研工作的思考[A],中国土木工程学会2017年学术年会,2017,14
[14]李玉韦,王博,程耿东.基于新型降阶模型的网格加筋圆柱壳频率分析[J],宇航总体技术,2017,01:41-48
[15]Xu, Liang,Cheng, Gengdong.Shear stiffness prediction of Reissner-Mindlin plates with periodic microstructures[J],MECHANICS OF ADVANCED MATERIALS AND STRUCTURES,2017,24(4):271-286
[16]程耿东,王博.The effects of delamination deficiencies on compressive properties of composite grid-stiffened structures.[J],Mechanics of Advanced Materials and Structures,2017,1-16
[17]阎琨,刘晓德,程耿东.组合结构的残余振动最小化结构优化设计[J],北京工业大学学报,2016,42(12):1775-1780
[18]程耿东,徐向东,刘晓峰.基于频率控制的多约束风电塔优化方法[J],大连理工大学学报,2016,56(6):551-560
[19]Zhou, Ming,Lewinski, Thomas,Maute, Kurt,Norato, Julian,Olhoff, Niels,Paulino, Glaucio H.,Sokol, Tomasz,Wang, Michael,Yang, Ren-Jye,Youn, Byeng Dong,Allaire, Gregoire,Cheng, Gengdong,Du, Jianbin,Gilbert, Matthew,Guo, Xu,Guest, James,Haftka, Raphael,Kim, Alicia.Special issue dedicated to Founding Editor George Rozvany[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(5,SI):1107-1111
[20]Cheng, Gengdong,Xu, Liang.Two-scale topology design optimization of stiffened or porous plate subject to out-of-plane buckling constraint[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(5,SI):1283-1296
[21]Guo X.,Cheng G.,Liu W.-K..Theory, methods and tools for additive manufacturing oriented design and optimization[A],Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016,2016,202399:35-51
[22]Guo X.,Cheng G.,Liu W.-K..Summary of group discussions[A],Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016,2016,202399:71-78
[23]Guo X.,Cheng G.,Liu W.-K..Computational and analytical methods in additive manufacturing[A],Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016,2016,202399:11-33
[24]Guo X.,Cheng G.,Liu W.-K..Additive manufacturing experimental methods and results, and additive manufacturing scalability[A],Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016,2016,202399:53-69
[25]Guo, Xu,Cheng, Gengdong,Liu, Wing-Kam.Report of the workshop predictive theoretical, computational and experimental approaches for additive manufacturing (WAM 2016)[A],Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016,2016,202399:1-88
[26]Guo, Xu,Cheng, Gengdong,Liu, Wing-Kam.Theoretical understanding of material science and mechanics in additive manufacturing[A],Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016,2016,202399:3-9
[27]Guo, Xu,Cheng, Gengdong,Liu, Wing-Kam.Introduction[A],Workshop on Predictive Theoretical, Computational and Experimental Approaches for Additive Manufacturing, WAM 2016,2016,202399:1-2
[28]易斯男,程耿东,徐亮.一维周期性梁结构等效性能计算方法讨论[J],计算力学学报,2016,33(5):704-710
[29]Zhou, Yiming,Haftka, Raphael T.,Cheng, Gengdong.Balancing diversity and performance in global optimization[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(4):1093-1105
[30]程耿东,林家浩.《悬索桥近似分析》的研究风格[J],计算力学学报,2016,33(4):494-494
[31]Wang, B. P.,Cheng, Gengdong.Can damping be ignored in transient structural dynamic optimization?[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(2):197-198
[32]Yi, Sinan,Cheng, Gengdong,Xu, Liang.Stiffness design of heterogeneous periodic beam by topology optimization with integration of commercial software[J],COMPUTERS & STRUCTURES,2016,172:71-80
[33]Xu, Liang,Cheng, Gengdong,Yi, Sinan.A new method of shear stiffness prediction of periodic Timoshenko beams[J],MECHANICS OF ADVANCED MATERIALS AND STRUCTURES,2016,23(6):670-680
[34]Yan, Jun,Guo, Xu,Cheng, Gengdong.Multi-scale concurrent material and structural design under mechanical and thermal loads[J],International-Union-of-Theoretical-and-Applied-Mechanics Symposium,2016,57(3,SI):437-446
[35]Yan, Kun,Cheng, Gengdong,Wang, Bo Ping.Topology optimization of plate structures subject to initial excitations for minimum dynamic performance index[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,53(3):623-633
[36]Yan, Kun,Cheng, Gengdong,Wang, Bo Ping.Adjoint methods of sensitivity analysis for Lyapunov equation[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,53(2):225-237
[37]Zhao, Jian,Cheng, Gengdong.An Innovative Surrogate-Based Searching Method for Reducing Warpage and Cycle Time in Injection Molding[J],ADVANCES IN POLYMER TECHNOLOGY,2016,35(3):288-297
[38]Zhao, Jian,Li, Hengyang,Cheng, Gengdong,Cai, Yuanwu.On predicting the effective elastic properties of polymer nanocomposites by novel numerical implementation of asymptotic homogenization method[J],COMPOSITE STRUCTURES,2016,135:297-305
[39]陈祖煜,程耿东,杨春和.关于我国重大基础设施工程安全相关科研工作的思考[J],土木工程学报,2016,49(3):1-5
[40]易斯男,程耿东.基于板壳均匀化新方法的蜂窝板结构宏微观协同优化设计[A],2015中国力学大会,2015,316-316
[41]周昳鸣,张君茹,周才华,王博,程耿东.汽车吸能管的多样性可竞争解优化设计[A],2015中国力学大会,2015,130-130
[42]周昳鸣,张君茹,程耿东.基于Kriging代理模型的两类全局优化算法比较[J],计算力学学报,2015,32(4):451-456
[43]Cheng, Gengdong,Yu, Na,Olhoff, Niels.Optimum design of thermally loaded beam-columns for maximum vibration frequency or buckling temperature[J],INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES,2015,66:20-34
[44]Yi, Sinan,Xu, Liang,Cheng, Gengdong,Cai, Yuanwu.FEM formulation of homogenization method for effective properties of periodic heterogeneous beam and size effect of basic cell in thickness direction[J],COMPUTERS & STRUCTURES,2015,156:1-11
[45]易斯男,王博,王立朋,程耿东.基于SimXpert实现ProE模型向CAE模型快速转化的模板开发[J],计算机辅助工程,2015,24(3):1-4
[46]阎琨,程耿东.惯性释放法在结构耐撞性拓扑优化中的应用和改进[J],计算力学学报,2015,32(3):293-300,338
[47]王文胜,程耿东,郝鹏.基于超梁降阶模型的蒙皮加筋圆柱壳频率分析[J],固体火箭技术,2015,38(3):401-406
[48]Zhao, Jian,Cheng, Gengdong,Ruan, Shilun,Li, Zheng.Multi-objective optimization design of injection molding process parameters based on the improved efficient global optimization algorithm and non-dominated sorting-based genetic algorithm[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,78(9-12):1813-1826
[49]Zhang, Jiaxin,Wang, Bo,Niu, Fei,Cheng, Gengdong.DESIGN OPTIMIZATION OF CONNECTION SECTION FOR CONCENTRATED FORCE DIFFUSION[J],MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES,2015,43(2):209-231
[50]倪晓琴,程耿东.热荷载作用下薄板的优化设计[J],应用数学和力学,2015,36(3):233-241
[51]Li, Rui,Ni, Xiaoqin,Cheng, Gengdong.Symplectic Superposition Method for Benchmark Flexure Solutions for Rectangular Thick Plates[J],JOURNAL OF ENGINEERING MECHANICS,2015,141(2)
[52]Liu Shutian,Li Quhao,Chen Wenjiong,Tong Liyong,Cheng Gengdong.An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures[J],机械工程前沿,2015,10(2):126-137
[53]Guo, Xu,Du, Zongliang,Cheng, Gengdong.A confirmation of a conjecture on the existence of symmetric optimal solution under multiple loads[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2014,50(4):659-661
[54]Yi, Ping,Cheng, Gengdong,Xu, Lin.Efficient algorithm for probability-based design optimisation of complex structures and related issues[J],STRUCTURE AND INFRASTRUCTURE ENGINEERING,2014,10(10,SI):1264-1275
[55]徐亮,程耿东.具有周期微结构Timoshenko梁剪切刚度的新数值求解方法[A],2014年中国计算力学大会,2014,1-2
[56]倪晓琴,程耿东.热荷载作用下薄板的优化设计[A],2014年中国计算力学大会,2014,1-2
[57]蔡园武,徐亮,程耿东.正六角形单胞周期性蜂窝板等效刚度研究[J],大连理工大学学报,2014,54(4):377-383
[58]倪长辉,阎军,程耿东,郭旭.频带约束下刚架结构优化问题可行域研究[J],大连理工大学学报,2014,54(4):384-390
[59]Ni, Changhui,Yan, Jun,Cheng, Gengdong,Guo, Xu.Integrated size and topology optimization of skeletal structures with exact frequency constraints[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2014,50(1):113-128
[60]Cheng, Gengdong,Wang, Wensheng.Fast Dynamic Analysis of Complicated Beam-Type Structure Based on Reduced Super Beam Model[J],AIAA JOURNAL,2014,52(5):952-963
[61]张家鑫,王博,牛飞,程耿东.分级型放射肋短壳结构集中力扩散优化设计[J],计算力学学报,2014,31(2):141-148,240
[62]Niu, Fei,Cheng, Gengdong.Analytic solutions of elastically supported Michell trusses[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2014,49(4):689-694
[63]刘晓峰,程耿东.基于自动分组遗传算法的建筑结构体系与构件尺寸协同优化设计[J],计算力学学报,2014,31(1):1-7
[64]倪长辉,阎军,程耿东,郭旭.受到频带约束的刚架结构优化问题的可行域[J],大连理工大学学报,2014,54(4):384-390
[65]李取浩,王文胜,程耿东.基于梁理论的复杂梁式结构低阶频率快速求解方法[J],工程力学,2014,31(11):1-8
[66]Cai, Yuanwu,Xu, Liang,Cheng, Gengdong.Novel numerical implementation of asymptotic homogenization method for periodic plate structures[J],INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES,2014,51(1):284-292
[67]郭旭,杜宗亮,程耿东.结构优化的对称性问题研究[A],2013中国力学大会,2013,255-255
[68]阎琨,程耿东.一种用于汽车耐撞性拓扑优化问题的混合法[A],2013中国力学大会,2013,256-256
[69]程耿东.结构拓扑优化的基本思想及其发展展望[A],2013中国力学大会,2013,1-1
[70]Zhou Y.-M.,Wang B.,Cheng G.-D..Shape optimization of pressure vessel head based on the super-ellipse equation[J],Journal of Harbin Institute of Technology (New Series),2013,20(4):52-62
[71]Cheng, Geng-Dong,Cai, Yuan-Wu,Xu, Liang.Novel implementation of homogenization method to predict effective properties of periodic materials[J],ACTA MECHANICA SINICA,2013,29(4):550-556
[72]Wang, Wensheng,Cheng, Gengdong,Li, Quhao.Fast dynamic performance optimization of complicated beam-type structures based on two new reduced physical models[J],ENGINEERING OPTIMIZATION,2013,45(7):835-850
[73]Guo, Xu,Du, Zongliang,Cheng, Gengdong,Ni, Changhui.Symmetry properties in structural optimization: some extensions[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2013,47(6):783-794
[74]Deng, Jiadong,Yan, Jun,Cheng, Gengdong.Multi-objective concurrent topology optimization of thermoelastic structures composed of homogeneous porous material[J],6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems,2013,47(4):583-597
[75]牛飞,梅帅,张盛,陈飙松,程耿东.基于SiPESC平台的拓扑优化模块开发及应用[J],大连理工大学学报,2013,53(2):162-168
[76]彭海军,王文胜,程耿东.基于物理降阶模型的桁架结构振动主动控制[J],工程力学,2013,30(12):1-7
[77]赵建,程耿东.数值模拟的共注射制品芯层厚度分布分析[A],中国计算力学大会2012,2012,1-5
[78]易斯男,蔡园武,王博,程耿东.基于均匀化方法的不连续点阵夹层结构等效力学性能预测[A],中国计算力学大会2012,2012,1-10
[79]Guo, Xu,Ni, Changhui,Cheng, Gengdong,Du, Zongliang.Some symmetry results for optimal solutions in structural optimization[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2012,46(5):631-645
[80]Kang, Zhan,Zhang, Xiaopeng,Jiang, Shigang,Cheng, Gengdong.On topology optimization of damping layer in shell structures under harmonic excitations[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2012,46(1):51-67
[81]Liu, Xiaofeng,Cheng, Gengdong,Yan, Jun,Jiang, Lei.Singular optimum topology of skeletal structures with frequency constraints by AGGA[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2012,45(3):451-466
[82]Luan, Yu,Guan, Zhen-Qun,Cheng, Geng-Dong,Liu, Song.A simplified nonlinear dynamic model for the analysis of pipe structures with bolted flange joints[J],JOURNAL OF SOUND AND VIBRATION,2012,331(2):325-344
[83]王文胜,程耿东,李取浩.基于梁平截面假设的复杂细长结构动力模型简化方法[J],计算力学学报,2012,29(3):295
[84]程耿东,王博.Optimum Design of Pile Foundation by Automatic GroupingGenetic Algorithms[J],ISRN Civil Engineering,2012,1(x):1-1
[85]邓佳东,程耿东.基于局部插值的结构动力模型降阶方法[J],力学学报,2012,44(2):342-350
[86]刘晓峰,程耿东.桩基础优化设计的模块化方法[J],计算力学学报,2012,29(4):487-493
[87]程耿东,于娜,王斌.热荷载下梁基频和热屈曲临界变温优化设计[J],大连理工大学学报,2012,52(6):781-786
[88]牛飞,王博,程耿东.基于拓扑优化技术的集中力扩散结构设计[J],力学学报,2012,44(3):528-536
[89]阎军,程耿东,郭旭.Singular phenomenon of integrated size and topology optimization of frame structures with exact frequency constraints[A],2012
[90]Xu, Shengli,Cheng, Gengdong.Optimum material design of minimum structural compliance under seepage constraint (vol 41, pg 575, 2010)[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2011,44(6):883-883
[91]Cheng, Gengdong,Liu, Xiaofeng.Discussion on symmetry of optimum topology design[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2011,44(5):713-717
[92]牛飞,张家鑫,王博,程耿东.基于拓扑优化技术的集中力扩散结构设计[A],2011,1-6
[93]王文胜,程耿东,李取浩.基于梁性质的复杂细长结构的减缩模型[A],2011,1-10
[94]于娜,程耿东.热荷载下梁的振动和稳定性分析及优化[A],2011,1-14
[95]邓佳东,程耿东.一种快速确定拓扑优化过滤策略中单元邻域的方法[A],2011,1-10
[96]Wang, Bin,Yan, Jun,Cheng, Gengdong.Optimal structure design with low thermal directional expansion and high stiffness[J],ENGINEERING OPTIMIZATION,2011,43(6):581-595
[97]阎军,邓佳东,程耿东.基于柔顺性与热变形双目标的多孔材料与结构几何多尺度优化设计[J],固体力学学报,2011,32(2):119-132
[98]Niu, Fei,Xu, Shengli,Cheng, Gengdong.A general formulation of structural topology optimization for maximizing structural stiffness[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2011,43(4):561-572
[99]关振群,宋洋,杨树华,刘万青,吕军,王鄢,程耿东.离心压缩机叶轮静强度分析方法[J],大连理工大学学报,2011,51(2):157-162
[100]关振群,程耿东.A simplified nonlinear dynamic model for the analysis of pipe structures with bolted flange joints[J],Journal of Sound and Vibration,2011,331(9):325-344
京公网安备 11010802027423号