Qin, Qinghua - The Australian National University - College of Engineering and Computer Science

个人简介

He received his BE degree in mechanical engineering from Xi'an Highway University (currently Chang An University), earning his Master of Science and PhD degrees from Huazhong University of Science and Technology (HUST). Both MS and PhD degrees are in applied mechanics. He joined the Department of Mechanics as an associate lecturer at HUST in 1984, and was promoted to lecturer of mechanics in 1987 during his PhD candidature period. After spending ten years lecturing at HUST, he was awarded a DAAD/K.C. Wong research fellowship in 1994, which enabled him to work at the University of Stuttgart in Germany for nine months. In 1995 he left HUST to take up a postdoctoral research fellowship at Tsinghua University, China, where he worked until 1997. He was awarded a Queen Elizabeth II fellowship in 1997 and a Professorial fellowship in 2002 at University of Sydney and stayed there till December 2003, both by the Australian Research Council, and is currently a Professor in the School of Engineering at the Australian National University, Australia. He has published over 300 journal papers and 8 authored books.

研究领域

Finite element method, boundary element method, Smart materials and structures, Fracture and damage mechanics, Composite materials, Biomechanics, Biomaterials, Solid mechanics, Engineering computation; Nanomechanics

近期论文

查看导师新发文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

He, J, Li, D, Jiang, W, Ke, L, Qin, G, Ye, Y, Qin QH, Qiu, D, 2019, 'The Martensitic Transformation and Mechanical Properties of Ti6Al4V Prepared via Selective Laser Melting', Materials, vol. 12, no. 2, 321. Wang, H & Qin QH, 2019, 'Thermal analysis of a functionally graded coating/substrate system using the approximated transfer approach', Coatings, vol. 9, no. 1, 51(17pp). Wang, H, Qin QH & Lee, C, 2019, 'n-sided polygonal hybrid finite elements with unified fundamental solution kernels for topology optimization', Applied Mathematical Modelling, vol. 66, no. February 2019, pp. 97-117. Wang, L, Cai, K, Xie, Y, Qin QH, 2019, 'Thermal shrinkage and stability of diamondene nanotubes', Nanotechnology, vol. 30, no. 7, 075702(11pp). Wu, p, Dong, J, Zhang, L, Qin QH, 2019, 'Benchmark solution for multilayer magneto-electro-elastic plates adhesively bonded by viscoelastic interlayer', Journal of Intelligent Material Sustems and Structures, vol. 30, no. 3, pp. 445-462. Yan, S, Zhou, H & Qin QH, 2019, 'Microstructure versus size: nano/microscale deformation of solute-strengthening Al alloys via pillar compression tests', Materials Research Letters, vol. 7, no. 2, pp. 53-59. Zhou, Y, Jiang, W, Feng, X, Li, D, Qin QH, Liu, X, 2019, 'In-plane compressive behavior of graphene-coated aluminum nano-honeycombs', Computational Materials Science, vol. 156, no. January 2019, pp. 396-403. Zhou, Y, Jiang, W, Li, D, Qin QH, 2019, 'Study on lightweight and strengthening effect of carbon nanotube in highly ordered nanoporous nickel: A molecular dynamics study', Applied Sciences, vol. 9, no. 2, 352. Duan, H, Shi, J, Cai, K, Qin QH, 2018, 'Thermal Vibration-Induced Rotation of Nano-Wheel: A Molecular Dynamics Study', International Journal of Molecular Sciences, vol. 19, no. 11, 3513. Li, J, Chen, W, Qin QH, Fu, J, 2018, 'A modified dual-level fast multipole boundary element method for large-scale three-dimensional potential problems', Computer Physics Communications, vol. 233, pp. 51-61. Wang, H, Qin QH, 2018, 'A Numerical Method for Analysing Heat Conduction in Composites Containing Encapsulated Phase Change Materials', 3rd International Conference on Design, Mechanical and Material Engineering, D2ME 2018, ed. R Das, EDP Sciences, TBC, pp. 7pp. Yan, S, Zhou, H, Xing, B, Zhang, S, Li, L, Qin QH, 2018, 'Crystal plasticity in fusion zone of a hybrid laser welded Al alloys joint: From nanoscale to macroscale', Materials and Design, vol. 160, pp. 313-324pp. Chai, Y, Li, R, Perriman, D, Chen, S, Qin QH, et al 2018, 'Laser polishing of thermoplastics fabricated using fused deposition modelling', International Journal of Advanced Manufacturing Technology, vol. 96, no. 9-12, pp. 4295-4302. Lee, C, Wang, H & Qin QH, 2018, 'Efficient hypersingular line and surface integrals direct evaluation by complex variable differentiation method', Applied Mathematics and Computation, vol. 316, pp. 256-281. Li, H, Luo, Z, Gao, L, Qin QH, 2018, 'Topology optimization for concurrent design of structures with multi-patch microstructures by level sets', Computer Methods in Applied Mechanics and Engineering, vol. 331, pp. 536-561. Zhang, X, Cai, K, Shi, J, Qin QH, 2018, 'Friction effect of stator in a multi-walled CNT-based rotation transmission system', Nanotechnology, vol. 29, no. 4, 045706. Kang, H, Hou, Z & Qin QH, 2018, 'Experimental study of time response of bending deformation of bone cantilevers in an electric field', Journal of the Mechanical Behavior of Biomedical Materials, vol. 77, pp. 192-198. Tong, Y, Bai, S, Hu, Y, Liang, X, Ye, Y, Qin QH, 2018, 'Laser ablation resistance and mechanism of Si-Zr alloyed melt infiltrated C/C-SiC composite', Ceramics International, vol. 44, no. 4, pp. 3692-3698. Cai, K, Shi, J, Min Xie, Y, Qin QH, 2018, 'A nano continuous variable transmission system from nanotubes', Nanotechnology, vol. 29, no. 7, 075707. Liu, B, Wang, H & Qin QH, 2018, 'Modelling and Characterization of Effective Thermal Conductivity of Single Hollow Glass Microsphere and Its Powder', Materials, vol. 11, no.1, 133. Lei, Y, Wang, H & Qin QH, 2018, 'Micromechanical properties of unidirectional composites filled with single and clustered shaped fibers', Journal of Environmental Chemical Engineering, vol. 25, no. 1, pp. 143-152.