近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
国际期刊：
2016-2019年
1.Guolin Lyu, Xuening Chu, Deyi Xue，Product modeling from knowledge, distributed computing and lifecycle perspectives: A literature review，Computers in Industry，84 (2017)， 1–13，2017
2.Hongzhan Ma, Xuening Chu∗, Deyi Xue, Dongping Chen，A systematic decision making approach for product conceptual design based on fuzzy morphological matrix， Expert Systems With Applications，81 (2017) 4 4 4–456，2017
3.Lei Zhang, Xuening Chu, Hansi Chen, Deyi Xue. Identification of performance requirements for design of smartphones based on analysis of the collected operating data. ASME Journal of Mechanical Design. 2017, 139(11): 111418-111421. (B类SCI)
4.Hongzhan Ma, Xuening Chu, Guolin Lyv, Deyi Xue. An integrated approach for design improvement based on analysis of time-dependent product usage data. ASME Journal of Mechanical Design, 139(11): 111401-111413. DOI: 10.1115/1.4037246. 2017 (B类SCI)
5.Hansi Chen, Lei Zhang, Xuening Chu. Performance Assessment of Product Modules Based on Usage Data Collected Through Embedded Sensors. The IEEE International Conference on Industrial Engineering and Engineering Management 2018. (EI)
6.Lei Zhang, Xuening Chu, Zhenlong Yuan. Product Platform Planning through Sensitivity Analysis and Improved QFD Approach. The IEEE International Conference on Industrial Engineering and Engineering Management 2018. (EI)
7.Hongzhan Ma, Xuening Chu, Weizhong Wang, Xinwang Liu, Deyi Xue. A directed failure causality network (DFCN) based method for function components risk prioritization under interval type-2 fuzzy environment. Advanced Engineering Informatics, 41: 100920. 2019 (B类SCI)
8.Hongzhan Ma, Xuening Chu, Deyi Xue, Dongping Chen. Identification of to-be-improved components for redesign of complex products and systems based on fuzzy QFD and FMEA. Journal of Intelligent Manufacturing, 30(2): 623-639. 2019 (SCI)
9.Hongzhan Ma, Xuening Chu, Yupeng Li. An integrated approach to identify function components for product redesign based on analysis of customer requirements and failure risk. Journal of intelligent and fuzzy systems. 36(2): 1743-1757. 2019. (SCI)
10.Lei Zhang, Xuening Chu, Hansi Chen, Bo Yan. A Data-Driven Approach for the Optimization of Product Specifications. International Journal of Production Research.2019, 57(3): 703-721. (B类SCI)
11.Lei Zhang, Xuening Chu, Deyi Xue. Identification of the to-be-improved product features based on online reviews for product redesign. International Journal of Production Research, 2019, 57(8): 2464-2479. (B类SCI)
12.Hansi Chen, Lei Zhang, Xuening Chu⁎, Bo Yan, Smartphone customer segmentation based on the usage pattern, Advanced Engineering Informatics, 2019, 42 (2019) 101000 (B类SCI)
13.Binbin Ma, Hongzhan Ma, Yupeng Li, Xuening Chu & Qingxiu Liu, Design improvement supporting method based on product performance analysis, International Journal of Computer Integrated Manufacturing, 2019, VOL. 32, NO. 10, 1009–1022(SCI)
14.Hang Liua, Xuening Chu, Deyi Xue, An optimal concurrent product design and service planning approach through simulation-based evaluation considering the whole product life-cycle span, Computers in Industry, 111 (2019) 187–197(B类SCI)
2013-2015年
1.Yupeng Li, Xuening Chu*, Dexin Chu and Qinming Liu, An integrated module partition approach for complex products and systems based on weighted complex networks,International Journal of Production Research, Volume 52, Issue 15, 4608–4622,2014（SCI:000340126000015，B类期刊）
2.Yupeng Li, Xuening Chu*, Dexin Chu, Xiuli Geng, Xiaosong Wu. An integrated approach to evaluate module partition schemes of complex products and systems based on interval-valued intuitionistic fuzzy sets [J]. International Journal of Computer Integrated Manufacturing,Volume 27, Issue 7, 675–689, 2014.（SCI:000335851200005）
3.Yupeng Li, Xuening Chu*,Dongping Chen, Qinming Liu,Jing Shen, An integrated module portfolio planning approach for complex products and systems, International Journal of Computer Integrated Manufacturing,Volume 28,No 9, 988–998, 2015.（SCI）
4.Jiaqi Huang,Yupeng Li,Xuening Chu*,Dexin Chu,An integrated top-down design process evaluation approach of complex products and systems based on hierarchical design structure matrix,International Journal of Computer Integrated Manufacturing,Volume 28,No 10, 1015–1029, 2015.（SCI）
5.Dongping Chen, Xuening Chu*, Xiwu Sun, Yupeng Li,Yuliang Su, An Information Axiom based decision making approach under hybrid uncertain environments,Information Sciences,Volume 312, 10 August 2015, Pages 25-39.（SCI, A 类期刊）
6.Dongping Chen, Xuening Chu*, Xiaoyang Yang, Xiwu Sun, Yupeng Li, Yuliang Su,PSS solution evaluation considering sustainability under hybrid uncertain environments, Expert Systems with Applications,Volume 42,No 14, 5822–5838, 2015（SCI，B类期刊）
7.Xiaosong Wu, Zaifang Zhang, Yuan Liu, Xuening Chu, Process parameter selection study on SiNx:H films by PECVD method for silicon solar cells, Solar Energy Volume: 111 Pages: 277-87, Jan. 2015（SCI，B类期刊）
8.Dongping Chen, Xuening Chu*, Xiwu Sun, Yupeng Li, A new product service system concept evaluation approach based on Information Axiom in a fuzzy-stochastic environment, International Journal of Computer Integrated Manufacturing,2015,Volume28,No11,1123-1141.（SCI）
9.Yuliang Su, Xuening Chu*, Dongping Chen, Xiwu Sun, Process planning optimization on turning machine tool using a hybrid genetic algorithm with local search approach, Advances in Mechanical Engineering , 2015, Volume 7, No 4, 1-14(SCI)
10.Yuliang Su, Xuening Chu, Dongping Chen, Xiwu Sun, A genetic algorithm for operation sequencing in CAPP using edge selection based encoding strategy, Journal of Intelligent Manufacturing, 12 June 2015, 20p
2012年以前
1.Xuening Chu，Hans Holm，Product Manufacturability Control for Concurrent Engineering, International Journal of Computers in Industry，Vol.24, No.1,1994:29-38（SCI，B类期刊）
2.Y.L. Tu，Xuening Chu，Computer Aided Process Planning in Virtual One-of a Kind Production, International Journal of Computers in Industry，Vol.41, No.2,2000:99-110（SCI，B类期刊）
3.Xuening Chu，S.K.Tso，Y.L.Tu，A Novel Methodology to Computer Aided Process Planning, International Journal of Advanced Manufacturing Technology，Vol.16，No.10，2000:714-719.（SCI）
4.Xuening Chu，S.K.Tso，W.J.Zhang，Q.Li，Partnership Synthesis for Virtual Enterprises，International Journal of Advanced Manufacturing Technology，Vol.19，No.5，2002: 384-391（SCI）
5.Zhai Wenbin，Xuening Chu，Zhang Jie，Ma Dengzhe，Jin Ye and Yan Juanqi，Research on AOCTPN-based modeling and simulation technology of semiconductor fabrication line，International Journal of Advanced Manufacturing Technology，Vol.29，No.5，2005:1433-3015（SCI）
6.Zaifang, Zhang, Xuening Chu, Fuzzy group decision-making for multi-format and multi-granularity linguistic judgments in quality function deployment, Expert systems with applications, Vol.36, No.5, 2009: 9150-9158（SCI，B类期刊）
7.Zaifang, Zhang, Xuening Chu, A new integrated decision-making approach for design alternative selection for supporting complex product development, International Journal of Computer Integrated Manufacturing Systems, Vol.22, No.3, 2009: 179-198.（SCI）
8.Xiuli Geng, Xuening Chu, Zaifang Zhang, A new integrated design concept evaluation approach based on vague sets, Expert systems with applications, Vol.37, Issue 9, 2010: 6629-6638（SCI，B类期刊）
9.Zaifang, Zhang, Xuening Chu, Aided analysis for quality function deployment with an Apriori-based data mining approach, International Journal of Computer Integrated Manufacturing Systems,Vol.23,No. 7,July 2010,673–686（SCI）
10.Zaifang, Zhang, Xuening Chu, A new approach for conceptual design of product and maintenance, International Journal of Computer Integrated Manufacturing Systems, Vol. 23, No. 7, July 2010, 603–618（SCI）
11.Xiwu Sun, Xuening Chu, Yuliang Su, Censhu Tang, A new directed graph approach for automated setup planning in CAPP , International Journal of Production Research, Volume 48, Issue 22 January 2010, pages 6583-6612（SCI，B类期刊）
12.Xiuli Geng, Xuening Chu, Deyi Xue, Zaifang Zhang, An integrated approach for rating engineering characteristics’ final importance in product-service system development, Computers & Industrial Engineering,Vol.59,Issue 4,2010,pages 585–594（SCI）
13.Xiuli Geng, Xuening Chu, Deyi Xue, Zaifang Zhang,A systematic decision-making approach for the optimal product–service system planning, Expert systems with applications, Vol.38, Issue 2, 2011:11849-11858 （SCI，B类期刊）
14.Zaifang, Zhang, Xuening Chu, Risk prioritization in failure mode and effects analysis under uncertainty, Expert systems with applications, Vol.38, Issue 1, 2011: 206-214（SCI，B类期刊）
15.Xiwu Sun, Xuening Chu, Deyi Xue Yuliang Su, Censhu Tang. An integrated setup/fixture planning approach for machining prismatic parts. International Journal of Production Research. 2012, 50(4): 1009-1027 （SCI，B类期刊）
16.Xuening Chu, Censhu Tang, Deyi Xue, Yuliang Su, Xiwu Sun. Identification of machining features based on available resources of cutting tools. International Journal of Production Research. 2012, 50(15): 4141-4157.（SCI，B类期刊）
17.Xiuli Geng, Xuening Chu, A new importance-performance analysis approach for customer satisfaction evaluation supporting PSS design, Expert systems with applications, Vol.39, No.1, 2012: 1492–1502（SCI，B类期刊）
18.Xiuli Geng, Xuening Chu. An association rule mining and maintaining approach in dynamic database for aiding product-service system conceptual design, International Journal of Advanced Manufacturing Technology, 2012 62:1-13（SCI:000307760400001，B类期刊）
19.Hui Cheng, Xuening Chu. A network-based assessment approach for change impacts on complex product. Journal of Intelligent Manufacturing. 2012,4(23), 1419-1431.(SCI)
20.Hui Cheng，Xuening Chu. Task assignment with multi-skilled employees and multiple modes for product development projects. International Journal of Advanced Manufacturing Technology. 2012, 1(61), 391-403. (SCI)
21. Cheng, H., Wu, X., Chu, Xuening*, System and method for streamlining the design processes,International Journal of Services Operations and Informatics,Volume 7, Issue 2-3, 2012, Pages 229-244(SCI)
国际会议：
1.Xuening Chu, S.K.Tso, W.J.Zhang, Q.Li, Partners selection for virtual enterprises, Proceedings of the World Congress on Intelligent Control and Automation (WCICA) 2000, pp. 164-168
2.Zaifang, Zhang, Xuening Chu, A selection model for multiple design schemes of complex product , Proceedings-Fourth International Conference on Fuzzy Systems and Knowledge Discovery, FSKD 2007 3, art. no. 4406285, pp. 483-487（EI）
3.Xiuli Geng, Xuening Chu, Deyi Xue, Zaifang Zhang. Prioritizing engineering characteristics of product-service system using analytic network process and data envelopment analysis, 2010, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Quebec, Canada, 2010
4.Yuanling Tan, Xuening Chu, Zaifang Zhang, Xiuli Geng, Customer Value Optimization in Product Service System Design, Proceedings of the 3rd CIRP International Conference on Industrial Product Service Systems, Technische University Braunschweig, Braunschweig, Germany, May 5th - 6th, 2011
5.Xiuli Geng, Xuening Chu,,A New PSS Conceptual Design Approach Driven by User Task Model, Proceedings of the 3rd CIRP International Conference on Industrial Product Service Systems, Technische University Braunschweig, Braunschweig, Germany, May 5th - 6th, 2011
6.Xiuli Geng, Xuening Chu, Yupeng Li. Review and research on Product Service System design methodology. The Institute of Industrial Engineers Asian Conference 2011, June 10th-12th, Shanghai, China.
7.Xiuli Geng & Xuening Chu. Research on customer value in PSS design for design driving and concept evaluating. Proceedings of the 4rd CIRP International Conference on Industrial Product Service Systems, Tokyo, Japan, November 8th-9th, 2012
8.Dongping Chen, Xuening Chu*, Yupeng Li,Applying platform design to improve product-service systems collaborative development，15th IFIP WG 5.5Working Conference on Virtual Enterprises, PRO-VE 2014; Amsterdam; Netherlands; 6 -8 October 2014，IFIP Advances in Information and Communication Technology，Volume 434, 2014, Pages 107-116
国内期刊：
1.孙习武, 褚学宁 ,张在房,苏於梁. 基于多色集合理论的定位基准选择推理技术. 计算机集成制造系统. 2007,13(12): 2463-2468.
2.张在房，褚学宁，面向生命周期的完整产品总体设计方案决策研究，计算机集成制造系统，2009年5月第15卷第5期，833-848
3.张在房，褚学宁，高健鹰,基于通用物料清单的完整产品总体设计方案配置研究,计算机集成制造系统,2009年3月第15卷第3期,417-424
4.张在房，褚学宁，程辉，基于模糊加权最小二乘的多粒度语言决策信息集成，上海交通大学学报，2009年9月第43卷第9期,1377-1382
5.孙习武，褚学宁，苏於梁，汤岑书，基于聚类分析法的装夹规划算法研究，计算机集成制造系统，2009年6月第15卷第6期,1179-1186
6.耿秀丽，褚学宁，基于故障因果链的故障模式与影响分析风险评估方法，计算机集成制造系统，2009年12月第15卷第12期,2473-2480
7.耿秀丽，褚学宁，张在房，基于顾客需求满足度的产品总体设计方案评价，上海交通大学学报，2009年12月第43卷第12期,1123-1129
8.汤岑书，褚学宁，孙习武，苏於梁，基于表面聚类优化的加工特征识别方法，上海交通大学学报,2009年11月第43卷第11期,1720-1724
9.葛 骅，褚学宁，张在房，产品/维修服务集成设计模型，计算机集成制造系统，2009年7月第15卷第7期，1262-1269
10.汤岑书, 褚学宁，基于切削成形能力模型的加工特征识别方法，计算机辅助设计与图形学学报，2010年10月第22卷第10期，1655-1663
11.汤岑书，褚学宁，孙习武，苏於梁,基于几何与公差信息的加工特征识别方法,计算机集成制造系统,2010年2月第16卷第2期,256-262
12.苏於梁，褚学宁，孙习武，汤岑书,基于改进遗传算法的车削加工中心工步排序与优化,农业机械学报,2010年8月第41卷第8期,216-222
13.耿秀丽，张在房，褚学宁,基于变精度粗糙集的产品配置规则提取及增量式更新,上海交通大学学报,2010年7月第44卷第7期,878-882
14.孙习武，褚学宁，苏於梁，陈东萍，储德新,薄壁盘套类零件的装夹规划算法,上海交通大学学报,2011年9月第45卷第9期,1315-1321。
15.谭远玲，褚学宁，张在房。基于粗糙集的改进重要度绩效分析法，计算机集成制造系统，2011年7月第17卷第7期，1655-1663。
16.谭远玲，褚学宁，张在房。基于改进重要度绩效分析法的服务属性决策，上海交通大学学报，2011年9月第45卷第9期,1281-1287。
17.耿秀丽，褚学宁，李玉鹏。动态关联规则挖掘辅助产品服务系统规划分析，中国科技论文在线，2011年7月第6卷第7期,512-518.
18.程辉，褚学宁，基于设计流水线的产品设计过程管理系统，计算机集成制造系统，2012年12月第18卷第12期，1655-1663
19.袁宝勋，褚学宁，李玉鹏，刘振华，耿秀丽，郭立杰，基于产品设计数据的装配序列定量化评价方法，计算机集成制造系统，2014年第20卷第4期，807-816
20.陈东萍，褚学宁，冯涛，李玉鹏，左冠丽，混合不确定条件下基于信息公理的产品服务系统方案评价，计算机集成制造系统，2014年第20卷第8期，2071-2078
21.左冠丽，褚学宁，陈东萍，李玉鹏，冯涛，基于直觉模糊信息公理的产品服务方案选优，计算机集成制造系统，2015年第21卷第3期，1-20
22.吕国林，褚学宁，储德新，沈靖，刘相振，自顶向下设计的多骨架建模方法，计算机辅助设计与图形学学报，2015年第27卷23期，548-558
23.马红占，褚学宁*，刘振华，李玉鹏，基于人因仿真分析的装配序列评价模型及应用，中国机械工程，2015，第26卷第5期，652-657（EI）
24.吴晓松，李玉鹏，褚学宁*，基于数字模拟的PECVD沉积氮化硅薄膜的工艺参数决策方法研究，真空科学与技术学报，2015，第35卷第3期，281-289（EI）
京公网安备 11010802027423号