当前位置: X-MOL首页全球导师 国内导师 › 罗先武

个人简介

教育背景 2000.10 — 2004.3,博士, (日本)九州工业大学机械工程系 1995.11 — 1996.6,交流研究生,(日本)九州工业大学机械工程系 1993.9 — 1997.3,硕士,清华大学水利水电工程系 1986.9 — 1991.7,本科,清华大学水利工程系 工作履历 2004.12 —今,清华大学能源与动力工程系(原热能工程系),副教授、教授 2000.1 — 2004.11,清华大学热能工程系,讲师 1997.4 — 1999.12,清华大学水利工程系,讲师 1991.8 — 1993.8,清华大学水利工程系,助教 学术兼职 中国电机工程学会第七届水电设备专业委员会委员 中国水力发电工程学会第二届小水电专业委员会委员 全国水机磨蚀试验研究中心第八届理事会理事 Journal of Hydrodynamics第八届编委会编委 奖励与荣誉 “Journal of Hydrodynamics”期刊2017年度高被引论文奖,2017.8 铁岭市科学技术(发明)一等奖,2017.6 “服务于高水平研究生培养的课程教改与实践”,2016年清华大学教育教学成果二等奖,2016.8 “Journal of Hydrodynamics”期刊2014年度高被引论文奖,2015.11 “空化湍流机理研究及其在水力机械中的应用与推广”,高等学校科学研究优秀成果奖科技进步二等奖,2015.2 “南水北调平原水库建设与渠道清淤关键技术”,山东省科学技术二等奖,2015.1 “高效渠道机械化清淤设备研制与应用研究”,山东省水利科学技术进步一等奖,2014.9 “高温高汽蚀性能流程泵关键技术及产业化”,浙江省科学技术一等奖,2013.5 “复杂空化流动的机理研究及其工程应用”,高等学校科学研究优秀成果奖科技进步二等奖,2013.1 “流体机械课程设计”多媒体课件,清华大学优秀教学软件二等奖,2012.12 “高效、静音的多级屏蔽泵”,第十四届中国国际工业博览会创新奖,2012.11 “新颖的无轴式超小型泵”,第十三届中国国际工业博览会高校展区一等奖,2011.11 清华大学优秀班(级)主任二等奖(个人奖),2011.9 在“流体机械课程设计”中拓展本科生工程素质的探索,2010年清华大学教学成果二等奖,2010.9 清华大学优秀工会积极分子(个人奖),2009.4 “250RII-62高温高压热水循环泵”,浙江省科学技术二等奖,2008.5 “X型固液离心泵研究与推广”,教育部科技进步二等奖,2000.1 “离心式渣浆泵的固液速度比设计研究”,北京市科技进步二等奖,1999.12 “100XG-D固液离心泵”,国家教育委员会科技进步二等奖,1998.1 “高效节能渣浆泵”,河北省人民政府突出贡献奖(个人奖),1998.10 “渣浆泵的磨损机理研究”,国家教育委员会科技进步三等奖,1997.1

研究领域

目前开展的研究方向: 1)水力机械(水轮机、泵、船舶螺旋桨,等)内部非定常空化湍流 2)鱼类友好型水力机械的相关基础科学问题 3)人工心脏及生物流体动力学 4)水力机械及系统的先进技术研发及工程应用 5)水能资源开发利用的评价体系研究

非定常空化、空蚀与磨损、人工心脏、生物流动力学、水能资源开发与运行评价

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Investigation on the effects of blade thickness for a centrifugal rotary blood pump JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY[1738-494X], Published 2023, Volume 37, Issue 2, Pages 767-778 ECMO氧合器血液流动数值模拟及损伤评估 工程热物理学报[0253-231X], Published 2023, Volume 44, Issue 4, Pages 977-986 Unstable flow characteristics in vaneless region with emphasis on the rotor-stator interaction for a pump turbine at pump mode using large runner blade lean RENEWABLE ENERGY[0960-1481], Published 2022, Volume 185, Pages 1343-1361 Pressure oscillations with ultra-low frequency induced by vortical flow inside Francis turbine draft tubes Sustainable Energy Technologies and Assessments[2213-1388], Published 2022, Volume 51, Future fluid machinery supporting "double-carbon" targets 支撑"双碳"目标的未来流体机械技术 Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2022, Volume 62, Issue 4, Pages 678-692 Advances in the development of Artificial Hearts in the Department of Energy and Power Engineering of Tsinghua University 清华大学能源与动力工程系人工心脏研究进展 Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2022, Volume 62, Issue 4, Pages 746-757 A case study: Sediment erosion in francis turbines operated at the san francisco hydropower plant in ecuador  Energies[1996-1073], Published 2022, Volume 15, Issue 1, Mode vortex and turbulence in ventilated cavitation over hydrofoils International Journal of Multiphase Flow[0301-9322], Published 2022, Volume 157, Airfoil optimization using a machine learning-based optimization algorithm Journal of Physics: Conference Series[1742-6588], Published 2022, Volume 2217, Issue 1, Cavitating flow investigation in low specific speed axial flow waterjet pumps Journal of Physics: Conference Series[1742-6588], Published 2022, Volume 2217, Issue 1, The development of a high-speed miniature pump with dynamic bearing Journal of Physics: Conference Series[1742-6588], Published 2022, Volume 2217, Issue 1, Investigation on the effect of forward skew angle blade on the hump characteristic in a mixed flow pump using modified partially averaged Navier-Stokes model  RENEWABLE ENERGY[0960-1481], Published 2021, Volume 170, Pages 118-132 Experimental and numerical investigations into flow features in an intake duct for the waterjet propulsion under mooring conditions  ACTA MECHANICA SINICA[0567-7718], Published 2021, Volume 37, Issue 5, Pages 826-843 Suppression of vortex rope oscillation and pressure vibrations in Francis turbine draft tube using various strategies JOURNAL OF HYDRODYNAMICS[1001-6058], Published 2021, Volume 33, Issue 3, Pages 534-545 Mechanism analyses of the unsteady vortical cavitation behaviors for a waterjet pump in a non-uniform inflow  OCEAN ENGINEERING[0029-8018], Published 2021, Volume 233, Space-time frequency spectra analyses of the unsteady cavitating vortical flows inside a mixed-flow pump  Ocean Engineering[0029-8018], Published 2021, Volume 238, Investigation on the impeller-diffuser interaction on the unstable flow in a mixed-flow pump using a modified partially averaged Navier-Stokes model Ocean Engineering[0029-8018], Published 2021, Volume 238, Numerical simulations of fish movement in axial pump using immersed boundary method 基于沉浸边界法的轴流泵内鱼体运动数值模拟 Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2021, Volume 40, Issue 7, Pages 95-104 Comparisons of vortical flow and cavitation inside a Francis turbine with different draft tubes IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2021, Volume 774, Issue 1, Numerical Investigation of Pressure Fluctuation and Cavitation inside a Francis Turbine Draft Tube with Air Admission through a Fin Journal of Physics: Conference Series[1742-6588], Published 2021, Volume 1909, Issue 1, Energy balance analysis for a canned motor pump used for heat supply system Journal of Physics: Conference Series[1742-6588], Published 2021, Volume 1909, Issue 1, Effects of operating condition on fish behavior and fish injury in an axial pump SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2021, Multi-objective optimization design of the flush-type intake duct for a waterjet propulsion system 平进口喷水推进器进水流道多目标优化设计 Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition)[1671-4512], Published 2021, Volume 49, Issue 10, Pages 109-114 Investigation of the correlation mechanism between cavitation rope behavior and pressure fluctuations in a hydraulic turbine Renewable Energy[0960-1481], Published 2020, Volume 147, Pages 1199-1208 Suppression of hump characteristic for a pump-turbine using leading-edge protuberance PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY[0957-6509], Published 2020, Volume 234, Issue 2, Pages 187-194 Experimental comparison of two different positive slopes in one single pump turbine Renewable Energy[0960-1481], Published 2020, Volume 154, Pages 1218-1228 Numerical modeling of unsteady cavitating flow over a hydrofoil with consideration of surface curvature Ocean Engineering[0029-8018], Published 2020, Volume 205, Numerical investigations of the energy performance and pressure fluctuations for a waterjet pump in a non-uniform inflow  Renewable Energy[0960-1481], Published 2020, Volume 153, Pages 1042-1052 Investigations into the unsteady internal flow characteristics for a waterjet propulsion system at different cruising speeds  Ocean Engineering[0029-8018], Published 2020, Volume 203, Instability analysis for a centrifugal pump with straight inlet pipe using partially averaged Navier-Stokes model  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY[0957-6509], Published 2020, Volume 235, Issue 2, Pages 211-226 Numerical Study of the Behaviors of Ventilated Supercavities in a Periodic Gust Flow  JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2020, Volume 142, Issue 6, Numerical analysis of unstable turbulent flows in a centrifugal pump impeller considering the curvature and rotation effect JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY[1738-494X], Published 2020, Volume 34, Issue 7, Pages 2869-2881 Estimation of the turbulent viscous shear stress in a centrifugal rotary blood pump by the large eddy particle image velocimetry method JOURNAL OF HYDRODYNAMICS[1001-6058], Published 2020, Volume 32, Issue 3, Pages 486-496 Modified partially averaged Navier-Stokes model for turbulent flow in passages with large curvature MODERN PHYSICS LETTERS B[0217-9849], Published 2020, Volume 34, Issue 23, Large eddy simulation coupled with immersed boundary method for turbulent flows over a backward facing step PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE[0954-4062], Published 2020, Volume 235, Issue 15, Pages 2705-2714 Effects of flow pattern on hydraulic performance and energy conversion characterisation in a centrifugal pump RENEWABLE ENERGY[0960-1481], Published 2020, Volume 151, Pages 475-487 Instability analysis under part-load conditions in centrifugal pump JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY[1738-494X], Published 2019, Volume 33, Issue 1, Pages 269-278 Unstable flow characteristics in a pump-turbine simulated by a modified Partially-Averaged Navier-Stokes method SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2019, Volume 62, Issue 3, Pages 406-416 Investigation of flow instability characteristics in a low specific speed centrifugal pump using a modified partially averaged Navier–Stokes model  Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy[0957-6509], Published 2019, Volume 233, Issue 7, Pages 834-848 Numerical simulation of instability characteristic in pump turbines Open Archives of the 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2016, Published 2019, Multi-objective optimization of the flush-type intake duct for a waterjet propulsion system  Ocean Engineering[0029-8018], Published 2019, Volume 187, Cavitating flow features in a water-jet pump under different upstream conditions Open Archives of the 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2016, Published 2019, Scale-Adaptive Simulation of Unsteady Cavitation Around a Naca66 Hydrofoil  APPLIED SCIENCES-BASEL[2076-3417], Published 2019, Volume 9, Issue 18, Investigation of the Flow Around a C-start Swimming Goldfish Using PIV Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics[0253-231X], Published 2019, Volume 40, Issue 11, Pages 2567-2573 Numerical investigation of an intake duct for a waterjet propulsion system using modified partially averaged Navier-Stokes method ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019, Published 2019, Volume 3A-2019, Numerical simulation of the cavitation micro-jet velocity and erosion on a plane-convex hydrofoil with semicylindrical obstacle IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2019, Volume 240, Issue 6, Pressure oscillation suppression by air admission in a Francis turbine draft tube IOP Conference Series: Earth and Environmental Science[1755-1307], Published 2019, Volume 240, Issue 2, Study of flow instability in a miniature centrifugal pump based on energy gradient method Journal of Applied Fluid Mechanics[1735-3572], Published 2019, Volume 12, Issue 3, Pages 701-713 空化水动力学非定常特性研究进展及展望 力学进展[1000-0992], Published 2019, Volume 49, Issue 00, Pages 428-479 Numerical analyses of ventilated cavitation over a 2-D NACA0015 hydrofoil using two turbulence modeling methods Journal of Hydrodynamics[1001-6058], Published 2018, Volume 30, Issue 2, Pages 345-356 Experimental and numerical study of ventilation cavitation around a NACA0015 hydrofoil with special emphasis on bubble evolution and air-vapor interactions ENGINEERING COMPUTATIONS[0264-4401], Published 2018, Volume 35, Issue 3, Pages 1528-1542 Experimental study of instability characteristics in pump turbines JOURNAL OF HYDRAULIC RESEARCH[0022-1686], Published 2018, Volume 56, Issue 6, Pages 871-876 Internal flow analysis in a two-channel pump used for salt transportation American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM[0888-8116], Published 2018, Volume 3, Particle-imaging velocimetry and pressure measurements of the turbulent flows inside the intake duct American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM[0888-8116], Published 2018, Volume 2, Turbulent Flows Over a Backward Facing Step Simulated Using a Modified Partially Averaged Navier-Stokes Model JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2017, Volume 139, Issue 4, Unsteady numerical analysis of the liquid-solid two-phase flow around a step using Eulerian-Lagrangian and the filter-based RANS method JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY[1738-494X], Published 2017, Volume 31, Issue 6, Pages 2781-2790 Numerical simulation of the transient cavitating turbulent flows around the Clark-Y hydrofoil using modified partially averaged Navier-Stokes method JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY[1738-494X], Published 2017, Volume 31, Issue 6, Pages 2849-2859 微重力下空间循环离心泵空化性能研究 载人航天[1674-5825], Published 2017, Issue 01, Pages 33-38 A feed-forward backpropagation neural network method for remaining useful life prediction of Francis turbines Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering[2369-8136], Published 2017, Unsteady vortical flow simulation in a Francis turbine with special emphasis on vortex rope behavior and pressure fluctuation alleviation Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy[0957-6509], Published 2017, Volume 231, Issue 3, Pages 215-226 Transient cavitating vortical flows around a hydrofoil using k-omega partially averaged Navier-Stokes model MODERN PHYSICS LETTERS B[0217-9849], Published 2016, Volume 30, Issue 1, Combined experimental observation and numerical simulation of the cloud cavitation with U-type flow structures on hydrofoils INTERNATIONAL JOURNAL OF MULTIPHASE FLOW[0301-9322], Published 2016, Volume 79, Pages 10-22 A review of cavitation in hydraulic machinery  JOURNAL OF HYDRODYNAMICS[1001-6058], Published 2016, Volume 28, Issue 3, Pages 335-358 不同叶轮结构的离心泵水力性能试验 工程热物理学报[0253-231X], Published 2015, Volume 36, Issue 3, Pages 509-512 Analysis of ventilated cavitation around a cylinder vehicle with nature cavitation using a new simulation method Science Bulletin[2095-9273], Published 2015, Volume 60, Issue 21, Pages 1833-1839 Cavitation shedding dynamics around a hydrofoil simulated using a filter-based density corrected model Science China Technological Sciences[1674-7321], Published 2015, Volume 58, Issue 5, Pages 864-869 Multi-objective optimization of a mixed-flow pump impeller using modified NSGA-II algorithm Science China Technological Sciences[1674-7321], Published 2015, Numerical investigation of cavitation-vortex interaction in a mixed-flow waterjet pump Journal of Mechanical Science and Technology[1738-494X], Published 2015, Volume 29, Issue 9, Pages 3707-3716 Large eddy simulation and theoretical investigations of the transient cavitating vortical flow structure around a naca66 hydrofoil  INTERNATIONAL JOURNAL OF MULTIPHASE FLOW[0301-9322], Published 2015, Volume 68, Pages 121-134 Numerical simulation and analysis of the internal flow in a Francis turbine with air admission  INTERNATIONAL SYMPOSIUM OF CAVITATION AND MULTIPHASE FLOW (ISCM 2014), PTS 1-6[1757-8981], Published 2015, Volume 72, Numerical evaluation of cavitation shedding structure around 3D Hydrofoil: Comparison of PANS, LES and RANS results with experiments  9TH INTERNATIONAL SYMPOSIUM ON CAVITATION (CAV2015)[1742-6588], Published 2015, Volume 656, RESEARCH ON FLUID TRANSMISSION PERFORMANCE OF PROPELLANT ACQUISITION VANE UNDER MICROGRAVITY ENVIRONMENT PROCEEDINGS OF THE ASME/JSME/KSME JOINT FLUIDS ENGINEERING CONFERENCE, 2015, VOL 1, Published 2015, Implicit large eddy simulation of unsteady cloud cavitation around a plane-convex hydrofoil  JOURNAL OF HYDRODYNAMICS[1001-6058], Published 2015, Volume 27, Issue 6, Pages 815-823 Experiment investigation on fluid transportation performance of propellant acquisition vanes in microgravity environment International Journal of Fluid Machinery and Systems, Published 2014, Volume 7, Issue 1, Pages 1-6 Cavitating flow simulation with mesh development using salome open source software 11th International Conference on Hydrodynamics, Published 2014, Influence of Guide Vane Shapes on Hydraulic Characteristics for Shaft-Extension Tubular Pump Turbine at Turbine Mode American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM[0888-8116], Published 2014, Volume 1B, Numerical simulation of cavitating flow over 2d hydrofoil using openfoam adapted for debian operating system with lxde based in kernel Gnu/Linux American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM[0888-8116], Published 2014, Volume 2, Numerical simulation of pressure vibrations in a francis turbine draft tube with air admission American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM[0888-8116], Published 2014, Volume 1B, 混流式水轮机涡带工况下两级动静干涉及其压力脉动传播特性分析 水力发电学报, Published 2014, Volume 33, Issue 1, Pages 191-196 超小型叶栅空化流场试验研究 农业机械学报[1000-1298], Published 2014, Issue 7, Unsteady cavitation characteristics and alleviation of pressure fluctuations around marine propellers with different skew angles Journal of Mechanical Science and Technology[1738-494X], Published 2014, Volume 28, Issue 4, Pages 1339-1348 Cavitation simulation with consideration of the viscous effect at large liquid temperature variation CHINESE PHYSICS LETTERS[0256-307X], Published 2014, Volume 31, Issue 8, Numerical investigation of three-dimensional cavitation evolution and excited pressure fluctuations around a twisted hydrofoil JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY[1738-494X], Published 2014, Volume 28, Issue 7, Pages 2659-2668 Numerical investigation of unsteady cavitation around a NACA 66 hydrofoil using OpenFOAM  27TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS (IAHR 2014), PTS 1-7[1755-1307], Published 2014, Volume 22, Numerical simulation of three dimensional cavitation shedding dynamics with special emphasis on cavitation-vortex interaction  OCEAN ENGINEERING[0029-8018], Published 2014, Volume 87, Pages 64-77 Numerical study of unsteady cavitation on 2D NACA0015 hydrofoil using free/open source software CHINESE SCIENCE BULLETIN[1001-6538], Published 2014, Volume 59, Issue 26, Pages 3276-3282 Experiment research of cavitating flow over mini cascade Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery[1000-1298], Published 2014, Volume 45, Issue 9, Pages 119-124 一种基于“健康和谐”理念的水能资源开发与运行管理评价指标体系 水力发电学报[1003-1243], Published 2013, Issue 2, Analysis of hydro power resource utilization for a tributary of Zishui River-Fuyishui river Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2013, Volume 53, Issue 2, Pages 184-189 Numerical analysis of unsteady cavitation shedding dynamics around NACA66 hydrofoil by large-eddy simulation  Materials Science and Engineering, Published 2013, Volume 52, Pages 62016 Cavitating flow investigation inside centrifugal impellers for a condensate pump 26TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS, PTS 1-7[1755-1307], Published 2013, Volume 15, Cavitation performance evaluation for a condensate pump  6TH INTERNATIONAL CONFERENCE ON PUMPS AND FANS WITH COMPRESSORS AND WIND TURBINES (ICPF2013)[1757-8981], Published 2013, Volume 52, Comparison of cavitation prediction for a centrifugal pump with or without volute casing JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY[1738-494X], Published 2013, Volume 27, Issue 6, Pages 1643-1648 Design optimization of flow channel and performance analysis for a new-type centrifugal blood pump  6TH INTERNATIONAL CONFERENCE ON PUMPS AND FANS WITH COMPRESSORS AND WIND TURBINES (ICPF2013)[1757-8981], Published 2013, Volume 52, Flow analysis in a vane-type surface tension propellant tank  6TH INTERNATIONAL CONFERENCE ON PUMPS AND FANS WITH COMPRESSORS AND WIND TURBINES (ICPF2013)[1757-8981], Published 2013, Volume 52, Numerical analysis of unsteady cavitating turbulent flow and shedding horse-shoe vortex structure around a twisted hydrofoil  INTERNATIONAL JOURNAL OF MULTIPHASE FLOW[0301-9322], Published 2013, Volume 51, Pages 33-43 Static characteristic analysis on a hydrodynamic bearing of a hydraulic suspended micropump  6TH INTERNATIONAL CONFERENCE ON PUMPS AND FANS WITH COMPRESSORS AND WIND TURBINES (ICPF2013)[1757-8981], Published 2013, Volume 52, Three-dimensional large eddy simulation and vorticity analysis of unsteady cavitating flow around a twisted hydrofoil JOURNAL OF HYDRODYNAMICS[1001-6058], Published 2013, Volume 25, Issue 4, Pages 510-519 李仙江流域水能资源开发与运行的初步评价 中国农村水利水电[1007-2284], Published 2012, Issue 5, Hysteresis phenomena in hydraulic measurement  IOP Conf. Ser.: Earth Environ. Sci., Published 2012, Volume 15, Pages 62048 A miniature pump with a fluid dynamic bearing SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2012, Volume 55, Issue 3, Pages 795-801 Cavitating flow over a mini hydrofoil CHINESE PHYSICS LETTERS[0256-307X], Published 2012, Volume 29, Issue 1, Experimental study of the pressure fluctuations in a pump turbine at large partial flow conditions CHINESE JOURNAL OF MECHANICAL ENGINEERING[1000-9345], Published 2012, Volume 25, Issue 6, Pages 1205-1209 Numerical analysis of cavitation evolution and excited pressure fluctuation around a propeller in non-uniform wake INTERNATIONAL JOURNAL OF MULTIPHASE FLOW[0301-9322], Published 2012, Volume 43, Pages 13-21 Numerical simulation of cavity shedding from a Three-Dimensional twisted hydrofoil and induced pressure fluctuation by Large-Eddy simulation JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2012, Volume 134, Issue 4, Partially-Averaged Navier-Stokes method with modified k-epsilon model for cavitating flow around a marine propeller in a non-uniform wake INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER[0017-9310], Published 2012, Volume 55, Issue 23-24, Pages 6582-6588 Unsteady cavitating flow around a hydrofoil simulated using the Partially-Averaged Navier-Stokes model CHINESE PHYSICS LETTERS[0256-307X], Published 2012, Volume 29, Issue 7, 海河流域水资源利用与管理探析 中国农村水利水电[1007-2284], Published 2011, Issue 1, 6-DOF numerical simulation of the vertical-axis water turbine ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011, Published 2011, Volume 1, Issue PARTS A, B, C, D, Pages 673-678 Experimental investigation and numerical simulation of the hydraulic performance of a centrifugal blood pump Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2011, Volume 51, Issue 4, Pages 499-502+507 Fluid dynamic forces acting on the rotor of a shaft-less miniature pump ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011, Published 2011, Volume 1, Issue PARTS A, B, C, D, Pages 13-18 Hydraulic design of a double suction blood pump Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2011, Volume 51, Issue 5, Pages 662-666 Hydro-energy zone model and its application to the middle reaches of Yangtze River Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2011, Volume 30, Issue 5, Pages 224-228 Numerical simulation of the positive-slope performance curve of a reversible hydro-turbine in pumping mode Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2011, Volume 30, Issue 3, Pages 175-179 Numerical simulations of cavitating flow in the inducer and primary impeller of a multi-stage vertical barrel pump Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2011, Volume 51, Issue 2, Pages 267-271 Numerical study of cavitating turbulent flow around propellers: Relationship of cavity volume evolution and pressure fluctuation ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011, Published 2011, Volume 1, Issue PARTS A, B, C, D, Pages 1731-1737 Scale effects on the cavitation development in fluid machinery ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011, Published 2011, Volume 1, Issue PARTS A, B, C, D, Pages 539-543 Development of micro downwind turbine generator having soft blades Journal of Fluid Science and Technology, Published 2011, Volume 6, Issue 3, Pages 313-321 一种径向叶片式离心泵的内部流动研究 工程热物理学报, Published 2011, Volume 32(S1), Pages 17-20 离心式双吸无轴微型泵内空化流动的数值预测 工程热物理学报, Published 2011, Volume 32(S1), Pages 57-60 离心泵叶轮进口上游流场研究 工程热物理学报, Published 2011, Volume 32(S1), Pages 33-36 转轮几何参数对水泵水轮机水力性能影响的几点体会 大电机技术, Published 2011, Volume 3, Pages 47-49 Unsteady numerical simulation of cavitating turbulent flow around a highly skewed model marine propeller JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME[0098-2202], Published 2011, Volume 133, Issue 1, 一种双吸式血液泵水力设计 清华大学学报(自然科学版)[1000-0054], Published 2011, Issue 5, 可逆式水轮机泵工况下驼峰现象的数值模拟 水力发电学报[1003-1243], Published 2011, Issue 3, 水能区划模型及其在长江中游地区的应用 水力发电学报[1003-1243], Published 2011, Issue 5, 离心式血液泵水力性能的实验及数值模拟 清华大学学报(自然科学版)[1000-0054], Published 2011, Issue 4, 立式多级筒袋泵诱导轮及首级叶轮内的空化流动模拟 清华大学学报(自然科学版)[1000-0054], Published 2011, Issue 2, 基于bvf流场诊断的高比转速离心泵叶轮优化 工程热物理学报[0253-231X], Published 2010, Issue 5, 热力学空化模型的改进及数值应用 工程热物理学报[0253-231X], Published 2010, Issue 10, 立式多级筒袋泵吸入装置的优化设计 排灌机械工程学报[1674-8530], Published 2010, Issue 1, 绕扭曲翼型三维非定常空泡脱落结构的数值分析 水动力学研究与进展A辑[1000-4874], Published 2010, Issue 2, Analysis of flow around the symmetrical vane section suitable for small tidal turbines Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2010, Volume 29, Issue 2, Pages 239-243 Cavitating flow simulation for high temperature water based on thermodynamic effects Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2010, Volume 50, Issue 2, Pages 262-265 Design optimization for suction structure of multi-stage vertical barrel pump Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering[1674-8530], Published 2010, Volume 28, Issue 1, Pages 1-6 Design optimization for a shaft-less double suction mini turbo pump 25th IAHR Symposium on Hydraulic Machinery and Systems, Published 2010, Numerical investigation of unsteady cavitating turbulent flow around a full scale marine propeller J Hydrodyn, Published 2010, Volume 22(5 SUPPL.1), Issue 5, Pages 705-710 A novel shaft-less double suction mini pump SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2010, Volume 53, Issue 1, Pages 105-110 A thermodynamic cavitation model for cavitating flow simulation in a wide range of water temperatures CHINESE PHYSICS LETTERS[0256-307X], Published 2010, Volume 27, Issue 1, A Three-Component model suitable for natural and ventilated cavitation CHINESE PHYSICS LETTERS[0256-307X], Published 2010, Volume 27, Issue 9, A transport equation model for simulating cavitation flows in miniature machines MODERN PHYSICS LETTERS B[0217-9849], Published 2010, Volume 24, Issue 13, Pages 1467-1470 An experimental study on self-output-control characteristics of micro downwind rotor with coning soft blades SCIENCE CHINA-TECHNOLOGICAL SCIENCES[1674-7321], Published 2010, Volume 53, Issue 1, Pages 100-104 Numerical and experimental study on unsteady shedding of partial cavitation MODERN PHYSICS LETTERS B[0217-9849], Published 2010, Volume 24, Issue 13, Pages 1441-1444 Numerical investigation of the ventilated cavitating flow around an UNDER-WATER vehicle based on a THREE-COMPONENT cavitation model JOURNAL OF HYDRODYNAMICS[1001-6058], Published 2010, Volume 22, Issue 6, Pages 753-759 小型潮流水轮机叶片对称翼型的流动特性分析 水力发电学报[1003-1243], Published 2010, Issue 2, 考虑热力学效应的高温水空化模拟 清华大学学报(自然科学版)[1000-0054], Published 2010, Issue 2, 肺动脉局部狭窄对血液流动的影响 清华大学学报(自然科学版)网络.预览[1000-0054], Published 2009, Issue 5, Modeling cavitating flow in high temperature water FEDSM2009, VOL 2, Published 2009, Pages 401-406 Numerical simulation of the unsteady flow in a HIGH-HEAD pump turbine and the runner improvement PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE -2008, VOL 1, PT A AND B, Published 2009, Pages 1115-1123 人工心脏发展中的关键技术 北京生物医学工程[1002-3208], Published 2008, Issue 1, 可逆式水轮机的数值模拟与性能分析 大电机技术[1000-3983], Published 2008, Issue 4, 泥沙输送系统中并联泵出口侧分叉接头的结构优化及流动计算 流体机械[1005-0329], Published 2008, Issue 4, 清淤用泥浆泵轮叶片的冲蚀磨损形貌分析 南水北调与水利科技[1672-1683], Published 2008, Issue 1, 大型泵站水泵吸水池中流动稳定性研究 南水北调与水利科技[1672-1683], Published 2008, Issue 1, Effect of impeller inlet geometry on centrifugal pump cavitation performance Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2008, Volume 48, Issue 5, Pages 836-839 Experimental research on the movement rule of solid particles in centrifugal pump Shuili Fadian Xuebao/Journal of Hydroelectric Engineering[1003-1243], Published 2008, Volume 27, Issue 6, Pages 168-172+167 Simulation of the Blood Flow for the Aorta with a Stenosis Proc. the 4th Intl. Symp. on Fluid Machinery and Fluid Engineering, Published 2008, Pages 221-226 人工心脏:打造永不停跳的“心” 科学时报, Published 2008, Pages 1&3 Abrasive erosion comparison for a ceramics and a high chrome cast iron applied in a slurry pump HIGH-PERFORMANCE CERAMICS V, PTS 1 AND 2[1013-9826], Published 2008, Volume 368-372, Pages 894-897 Impeller inlet geometry effect on performance Improvement for centrifugal pumps JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY[1738-494X], Published 2008, Volume 22, Issue 10, Pages 1971-1976 叶轮进口几何参数对离心泵空化性能的影响 清华大学学报(自然科学版)网络.预览[1000-0054], Published 2008, Issue 5, 离心泵内固体颗粒运动规律的实验研究 水力发电学报, Published 2008, Volume 27, Pages 168-172 偏置式垂直转子微小型泵内的黏性流动 清华大学学报(自然科学版)[1000-0054], Published 2007, Issue 5, Viscous flow field in a mini pump with an asymmetric axis Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2007, Volume 47, Issue 5, Pages 682-685 Erosive wear performance and mechanism of engineering ceramic materials High-Performance Ceramics IV, Pts 1-3[1013-9826], Published 2007, Volume 336-338, Pages 2462-2464 超小型泵中前盖板对传统叶轮水力性能的影响 清华大学学报(自然科学版)[1000-0054], Published 2006, Issue 8, 固液冲蚀材料表面冲击波纹的形成机理 清华大学学报(自然科学版)[1000-0054], Published 2006, Issue 8, 微型泵半开式离心叶轮的空化性能 清华大学学报(自然科学版)[1000-0054], Published 2006, Issue 8, 基于遗传算法的黄河疏浚系统优化计算 人民黄河[1000-1379], Published 2006, Issue 3, Cavitation in semi-open centrifugal impellers for a miniature pump Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2006, Volume 46, Issue 8, Pages 1451-1454 Influence of 3D Guide Vanes on the Channel Vortices in the Runner of a Francis Turbine Journal of Fluid Science and Technology, Published 2006, Volume 1, Issue 2, Pages 147-156 Three-dimensional turbulent simulation of the internal flow in a kaplan turbine 23rd IAHR Symposium, Published 2006, Pages 287 固液泵用金属材料和陶瓷材料的冲蚀磨损对比分析 Published 2006, 垂直轴潮流水轮机水力性能的数值模拟研究 第1届水力发电技术国际会议论文集, Published 2006, Pages 276~282 水力机械常用金属材料的冲蚀磨损实验 Published 2006, Parameter selection of fluid dynamic sealing for a submersible slurry pump PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 1, PTS A AND B, Published 2006, Pages 751-756 Research on the application of genetic algorithm in LONG-DISTANCE SOLID-LIQUID transportation pumping systems PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 1, PTS A AND B, Published 2006, Pages 587-590 Research on the field test of desilting and BANK-STRENGTHENING for the yellow river PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 2, Published 2006, Pages 941-945 Simulation of the flow condition near the intake of a pump sump PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 1, PTS A AND B, Published 2006, Pages 291-295 渣浆泵内的粒子成象测速实验研究 矿山机械[1001-3954], Published 2005, Issue 6, 叶片倾斜对微型泵水力性能的影响 清华大学学报(自然科学版)[1000-0054], Published 2005, Issue 5, Numerical simulation of 3D cavitating turbulent flow in Francis turbine Proceedings of the ASME Fluids Engineering Division Summer Conference - 2005, Vol 1, Pts A and B, Published 2005, Pages 1551-1556 Effect of blade lean on mini pump hydraulic performance Qinghua Daxue Xuebao/Journal of Tsinghua University[1000-0054], Published 2005, Volume 45, Issue 5, Pages 704-707 Effect of Front Shroud and Blade Lean of Mini Pump Impeller on its Cavitation Performance 22nd IAHR Symposium on Hydraulic Machinery and Systems, Published 2004, Effect of inlet condition on cavitation performance of a centrifugal impeller which has geometries suitable for a mini pump The Third International Symposium on Fluid Machinery and Fluid Engineering, Published 2004, The flow behavior upstream of the impeller inlet of mini turbo pumps The 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Published 2004, A study on the cavitation performance of a high-speed mini turbo pump 4th International Conference on Pumps and Fans, Published 2003, Cavitation performance of a centrifugal impeller suitable for a mini turbo-pump 5th International Symposium on Cavitation, Published 2003, Impeller inlet geometry for a mini turbo-pump 7th Asian International Conf on Fluid Machinery, Published 2003, ミニポンプ向き遠心羽根車のキャビテーション性能 日本機械学会九州支部第56期総会講演会, Published 2003, Opengl在泵内流场三维动态仿真中的应用 流体机械[1005-0329], Published 2001, Issue 4, 渣浆泵adi叶片的磨蚀特性分析 水力发电学报[1003-1243], Published 2001, Issue 1, 离心泵叶轮中颗粒轨迹与磨损的关系 水利电力机械[41-1150/TH], Published 2000, Issue 2, 离心泵叶轮内颗粒轨迹与磨损的关系 矿山机械[1001-3954], Published 1999, Issue 12, X型固液泵参数化结构cad系统 流体机械[1005-0329], Published 1999, Issue 2, 固液泵过流部件材质的使用现状 流体机械[1005-0329], Published 1999, Issue 4, 渣浆泵磨损试验台研制时应考虑的问题 流体机械[1005-0329], Published 1999, Issue 7, 氧化铝泵现场更新改造方案分析 冶金设备[1001-1269], Published 1999, Issue 1, 离心泵叶轮内磨损规律的试验研究 东北煤炭技术[1001-4128], Published 1998, Issue 1, 叶轮磨损过程中渣浆泵的性能变化 矿山机械[1001-3954], Published 1998, Issue 5,

推荐链接
down
wechat
bug