当前位置: X-MOL首页全球导师 国内导师 › 余祖元

个人简介

教育经历 1995.31998.3东京大学精密工学博士 1984.91987.6同济大学机械学硕士 1980.91984.7哈尔滨工业大学精仪学学士 工作经历 2007.1至今大连理工大学副教授 2006.92007.1大连理工大学讲师 2001.72006.9University of Nebraska-Lincola研究助教 1998.32001.7University of Nebraska-Lincola博士后 1989.61994.9大连理工大学助教、讲师 1987.61989.6同济大学助教

研究领域

特种加工技术,微细加工技术

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

[1]Li, Guodong,Natsu, Wataru,Yu, Zuyuan.Study on quantitative estimation of bubble behavior in micro hole drilling with EDM[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2019,146 [2]张从阳,邹日貌,余祖元.超声辅助等离子体中微细电火花加工技术研究[J],航空制造技术,2019,62(11):30-38 [3]虞慧岚,虞慧岚,李剑忠.A New Method of Electrode Wear Compensation in 3D Micro EDM,ASPEN 2009-3rd International Conference of Asian Society for Precision Engineering and Nanotechnology,2019 [4]Yu, Zuyuan,Li, Dongping,Yang, Junfeng,Zeng, Zhijie,Yang, Xiaolong,Li, Jianzhong.Fabrication of micro punching mold for micro complex shape part by micro EDM[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,100(1-4):743-749 [5]王晓航,余祖元,袁和传.电极摇动对电解加工微孔侧隙的影响研究[J],电加工与模具,2018,6:31-34,57 [6]王启建,余祖元,李剑中,佟宇.微细电火花混粉加工微孔初探[J],电加工与模具,2018,5:14-18,23 [7]雷森旺,周凯,余祖元,李剑中.工具摇动对超声波加工微孔深径比的影响[J],电加工与模具,2018,1:55-60 [8]Zou, Rimao,Yu, Zuyuan,Yan, Chengyang,Li, Jianzhong,Liu, Xin,Xu, Wenji.Micro electrical discharge machining in nitrogen plasma jet[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FORPRECISION ENGINEERING AND NANOTECHNOLOGY,2018,51:198-207 [9]Yang, Xiaolong,Zhou, Shining,Yu, Zuyuan,Li, Jianzhong,Zeng, Zhijie,Xing, Yingjie,Liu, Xin.Development of a new micro punching machine with micro male and female dies fabricated online (Retraction of) (vol 51, 2016) (Retraction of Vol 51, 2016)[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FORPRECISION ENGINEERING AND NANOTECHNOLOGY,2018,51:762-762 [10]Yan, Chengyang,Zou, Rimao,Yu, Zuyuan,Li, Jianzhong,Tsai, Yaoyang.Improving Machining Efficiency Methods of Micro EDM in Cold Plasma Jet[A],19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING,2018,68:547-552 [11]Zou, Rimao,Yu, Zuyuan,Yan, Chengyang,Li, Jianzhong,Qian, Jun.Study of Machining Characteristics of Micro EDM in Nitrogen Plasma Jet[A],19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING,2018,68:559-564 [12]Zeng, Zhijie,Li, Dongping,Yu, Zuyuan,Yang, Xiaolong,Li, Jianzhong,Kang, Renke.Study of Machining Accuracy of Micro Punching Mold Using Micro-EDM[A],19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING,2018,68:588-593 [13]邹日貌,晏成洋,殷国强,余祖元,李剑中,陈发泽.射流方向对大气压氮气冷等离子体射流中微细电火花加工特性的影响[A],特种加工技术智能化与精密化——第17届全国特种加工学术会议,2017,1 [14]雷森旺,周凯,余祖元,李剑中,赵福令.工具摇动对超声波加工微孔深径比的影响[A],特种加工技术智能化与精密化——第17届全国特种加工学术会议,2017,1 [15]袁和传,王晓航,陈创创,余祖元,李剑中.微细电解铣槽加工参数对微槽加工精度的影响[J],电加工与模具,2017,4:20-24 [16]晏成洋,邹日貌,余祖元,李剑中.冷等离子体射流中微细电火花加工特性研究[J],电加工与模具,2017,2:1-5 [17]曾志杰,李东坪,杨晓龙,余祖元,李剑中,徐文骥.基于微细电火花加工的微冲切实验研究[J],电加工与模具,2017,1:17-22 [18]李东坪,曾志杰,杨晓龙,余祖元,范恽,李剑中.基于微细电火花加工的微冲裁技术研究[J],航空制造技术,2017,3:40-45 [19]朱应宝,余祖元,李剑中,郭学杰,殷国强.电极摇动对微细电火花加工微孔深径比的影响[J],航空制造技术,2017,3:56-61 [20]李剑忠,余祖元.Study of Micro Punching Technology Based on Micro-EDM[A],2017 [21]余祖元.超音波振動援用放電加工技術のレビュー[J],電 気 加 工 学 会 誌,2017,51(127):343-347 [22]余祖元,李剑忠.Effects of Planetary Movement of Electrode on Aspect Ratio of Micro Hole Drilled by Micro-EDM[A],2017 [23]余祖元,李剑忠.Effects of Machining Parameters on Micro Hole Machining Accuracy in Micro-USM[A],2017 [24]Cheng H.L.,Li J.Z.,Xu S.H.,Yu Z.Y..Prediction of tool wear in pre-sintered ceramic body micro-milling[A],4th International Conference on Mechanical Engineering, Materials Science and Civil Engineering, ICMEMSCE 2016,2016,893 MSF:89-94 [25]雷森旺,余祖元,周凯,李剑中.工具摇动对超声波加工微孔深径比的影响[A],2016年全国超声加工技术研讨会,2016,7 [26]周凯,李国栋,雷森旺,余祖元,李剑中.加工参数对微细超声钻孔加工精度的影响[A],2016年全国超声加工技术研讨会,2016,6 [27]曾志杰,李东坪,杨晓龙,余祖元,李剑中,徐文骥.基于微细电火花加工的微冲切实验研究[A],2016年全国电火花成形加工技术研讨会,2016,8 [28]邹日貌,晏成洋,余祖元,李剑中,陈发泽.冷等离子体射流中微细电火花加工可行性研究[A],2016年全国电火花成形加工技术研讨会,2016,8 [29]Zou, Rimao,Yu, Zuyuan,Li, Wei,Guo, Meigang,Li, Jianzhong.Influence of porous structure on the machining performance of micro EDM[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2016,232:43-51 [30]Chen, Chuangchuang,Li, Jianzhong,Zhan, Shicheng,Yu, Zuyuan,Xu, Wenji.Study of micro groove machining by micro ECM[A],18th CIRP Conference on Electro Physical and Chemical Machining (ISEM),2016,42:418-422 [31]Li, Guodong,Yu, Zuyuan,Song, Jiawen,Li, Can,Li, Jianzhong,Natsu, Wataru.Material Removal Modes of Quartz Crystals by Micro USM[A],18th CIRP Conference on Electro Physical and Chemical Machining (ISEM),2016,42:842-846 [32]巩向伟,曾志杰,于腾龙,李剑中,徐文骥,余祖元.基于微细电火花加工技术的微冲裁模具在线制备[J],电加工与模具,2016,z1:23-28 [33]项得胜,王会,李剑中,虞慧岚,余祖元.分层厚度对微细电火花铣削加工模具及热压制品表面粗糙度的影响[J],电加工与模具,2016,1:10-16 [34]李剑忠,余祖元.Prediction of Tool Wear in Pre-sintered Ceramic Body Micro-milling[A],2016 [35]李剑忠,余祖元.A Tool Wear Model of Pre-sintered Ceramic Body Micro-milling[A],2016 [36]李剑忠,余祖元.Fabrication of Micro Punching Mold by Micro-EDM[A],2016 [37]李剑忠,余祖元.Influence of layer thickness on the surface quality of micro molds machined by micro EDM and hot embossed products[A],2016 [38]李剑忠,余祖元.Manufacturing method of machining three-Dimensional micro-features on Green Ceramic[A],2016 [39]李剑忠,余祖元.分层厚度对微细电火花铣削加工模具及热压制品粗糙度的影响[J],电加工与模具,2016,6:9-13 [40]Xu, Shuang-Hu,Li, Jian-Zhong,Yu, Zu-Yuan,Cheng, Hong-Lin.Influence Factors of Machining Three-dimensional Micro-features on Green Ceramic[A],International Conference on Mechanics Design, Manufacturing andAutomation (MDM),2016,8-14 [41]项得胜,王会,李剑中,虞慧岚,余祖元.分层厚度对微细电火花铣削加工模具及热压制品粗糙度的影响[A],第16届全国特种加工学术会议,2015,10 [42]巩向伟,曾志杰,于腾龙,李伟,李剑中,徐文骥,余祖元.基于微细电火花加工技术的微冲裁模具在线制备[A],第16届全国特种加工学术会议,2015,10 [43]于腾龙,余祖元,李伟,巩向伟,丁青旺,李剑中.微细电火花三维凹模加工中锥度问题的研究[J],电加工与模具,2015,3:12-15 [44]丁青旺,于腾龙,王会,余祖元,李剑中,刘汉月.微冲裁模具的微细电火花加工工艺研究[J],电加工与模具,2015,2:47-52,65 [45]李伟,余祖元,潘籽青,于腾龙,邹日貌,李剑中.电参数对电火花微深孔加工间隙的影响[J],电加工与模具,2015,2:1-3,12 [46]余祖元.Micro-Probe Fabrication Utilizing Abnormal Wear on Tool[A],2015 [47]余祖元,李剑忠.Relationship of surfaces of micro mold and embossed plastic part[A],2015,310-313 [48]李剑忠,余祖元.Micro-Drilling of Pre-Sintered Alumina Ceramic[A],2015,1120:27-31 [49]李剑忠,余祖元.Influences of Pre-Sintered Ceramic Compacts Processing Parameters on Tool Wear[A],2015,1121:32-37 [50]丁青旺,于腾龙,王会,余祖元,李剑中,刘汉月.微冲裁模具的微细电火花加工工艺研究[A],2014,106-118 [51]王会,余祖元,夏恒.微群孔成型过程中工具电极的径向损耗研究[A],2014,125-128 [52]宋家雯,汪涛,余祖元,李剑中,夏恒.微细超声波加工脆塑模式判别标准的讨论[J],电加工与模具,2014,2:51-54 [53]余祖元,李剑忠.Study of the Relationship between the Surface Quality of Hot-embossing Products and Micro-molds[A],2014,101-105 [54]余祖元,李剑忠.Study of Criterion of Material Removal Mode in Micro USM[A],2014,63-71 [55]余祖元,李剑忠.Influence of Porous Structure on the Machining Characteristics of Micro EDM[A],2014,29-34 [56]余祖元,李剑忠.Experimental Verification on Criterion of Material Removal Modes in Micro Ultrasonic Machining[A],2014,72-78 [57]余祖元,李剑忠.Electrochemical Micro-drilling by Rotational Tools with Direct-current Voltage[A],2014,44-48 [58]丁青旺,裴万生,詹士成,余祖元,李剑中,夏恒.超声波辅助振动工作液对微细电火花钻孔效率的影响[A],第15届全国特种加工学术会议论文集中国机械工程学会,2013,387-391 [59]宋家雯,汪涛,余祖元,李剑中,夏恒.关于微细超声波加工脆塑模式的判别标准的讨论[A],第15届全国特种加工学术会议,2013,336-339 [60]Li, J. Z.,Shen, F. H.,Yu, Z. Y.,Natsu, W..Influence of microstructure of alloy on the machining performance of micro EDM[J],8th Asian-European International Conference on Plasma SurfaceEngineering (AEPSE),2013,228(SUPPL.1):S460-S465 [61]Li, Jian-Zhong,Xiao, Lu,Wang, Hui,Yu, Hui-Lan,Yu, Zu-Yuan.Tool wear compensation in 3D micro EDM based on the scanned area[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FORPRECISION ENGINEERING AND NANOTECHNOLOGY,2013,37(3):753-757 [62]Pei, W.,Yu, Z.,Li, J.,Ma, C.,Xu, W.,Wang, X.,Natsu, W..Influence of abrasive particle movement in micro USM[A],17th CIRP Conference on Electro Physical and Chemical Machining (ISEM),2013,6:551-555 [63]余祖元,李剑忠.关于微细超声波加工脆塑模式判别标准的讨论[A],2013,336-339 [64]余祖元,李剑忠.Optimization of Planetary Movement Parameters for Micro Hole Drilling by Micro EDM[A],2013 [65]Li Jianzhong,Yin Guoqiang,Wang Cong,Guo Xuejie,Yu Zuyuan.Prediction of aspect ratio of a micro hole drilled by EDM[J],JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,2013,27(1):185-190 [66]郭学杰,裴万生,余祖元,李剑中.三轴机床微细异型电极加工与尺寸误差分析[J],电加工与模具,2012,5:21-23,28 [67]郭学杰,裴万生,余祖元,李剑中.三轴机床微细异型电极加工与尺寸误差分析[A],2012年全国电火花成形加工技术研讨会,2012,93-97 [68]Natsu, Wataru,Nakayama, Hisashi,Yu, Zuyuan.Improvement of ECM characteristics by applying ultrasonic vibration[J],INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING,2012,13(7):1131-1136 [69]秦少明,马春狮,王聪,余祖元,李剑中.微细超声加工中恒力控制问题的研究[J],电加工与模具,2012,2(3):41-44,65 [70]马春狮,秦少明,安成明,余祖元,李剑中.微细超声波加工工具损耗机理的实验研究[J],电加工与模具,2012,2:46-49 [71]王聪,吕忠伟,秦少明,李剑中,余祖元.电火花加工微孔深径比的理论模型实验研究[J],电加工与模具,2012,2:13-16 [72]余祖元.电火花加工微孔深径比的理论模型实验研究[J],电加工与模具,2012,2:13-16 [73]Li, Sha,Natsu, Wataru,Masaki, Takeshi,Yu, Zuyuan.Investigation on the influence of machining fluid on processing characteristics in micro-EDM[A],3rd International Conference on Manufacturing Science and Engineering(ICMSE 2012),2012,479-481:407-+ [74]Li, Jian-Zhong,Wu, Tao,Yu, Zu-Yuan,Zhang, Long,Chen, Guo-Qing,Guo, Dong-Ming.Micro machining of pre-sintered ceramic green body[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2012,212(3,SI):571-579 [75]李剑忠,张余升,栾纪杰,余祖元.微细电火花加工微孔时加工作用力影响[J],大连理工大学学报,2012,52(1):35-39 [76]余祖元.Investigation of Machining Characteristics of Ultrasonic Vibration Assisted ECM[A],2012,217(0):2555-2559 [77]余祖元,李剑忠.Effect of Different Microstructure of Materials on Micro-EDM[A],ICOMM 2012,2012,134-138 [78]余祖元.Ductile Mode Material Removal Model of Micro Rotary Ultrasonic Machining[A],2012,493-498 [79]李剑忠,余祖元,陈国清.Influence of Pre-sintering Temperature and Time on the Bending Strength of Alumina[A],2012,339-344 [80]Yu, Zuyuan,Ma, Chunshi,An, Chengming,Li, Jianzhong,Guo, Dongming.Prediction of tool wear in micro USM[J],CIRP ANNALS-MANUFACTURING TECHNOLOGY,2012,61(1):227-230

推荐链接
down
wechat
bug