近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
Yan Liu, Xingwu Zou, Dongping Duan, Lijie Luo, Siming Chen, Li Zhong, Nucleation and morphology of sodium molybdate dihydrate from NaOH solution, Journal of Crystal Growth, Volume 506, 15 January 2019, Pages 102-107
Zhaobin Ouyang, Zhancheng Guo, Dongping Duan, Xueping Song, and Xianpu Yu, Experimental Study of Coal Gasification Coupling with Natural Gas Autothermal Re-Forming for Synthesis Gas Production, Ind. Eng. Chem. Res. 2005, 44, 2, 279–284.
李大伟, 岳昌盛, 韩宏亮, 段东平, 以秸秆纤维废弃物为还原剂生产金属化球团, 环境工程,2016,2
李勇,段东平,刘艳. 粉煤灰碳热氯化的热力学分析, 重庆大学学报, 2015, 2, 130-137
Han, H., et al. “Recovery of Metallic Iron from High Phosphorus Oolitic Hematite by Carbothermic Reduction and Magnetic Separation.” Ironmaking & Steelmaking, vol. 42, no. 7, 2015, pp. 542–547.
Niu, Rui-long, et al. “Effect of Zr Content on Damping Property of Mg–Zr Binary Alloys.” Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol. 718, 2018, pp. 418–426.
Zhang, Yabing, et al. “Single-Step Hydrothermal Synthesis of Strontium Titanate Nanoparticles from Crystalline Anatase Titanium Dioxide.” Ceramics International, vol. 41, no. 10, 2015, pp. 13516–13524.
Han, Hongliang, et al. “Innovative Method for Separating Phosphorus and Iron from High-Phosphorus Oolitic Hematite by Iron Nugget Process.” Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, vol. 45, no. 5, 2014, pp. 1634–1643.
Yang, Xue-Min, et al. “Critical Evaluation of Prediction Models for Phosphorus Partition between CaO-Based Slags and Iron-Based Melts during Dephosphorization Processes.” Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, vol. 47, no. 4, 2016, pp. 2302–2329.
Yang, Xue-min, et al. “A Thermodynamic Model for Predicting Phosphorus Partition between CaO-Based Slags and Hot Metal during Hot Metal Dephosphorization Pretreatment Process Based on the Ion and Molecule Coexistence Theory.” Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, vol. 47, no. 4, 2016, pp. 2279–2301.
Zhang, Yabing, et al. “A Single-Step Direct Hydrothermal Synthesis of SrTiO3 Nanoparticles from Crystalline P25 TiO2 Powders.” Journal of Materials Science, vol. 51, no. 2, 2016, pp. 1142–1152.
Yang, Xue-min, et al. “Critical Assessment of P2O5 Activity Coefficients in CaO-Based Slags during Dephosphorization Process of Iron-Based Melts.” Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, vol. 47, no. 4, 2016, pp. 2330–2346.
Niu, Rui-long, et al. “Effect of Yttrium Addition on Microstructures, Damping Properties and Mechanical Properties of as-Cast Mg−based Ternary Alloys.” Journal of Alloys and Compounds, vol. 785, 2019, pp. 1270–1278.
Han, Hongliang, et al. “Mechanism and Influencing Factors of Iron Nuggets Forming in Rotary Hearth Furnace Process at Lower Temperature.” Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, vol. 46, no. 5, 2015, pp. 2208–2217.
Chen, Si-ming, et al. Research on the Carbothermic Reduction Procedure of SrSO 4 with Carbon. 2019, pp. 201–211.
杨学民, et al. “Critical Assessment of Three Kinds of Activity Coefficients of Carbon and Related Mixing Thermodynamic Functions of Fe–C Binary Melts Based on Atom–molecule Coexistence Theory.” Journal of Iron and Steel Research International, vol. 25, no. 2, 2018, pp. 181–199.
Chen, Ning, et al. “Mechanochemistry Synthesis of High Purity Lithium Carbonate.” Korean Journal of Chemical Engineering, vol. 34, no. 10, 2017, pp. 2748–2755.
Yang, Xue-min, et al. “Thermodynamic Evaluation of Reaction Abilities of Structural Units in Fe–C Binary Melts Based on Atom–molecule Coexistence Theory.” Journal of Iron and Steel Research International, vol. 25, no. 1, 2018, pp. 37–56.
Yang, Xue-min, et al. “Critical Assessment of Mixing Thermodynamic Functions of Fe–Al Binary Melts Based on Atom–molecule Coexistence Theory.” Journal of Iron and Steel Research International, vol. 27, no. 3, 2020, pp. 266–281.
Chen, Si-ming, et al. “High Efficient Sr/S Isolation for Preparing Sr(OH) 2 from Celestite (SrSO 4 ) in Alkaline Solution.” Journal of Central South University, vol. 26, no. 1, 2019, pp. 219–228.
Liu, Yan, et al. “Binders and the Bonding Mechanism of Fly Ash and Coke Pelletization.” International Journal of Coal Preparation and Utilization, vol. 39, no. 3, 2019, pp. 159–168.
Yang, Xue-min, et al. “Critical Assessment of Activities of Structural Units in Fe–Al Binary Melts Based on the Atom and Molecule Coexistence Theory.” High Temperature Materials and Processes, vol. 37, 2018, pp. 815–848.
Wang, Yun-si, et al. “Damping Capacities of Porous Mg–based Ternary Alloys Prepared by a Stir–casting Method.” ChemistrySelect, vol. 3, no. 22, 2018, pp. 6073–6080.
Han, Hongliang, et al. “Exploration of Straw Fiber as Reducing Agent Utilization in Rotary Hearth Furnace Process for Direct Reduced Iron Production.” Steel Research International, vol. 86, no. 11, 2015, pp. 1361–1369.
Han, H., et al. “Biomass Reducing Agent Utilisation in Rotary Hearth Furnace Process for DRI Production.” Ironmaking & Steelmaking, vol. 42, no. 8, 2015, pp. 579–584.
Liu, Yan, and Dongping Duan. “Phase Diagram for the Na2O–PbO–H2O System at 130 °C.” Asia-Pacific Journal of Chemical Engineering, vol. 12, no. 3, 2017, pp. 511–514.
Yuan, Peng, et al. “Impact on the Reduction Process of Carbon Containing Pellets with Biomass Replacing Traditional Reducing Agent.” Advanced Materials Research, 2015, pp. 1302–1307.
Duan, Dongping, et al. “Experiment Research on Direct Reduction of Celestine by Rotary Hearth Furnace Process.” 7th International Symposium on High-Temperature Metallurgical Processing, 2016, pp. 297–302.
Yang, Xue-min, et al. “A Further Evaluation of the Coupling Relationship between Dephosphorization and Desulfurization Abilities or Potentials for CaO-Based Slags: Influence of Slag Chemical Composition.” Metals, vol. 8, no. 12, 2018, p. 1083.
Li, Yong, et al. “Reaction Thermodynamics of Al2O3, Fe2O3, and SiO2 during Carbochlorination Process.” Chemistry Letters, vol. 46, no. 5, 2017, p. 777.
Chen, Tian-hua, et al. “Controllable Synthesis of Homogeneous Mesoporous Alumina by Reaction Crystallization.” Chemistry Letters, vol. 45, no. 7, 2016, pp. 807–809.
Zhang, Yi, et al. Controllable Synthesis of Sandy Mesoporus Alumina Material for Purification of Fluorine Flue Gas. 2015.
Wang, Yun-si, et al. “Investigation on Damping Capacities of Spherical Mg2Si Magnesium Matrix Composites Prepared by Super-Gravity Method.” MATEC Web of Conferences, vol. 207, 2018, p. 3019.
Wang, Yun-si, et al. “Investigation on Damping Capacities of Spherical Mg2Si Magnesium Matrix Composites Prepared by Super-Gravity Method.” MATEC Web of Conferences, vol. 207, 2018, p. 3019.