近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Liu D, Zhang HW@, Li YX, Chen X, Liu Y. Effects of Composition and Growth Rate on the Microstructure Transformation of β-Rods / Lamellae / α-Rods in Directionally Solidified Mg-Li Alloy. Materials & Design, 2017, 119: 199-207. (SCI, EI)
Du M1, Zhang HW1, Li YX, Liu Y, Chen X, He Y, Cheng Y. Fabrication of a Hierarchical Trimodal Structure with Nano-Cellular Cu2O, Nano-Porous Cu and Micro-Porous Gasar Cu. Materials Letters, 2016, 164: 583-586. (SCI, EI)
Du M1, Zhang HW1, Li YX, Liu Y, Chen X, He Y. Synthesis of a Bimodal Porous Cu with Nanopores on the Inner Surface of Gasar Pores: Influences of Preparation Conditions. Applied Surface Science, 2016, 360: 148-156. (SCI, EI)
Zhang HW, Li YX, Liu Y, Chen X, Chen LT, He Y, Du M. Heat Transfer Performance of Directional Solidified Gasar Cu Heat Sink. MetFoam 2015, 31 Aug. - 2 Sept. 2015, Barcelona, Spain. Poster.
Du M, Zhang HW, Li YX, Liu Y, Chen X, He Y. Fabrication and Wettability of Monolithic Bimodal Porous Cu with Gasar Macro-Pores and Dealloying Nano-Pores. Applied Surface Science, 2015, 353: 804-810. (SCI, EI)
Du M, Zhang HW@, Li YX@, Liu Y, Chen X, He Y. Depositing and Alloying on the Inner Surface of Gasar Cu Pores by Plating and Annealing Treatment. Applied Surface Science, 2015, 342: 69-75. (SCI, EI)
Liu Y, Zhang HW, Li YX. Effect of Melt Superheat on Structural Uniformity of Lotus-Type Porous Metals Prepared by Unidirectional Solidification. Transactions of Nonferrous Metals Society of China, 2015, 25(3): 1004-1010. (SCI, EI)
Du M, Zhang HW, Li YX. Inner Surface Alloying on Pores of Lotus-Type Porous Copper through Electroless Plating with Supersonic Vibration and Annealing Treatment. Surface and Coatings Technology, 2015, 261: 1-6. (SCI, EI)
陈刘涛, 张华伟, 刘源, 李言祥. 定向凝固多孔铜热沉传热性能的分段强化. 清华大学学报(自然科学版 ), 2014, 54(9): 1250-1254. (CSCD)
Zhang XM, Zhang HW, Li YX. Hybrid Porous Metal of Nano-Micro Double Size and Regular-Random Bimodal. TMS 2014, 16-20 February 2014, San Diego, California, USA. Poster. EPD Congress 2014, 2014, : 367-374. (EI)
Chen LT, Zhang HW, Liu Y, Li YX. Simulation on Heat Transfer Performance of Directionally Solidified Porous Copper Heat Sink. ICAMMS 2012 (International Conference on Advanced Material and Manufacturing Science), Dec. 20-21, 2012, Beijing, China. Advanced Materials Research, 2014, 875-877: 1095-1100. (ISTP, EI)
Zhang HW, Chen LT, Liu Y, Li YX. Experimental Study on Heat Transfer Performance of Lotus-Type Porous Copper Heat Sink. International Journal of Heat and Mass Transfer, 2013, 56(1-2): 172-180. (SCI, EI)
陈刘涛, 张华伟, 刘源, 李言祥. 定向凝固多孔Cu热沉传热性能的理论分析. 金属学报, 2012, 48(11): 1374-1380. (SCI, EI)
陈刘涛, 张华伟, 刘源, 李言祥. 定向凝固多孔Cu热沉传热性能的实验研究. 金属学报, 2012, 48(3): 329-333. (SCI, EI)
Tzamtzis S, Zhang HW, Xia MX, Babu N Hari, Fan ZY. Recycling of High Grade Die Casting AM Series Magnesium Scrap with the Melt Conditioned High Pressure Die Casting (MC-HPDC) Process. Materials Science and Engineering A, 2011, 528(6): 2664-2669. (SCI, EI)
Liang SM, Zhang HW, Xia MX, Chen RS, Han EH, Fan ZY. Microstructure and Mechanical Properties of Melt-Conditioned High-Pressure Die-Cast Mg-Al-Ca Alloy. Transactions of Nonferrous Metals Society of China, 2010, 20(7): 1205-1211. (SCI, EI)
Tzamtzis S, Zhang HW, Babu N Hari, Fan ZY. Microstructural Refinement of AZ91D Die-cast Alloy by Intensive Shearing. Materials Science and Engineering A, 2010, 527(12): 2929-2934. (SCI, EI)
Tzamtzis S, Zhang HW, Liu GJ, Wang Y, Babu N Hari, Fan ZY. Melt Conditioned High Pressure Die Casting (MC-HPDC) of Mg-Alloys. In: EricNyberg, Sean Agnew, Neale Neelameggham, and Mihriban Pekguleryuz, eds. Magnesium Technology 2009, Proceedings of the 2009 TMS Annual Meeting & Exhibition. 15-19 February, 2009, San Francisco, USA: TMS (The Minerals, Metals & Materials Society), 2009, : 91-96.
Patel JB, Zhang HW, Liu GJ, Fan ZY. Melt Conditioned High Pressure Die Casting (MC-HPDC) Process for High Quality Aluminium Components. In: Jürgen Hirsch, Birgit Skrotzki and Günter Gottstein, eds. Aluminium Alloys - Their Physical and Mechanical Properties, Proceedings of the 11th International Conference on Aluminium Alloys (ICAA11). 22-26 September, 2008, Aachen, Germany: DGM (Deutsche Gesellschaft für Materialkunde e.V.), 2008, : 510-516.
Zhang HW, Cao LJ, Bian Z, I. Bayandorian, Fan ZY. Melt Conditioned Twin Roll Casting (MC-TRC) Process for Wrought Aluminium Alloy Strips. In: Jürgen Hirsch, Birgit Skrotzki and Günter Gottstein, eds. Aluminium Alloys - Their Physical and Mechanical Properties, Proceedings of the 11th International Conference on Aluminium Alloys (ICAA11). 22-26 September, 2008, Aachen, Germany: DGM (Deutsche Gesellschaft für Materialkunde e.V.), 2008, : 421-426.
Li YX, Zhang HW, Liu Y. Directional Solidification of Metal-Gas Eutectics for Fabrication of Aligned Porous Metals. In: Lefebvre L P, Banhart J, Dunand D, eds. MetFoam 2007-Proceedings of the 5th International Conference on Porous Metals and Metallic Foams. 5-7 September, 2007, Montreal, Canada: DEStech Publications, Inc., 2008, : 209-212. (ISTP, EI)
张华伟, 李言祥. 金属熔体中气泡形核的理论分析. 物理学报, 2007, 56(8): 544-551. (SCI, EI)
张华伟, 李言祥, 刘源. 固/气共晶定向凝固中的工艺判据. 金属学报, 2007, 43(6): 589-594. (SCI, EI)
张华伟, 李言祥, 刘源. 氢在Gasar工艺常用纯金属中的溶解度. 金属学报, 2007, 43(2): 113-118. (SCI, EI)
张华伟, 李言祥, 刘源. Al-H系定向凝固制备多孔Al. 金属学报, 2007, 43(1): 11-16. (SCI, EI)
张华伟, 李言祥, 刘源. Gasar 工艺获得均匀藕状多孔结构的气压选择. 金属学报, 2006, 42(11): 1171-1176. (SCI, EI)
张华伟, 李言祥, 刘源. 藕状规则多孔Cu气孔率的理论预测. 金属学报, 2006, 42(11): 1165-1170. (SCI, EI)
张华伟, 李言祥, 刘源. Gasar 工艺下难以制得藕状多孔Al的原因分析. 见: 中国材料研究学会, 编. 2006年材料科学与工程新进展. 北京: 化学工业出版社, 2007, : 572-576.
Liu Y, Zhang HW, Chen X, Li YX. Directional Solidification of Metal-Gas Eutectic and Fabrication of Regular Porous Metals. China Foundry, 2005, 2(3): 184-187. （获2006 年中国机械工程学会铸造专业优秀论文银奖）
张华伟, 李言祥, 刘源. Gasar 工艺中金属-氢二元相图的研究. 金属学报, 2005, 41(1): 55-59. (SCI, EI)
刘源, 李言祥, 张华伟. 藕状多孔金属Mg的Gasar工艺制备. 金属学报, 2004, 40(11): 1121-1126. (SCI, EI)
李言祥, 刘源, 张华伟. GASAR和Gasarite研究进展. 特种铸造及有色合金, 2004, 136(1): 9-11. (CSCD)
京公网安备 11010802027423号