研究领域
1. 新一代钢铁材料的轧制工艺与组织性能控制;
2. 汽车用先进高强板及深冲板的研究开发与成形技术;
3. 热轧高强韧板带材及型材轧制工艺及品种开发;
4. 薄板坯连铸连轧工艺技术及新产品开发;
5. 金属材料成形过程数值模拟与组织性能预报金属材料;
6. 新一代钢铁材料加工过程组织性能控制与模拟
近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
Yonglin Kang,Hao Yu,Jie Fu, Kelu Wang, et al. Morphology and Precipitation Kinetics of AlN in Hot Strip of Low Carbon Steel Produced by Compact strip Production. Materials Science and Engineering A351(2003-6)265-271.
Y.L.Kang,Y.Xu and Z.H.Wang,Study on Microstructures and mechanical Properties of Rheo-Die Casting Semi-Solid A356 Aluminum Alloy,Semi-Solid Processing of Alloys and Composites,Vol.116-117,2006-9,453-456
Yong-lin Kang,Qi-hang Han,Xian-meng Zhao,Ming-hui Cai,Influence of nanoparticle reinforcements on the strengthening mechanisms of an ultrafine - grained dual phase steel containing titanium,Materials and Design 44 (2013) 331–339
Qihang Han,Yonglin Kang, Peter D.Hodgsonb and NicoleStanford,Quantitative measurement of strain partitioning and slip systems in a dual-phase steel,Scripta Materialia 69 (2013) 13–16
Qihang Han, Yonglin Kang, Xianmeng Zhao, Nicole Stanford, Minghui Cai, Suppression of Ms temperature by carbon partitioning from carbon-supersaturated ferrite to metastable austenite during intercritical annealing, Materials and Design, 51, (2013) 409–414.
Shengci Li, Yonglin Kang, ShuangKuang, Effects of microstructure on fatigue crack growth behavior in cold-rolled dual phase steels, Materials Science & Engineering, A612(2014)153–161.
Bing Zhou, Yonglin Kang, Mingfan Qi, Huanhuan Zhang and Guoming Zhu,R-HPDC Process with Forced Convection Mixing Device for Automotive Part of A380 Aluminum Alloy,Materials,2014, 7, 3084-3105
Yonglin Kang, Kelu Wang, Hao Yu, Jie Fu, Delu Liu, Zhongbing Wang, Xuewen Chen, Microstructure evolution and precipitation behavior of low carbon steel hot strips produced by CSP, Journal of university of science and technology Beijing , Vol.11,No.4,2004.8,364~367.