近期论文
查看导师新发文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
1. Xiang Cheng, Xi Zhang, Yebing Tian, Guangming Zheng, Xianhai Yang, Study on micro helical milling of small holes with flat end mills, International Journal of Advanced Manufacturing Technology, 2018, 97: 3119-3128(SCI: 000436813500116)
2. Xiang Cheng, Jiancheng Liu, Guangming Zheng, Xianhai Yang, Yebing Tian, Study of microcutting fundamentals for peripheral and end cutting edges in micro-end-milling, Journal of Micromechanics and Microengineering, 2018, 28: 015011, (SCI: 000417990400001)
3. Xiang Cheng, Li Li, Yumei Huang, Xianhai Yang, Shuangjie Zhou, Theoretical modeling of the critical conditions for ductile-regime milling of single crystalline silicon, Proceedings of the Institution of Mechanical Engineering Part C: Journal of Mechanical Engineering Science, 2015,229(8): 1462-1469 (SCI:000357531000009)
4. X. Cheng, X.T. Wei, X.H. Yang, Y.B. Guo, Unified criterion for brittle-ductile transition in mechanical microcutting of brittle materials, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2014, 136(5):051013-1-8 (SCI:000341978200014)
5. X. Cheng, X.H. Yang, G.M. Zheng, Y.M. Huang, L. Li, Fabrication accuracy analysis of micromilling tools with complicated geometries by wire EDM, Journal of Mechanical Science and Technology, 2014,28(6):2329-2335 (SCI:000338119100036)
6. X. Cheng, X.H. Yang, Y.M. Huang, G.M. Zheng, Li Li, Helical surface creation by wire electrical discharge machining for micro tools,Robotics and Computer-Integrated Manufacturing, 2014, 30(3):287-294 (SCI:000330335500006)
7. Xiang Cheng, Li Li, Yumei Huang, Shuangjie Zhou, Xianhai Yang, Junying Liu,Study on the error distribution and key parameters for a desktop multi-axis micro milling machine tool, International Journal of Advanced Manufacturing Technology, 2013, 67(9-12):2521-2527(SCI:000322326300046)
8. Xiang Cheng, Yumei Huang, Shuangjie Zhou, Junying Liu, Xianhai Yang, Study on the generative design method and error budget of a novel desktop multi-axis laser machine for micro tool fabrications, International Journal of Advanced Manufacturing Technology,2012, 60(5):545-552.(SCI: 000304097500013)
9. Cheng X., Liu J.C., Zheng G.M., Study on the high-precision shrink-fit holders for micro/nano milling, Advances in Computer Science Research, 2015, 10: 1220-1225. (SCI: 000373134100231)
10. Cheng X., Liu J.C., Zheng G.M., Xu R.F., Study on a desktop machine tool for micromilling, Advances in Computer Science Research, 2015, 10: 1226-1231. (SCI: 000373134100232)
11. X. Cheng, Z.G. Wang, K. Nakamoto, K. Yamazaki, A study on the micro tooling for micro/nano milling, International Journal of Advanced Manufacturing Technology, 2011, 53(5): 523-533 (SCI: 000287754200009)
12. X. Cheng, Z.G. Wang, K. Nakamoto, K. Yamazaki, Design and development of micro straight edge end mills for micronano machining of hard and brittle materials, Journal of Mechanical Science and Technology, 2010,24(11),1-8 (SCI: 000284024100015)
13. X. Cheng, Z.G. Wang, S. Kobayashi, K.Nakamoto, K. Yamazaki, Tool fabrication system for micro/nano milling---Function analysis and design of a six-axis Wire EDM machine, International Journal of Advanced Manufacturing Technology, 2010, 46(1): 179-189, (SCI: 000273470700021)
14. X. Cheng, Z.G. Wang, S. Kobayashi, K.Nakamoto, K. Yamazaki, Development of a computer assistant programming system for micro/nano milling tool fabrication by multi-axis Wire EDM, International Journal of Computer Integrated Manufacturing, 2009, 22(9), 847-856,(SCI: 000269658700003)
15. X. Cheng, Z.G. Wang, S. Kobayashi, K.Nakamoto, K. Yamazaki, Development of a six-axis wire electrical discharge machining machine for the fabrication of micro end mills, J. Engineering Manufacture, 2009, 223(2), 121-131,( SCI: 000264223700001)
16. X. Cheng, K. Nakamoto, M. Sugai, S. Matsumoto, Z.G. Wang, K. Yamazaki, Development of ultra-precision machining system with unique wire EDM tool fabrication system for micro/nano-machining, CIRP Annals -Manufacturing Technology (2008) , Volume 57, Issue 1, 2008, pp. 415-420, ( SCI: 000257153300100)
17. X. Cheng, Z.G. Wang, K. Nakamoto, K. Yamazaki, Design and development of micro polycrystalline ball end mill for micro/nano freeform machining of hard and brittle materials, J. Micromech. Microeng. 19 (2009) 115022, (SCI: 000270967800023)
18. Fei Wang, Xiang Cheng, Qianjian Guo, Xianhai Yang, Guangming Zheng, Experimental study on micromilling of thin walls, Journal of Micromechanics and Microengineering, 2018, 29: 015009, (SCI: 000452479600003)
19. X. Cheng, X.H. Yang, G.M. Zheng, R.F. Xu, L. Li, Study on the sticking materials on tools in micromilling of single crystalline silicon, International Journal of Manufacturing and Management, 2017, 31(5): 460-471. (EI: 20181004852136)
20. X. Cheng, H.Y. Liu, X.G. Yang, Y.M. Huang, G.M. Zheng, Study on the design techniques for energy-saving miniaturized machine tools for micromachining, Energy Education Science and Technology Part A: Energy Science and Research, 2014, 32(5): 3173-3182 (EI: 20150700516005)
21. Xiang Cheng, Xi Zhang, Junying Liu, Xianhai Yang, Zhongqiang Tian, Custom micro tooling for mechanical ductile-mode micro/nano machining of hard and brittle materials, Advanced Materials Research, 2012, 426: 20-23. (EI: 20120514722053)
22. Fei Wang, Xiang Cheng, Yuanyong Liu, Xianhai Yang, Fanjie Meng, Micromilling Simulation for the Hard-to-cut Material, Procedia Engineering 2017, 174: 693-699(EI:20171403543160)
23. Qiulian Sun, Xiang Cheng, Yuanyong Liu, Xianhai Yang, Yuanzhen Liu, Modeling and Simulation for Micromilling Mechanisms, Procedia Engineering 2017, 174: 760-766(EI:20171403543230)
24. Xiang Cheng, Xianhai Yang, Li Li, Junying Liu, Design of a three-axis desktop micro milling machine tool, 12th Conference on Machining and Advanced Manufacturing Technology, CMAMT 2013,2013.7.24-27,厦门, 735-739. (EI:20135117092570)
25. Cheng Xiang, Gao Bin, Liu Junying, Yang Xianhai, Study on the ductile-mode milling of brittle ceramics, 2nd International Conference on Mechatronics and Intelligent Materials, 2012.5.18-19, 桂林,3654-3657.( EI: 20121414924325)
26. Xiang Cheng, Junying Liu, Xianhai Yang, Zhongqiang Tian, Peng Jia, Study on the dedicated CAD sub-system for custom tooling, International Conference on Civil Engineering and Building Materials, 2011.7.29-31,昆明, 1930-1933. (EI: 20112714114187)
27. Xiang Cheng, Xi Zhang, Junying Liu, Zhongqiang Tian, Study on the preparation process for high accuracy micro machining by wire electrical discharge machining, 2011 International Conference on Computational Materials Science , 2011.4.17-18, 广州, 56-60. (EI: 20112914166252)
28. X. Cheng, Y.M. Huang, Workspace Generation of The 3-PRS parallel robot based on the NN, , The First International Conference on Machine Learning and Cybernetics (ICMLC 2002, Nov. 3-7), Beijing,China, Vol. 1-4: 2087-2089 (EI: 2003127407130)
29. X. Cheng, Y.M. Huang, Study on kinematic characteristics and singularities of a 3 dof parallel robot, The third International Conference on Machine Learning and Cybernetics (ICMLC 2004, Aug. 26-29), Shanghai,China, 2870-2873(EI: 2004458446951)
30. 程祥,李丽,黄玉美,杨先海,刘军营,多轴微细铣削机床的精度设计方法研究,工程设计学报,2013,20(2):102-106
31. 程祥,杨先海,高斌,刘军营,田忠强,微细塑性铣削单晶硅实验研究,山东理工大学学报,2012,26(4):53-60
32. 吕福顺,程祥,刘肖肖,郑光明,杨先海,PEEK的3D打印参数优化及铣削试验研究,组合机床与自动化加工技术,2018,3(3): 38-44
33. 孙秋莲,程祥,田业冰,郑光明,王飞,微沟槽顶部毛刺宽度微细切削试验研究,组合机床与自动化加工技术,2018,8:53-56
34. 孙秋莲,程祥,杨先海,郑光明,刘原勇,赵国勇,微细铣削力对毛刺尺寸的影响规律研究,工具技术,2018,52(5):42-46
35. 王飞,程祥,杨先海,郑光明,刘原勇,赵国勇,微型薄壁件的微细铣削机理与工艺研究,组合机床与自动化加工技术,2018,7:160-173
36. 孟繁杰,程祥,李元镇,杨先海,PMMA微细铣削实验工艺研究,机械设计与制造,2017,2:101-104
37. 刘肖肖,吕福顺,刘原勇,程祥,杨先海,一种增材与减材复合制造机研究,制造技术与机床,2017,10:49-52.
38. 吕福顺,刘肖肖,程祥,郑光明,杨先海,基于FDM的3D打印参数优化实验研究,组合机床与自动化加工技术,2017,9:114-121
39. 李元镇,程祥,孟繁杰,郑光明,徐汝锋,PMMA微细铣削参数优化实验研究,制造技术与机床,2016(2):21-26
40. 国宪孟,程祥,张升,李贺,曾令国,基于Abaqus的正交切削仿真的有限元分析,机床与液压,2015,43(13):134-141
41. 张升,程祥,微细铣削工艺参数优化实验研究,机械设计与制造,2014,5(1):91-94
42. 代玉娟,程祥,杨先海,张升,微细切削性能有限元仿真分析,计算机仿真,2014,31(3):243-247
43. 张升,程祥,杨先海,代玉娟,超精密桌面微细铣削机床的研制,机械设计与制造,2014,1(1):110-112
44. 李贺,程祥,曾令国,基于nRF24L01芯片的进程无线通讯系统设计,现代电子技术,2014,37(15):32-34