当前位置: X-MOL首页全球导师 国内导师 › 徐书根

研究领域

机械结构完整性评价与失效分析;膨胀套管技术;氢能设备中的力学问题

近期论文

查看导师新发文章 (温馨提示:请注意重名现象,建议点开原文通过作者单位确认)

Shugen Xu, Renchao Wei, Weiqiang Wang, et al. Residual stresses in the welding joint of the nozzle-to-head area of a layered high-pressure hydrogen storage tank[J]. International Journal of Hydrogen Energy, 2014, 39(21): 11061-11070. (SCI和EI收录) Shugen Xu, Weiqiang Wang, Yinglei Chang. Using FEM to predict residual stresses in girth welding joint of layered cylindrical vessels[J]. International Journal of Pressure Vessels and Piping, 2014, 119: 1-7. (SCI和EI收录) Shugen Xu, Chao Chen. Elastic stress distribution in layered spherical shells with gaps caused by internal pressure [J]. Journal of Pressure Vessel Technology-ASME, 2013, 135(4): 04120401-07. (SCI和EI收录) Shugen Xu, Weiqiang Wang. Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger [J]. International Journal of Pressure Vessels and Piping, 2013, 101, 37-44. (SCI和EI收录) Shugen Xu, Yanling Zhao. Using FEM to determine the thermo-mechanical stress in tube to tube–sheet joint for the SCC failure analysis [J]. Engineering Failure Analysis, 2013, 34, 24-34. (SCI和EI收录) Shugen Xu, Weiqiang Wang, Mingda Song, et al. Modified formulation of layer stresses due to internal pressure of a layered vessel with interlayer gaps [J]. Journal of Pressure Vessel Technology-ASME, 2010, 132(5): 05120101-08.(SCI和EI收录) Shugen Xu, Weiqiang Wang, Yuliang Cui, et al. A new approach to elastodynamic response of cylindrical shell based on developed solution structure theorem for wave equation [J]. Journal of Pressure Vessel Technology-ASME, 2012, 134(1): 01121001- 07. (SCI和EI收录) Shugen Xu, Weiqiang Wang. Analysis on elastoplastic stresses of the layered cylinder shell with interlayer gaps [J]. Journal of Pressure Vessel Technology-ASME, 2012, 134(3): 03120601-05. (SCI和EI收录) Shugen Xu, Weiqiang Wang, Mengli Li. A modified weld structure of layered urea reactor based on stress analysis and leak detection [J]. Journal of Pressure Vessel Technology-ASME, 2012, 134(3): 03120301- 06. (SCI和EI收录) Shugen Xu,Weiqiang Wang,Huadong Liu,et al.Catastrophic explosion of a multilayered urea reactor[C].Ammonia Plant Safety and Related Facilities,2008,49:375-386.(EI收录) Shugen Xu,Weiqiang Wang,Huadong Liu.The stress corrosion cracking of austenitic stainless steel heat exchange tubes—three cases study[C].ASME, Pressure Vessels and Piping Division (Publication) PVP,2010,5:335-343.(EI收录) Shugen Xu, Weiqiang Wang, The pressure variation of BLEVE triggered by liquid release through a crack in the cylindrical pressure vessel, The 2012 International Symposium on Structural Integrity, 281-287, Jinan, 2012.10.31-11.04 徐书根,王威强,李梦丽,等.平阴尿素合成塔起爆源处层板应力腐蚀开裂分析[J].金属热处理,2009,34(1):104-107. 徐书根,王威强,张强,等.氨合成废热锅炉换热管应力腐蚀开裂分析[J].压力容器,2008,25(3):41-45. 徐书根,王威强.压力容器蒸气爆炸现象研究进展[J].化工机械,2011,38(6):265-274. 徐书根,赵延灵,李国成,等.带加强筋的储罐罐顶稳定性和强度有限元分析[J].化工机械,2012,39(3):475-477. 徐书根,王威强.奥氏体不锈钢换热管应力腐蚀开裂分析[J].化工机械,2012,39(5):639-642. 徐书根,赵延灵,王宗明,等.12Cr1MoVG换热管泄漏失效原因分析[J].压力容器,2012,39(4):62-67. 徐书根,王威强.局部冲击载荷作用下带间隙多层圆筒层板弹性动力响应研究[J].石油化工设备,2012,(3): 徐书根,王威强,李梦丽,等.尿素合成塔爆炸载荷类型与破坏形态的关系分析[J].山东大学学报(工学版),2008,38(3):51-57. 徐书根,王威强,宋明大,等.2.25Cr1Mo钢试块缺陷的超声TOFD检测[J].无损检测,2007,29(11):627-629. 徐书根,王威强,赵培征,等.管道缺陷的磁致伸缩超声导波检测[J].无损检测,2008,30(7):434-437.

推荐链接
down
wechat
bug