近期论文
查看导师新发文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
论文
[1] Demin Chen, Biao Lu,Fangqin Dai, Guang Chen,Xihe zhang. Bottleneck of slab thermal efficiency in reheating furnace based onenergy apportionment model [J]. ENERGY. 2018 (150) 1058-1069. ( SCI检索,IF:4.552)
[2]Demin Chen, Biao Lu, FangQin Dai*, Guang Chen, Weiping Yu. Variations on Billet Gas Consumption Intensity of Reheating Furnace in Different Production States. Applied Thermal Engineering. 2018,129 :1058–1067.( SCI检索,IF:3.356)
[3]Demin Chen, Biao Lu, Xihe Zhang, Fangqin Dai, Guang Chen, Yingjie Liu. Fluctuation Characteristic of Billet Region Gas Consumption in Reheating Furnace Based on Energy Apportionment Model. Applied Thermal Engineering. 2018,136 :152–160.( SCI检索,IF:3.356)
[4]Chen, D.*, Lu, B., Chen G. Research on Energy Consumption System of iron and steel enterprise with Bottleneck. International Journal of Engineering Systems Modelling and Simulation. 2018,10(2):103-110.(EI检索)
[5]Chen, D., Lu, B*., Chen, G., Yu, W. Influence of the Production Fluctuation on the Process Energy Intensity in Iron and Steel Industry [J]. Advances in Production Engineering & Management. 2017,12(1):75-87. (SCI检索,IF:1.424)
[6]Biao Lu, Demin Chen, Guang Chen, Weiping Yu*. An energy apportionment model for reheating furnace in a hot rolling mill – A case study [J]. Applied Thermal Engineering, 2017, 112: 174-183. (SCI检索,IF:3.356)
[7]Biao Lu, Guang Chen, Demin Chen, Weiping Yu*. An energy intensity optimization model for production system in iron and steel industry [J]. Applied Thermal Engineering. 2016,100:285-295. (SCI检索,IF:3.356)
[8]Demin Chen*, Guang Chen, Fangqin Dai et al., Study on Material and Energy Flow Analysis and Waste Heat Utilization Technology of Iron Making Process. ICFMD 2015.7-13.（ISTP检索）
[9]Lu Biao, Chen Guang, Chen Demin, Yu Weiping*, Ding Yi. Impact of material and energy flow variation-based iron/steel ratio on production cost [J]. Journal of Southeast University (English Edition) 2015,31(3):375-379.(EI检索)
[10]Gu M Y, Chen G, Liu X, et al. Numerical simulation of slab heating process in a regenerative walking beam reheating furnace[J]. International Journal of Heat & Mass Transfer, 2014, 76(6):405-410. (SCI)
[11]Lu Biao*, Yu Wei Ping, Chen De Min, Chen Guang, Cao Qu Quan, Xu Shi. The influential factors of energy consumption based on the analysis of material and energy flow in coking process-step [C]. Environment, Energy and Applied Technology-Proceedings of the 2014 3rd International Conference on Frontier of Energy and Environment Engineering (ICFEEE 2014). 783-786.(EI检索)
[12]Gu M, Chen G, Zhang M, et al. Three-dimensional simulation of the pulverized coal combustion inside blast furnace tuyere[J]. Applied Mathematical Modelling, 2010, 34(11):3536-3546.
[13]Chen G.., Gu M. Simulation of steel coil heat transfer in a high performance hydrogen furnace. Heat transfer Engineering, 2007, 28(1): 25-30 (EI &SCI) .
[14]Gu M., Chen G., Zhang M., Dai X. Simulation of steel coil heat transfer in PHP furnace.ACTA METALLURGICA SINICA(ENGLISH LETTERS), 2005, 18(5):647～652.
[15]Chen G. Development of process energy intensity formula under different state variables. Journal ofHarbinof Technology (New Series), 2004, 11(6): 694-696(EI).
[16]陈光,向顺华,包向军,郭水华,李杰,闫丹.不粘涂层对焦炉上升管换热器的导热性能影响[A].中国金属学会能源与热工分会.第八届全国能源与热工学术年会论文集[C].中国金属学会能源与热工分会:,2015:10.
[17]陈光,蔡震纲,张红光,张颖,肖维民,李丹.大型加热炉群能效指标评价诊断体系的建立与系统开发[A].中国金属学会能源与热工分会.第八届全国能源与热工学术年会论文集[C].中国金属学会能源与热工分会:,2015:9.
[18]陈光,陈赛,王攀峰,张红光.连铸板坯纵裂纹的研究——基于数据挖掘技术[A].中国金属学会能源与热工分会.第八届全国能源与热工学术年会论文集[C].中国金属学会能源与热工分会:,2015:9.
[19]陈光,陈赛,郑光明,董璐,闫丹,王双.捣固焦炉高压氨水消烟的数值模拟[A].中国金属学会能源与热工分会.第八届全国能源与热工学术年会论文集[C].中国金属学会能源与热工分会:,2015:8.
[20]陈光,陈赛,郑光明,董璐,闫丹,王双.捣固焦炉高压氨水消烟的数值模拟[J].安徽工业大学学报(自然科学版),2015,03:245-250.
[21]陈光,李任远,柴震,宋伟.洗涤式燃气调压器的稳压性能研究[J].冶金能源,2015,01:47-51.
[22]陈光,郑鑫,张建军.一种水冷式扩散吸收式制冷机实验研究[J].低温与超导,2014,01:74-77.
[23]陈光,宋伟,柴震,李任远.红外热像测温技术对二冷区冷却均匀性的研究[J].热加工工艺,2014,23:86-89.
[24]陈光,董璐,郑鑫,李智虎.低品位余热氨水吸收式制冷机理论与实验研究[J].低温与超导,2014,04:62-66.
[25]陈光,李玲云,丁毅,曹曲泉,许石,郭红玲.钢铁企业系统能耗影响因素分析[J].钢铁,2014,04:86-89.
[26]陈德敏,陈光,陆彪,丁毅,虞维平.铁钢比对钢铁企业吨钢生产成本的影响研究[A].中国金属学会能源与热工分会.大连.2015:9.
[27]陈德敏,陈光,陆彪,丁毅,虞维平.铁钢比对钢铁企业吨钢生产成本的影响研究[A].中国金属学会能源与热工分会.大连.2015:9.
[28]陈德敏,陈光,陆彪,丁毅,虞维平.铁钢比对钢铁企业吨钢生产成本的影响研究[A].中国金属学会能源与热工分会.第八届全国能源与热工学术年会论文集[C].中国金属学会能源与热工分会:,2015:9.
[29]包向军,周剑波,陈光.利用炼钢工艺处理废塑料的工业试验研究[J].工业加热,2016,01:30-32.
[30]包向军,周剑波,陈光.废塑料炼钢造渣剂的制备工艺[J].冶金能源,2016,02:38-39+45.
[31]楚化强,冯艳,顾明言,陈光,徐靖,单佳.鱼雷罐罐体温降与内衬厚度关系特性分析[J].安徽工业大学学报(自然科学版),2016,02:95-99.
[32]楚化强,顾明言,陈光,单佳.混铁车温度与内衬厚度关系模拟研究[A].中国金属学会能源与热工分会.第八届全国能源与热工学术年会论文集[C].中国金属学会能源与热工分会:,2015:7.
[33]包向军,周剑波,陈光.转炉工艺处理废塑料的物料平衡和热量平衡分析[J].工业加热,2015,03:40-41.
授权发明专利
[1]陈光,王双,张西和,王恒达,孙蓉.一种粒料煅烧回转窑产品余热直吸式回收方法[P].安徽：CN107449286A,2017-12-08.
[2]陈光,王恒达,包向军,陈德敏.一种基于高温渣余热回收的高炉熔渣干法处理方法[P].安徽：CN106521056A,2017-03-22.
[3]陈光,王恒达,包向军,王情伟,查承志.一种冷床台车底部内侧动密封装置及其密封方法[P].安徽：CN106403607A,2017-02-15.
[4]陈光,朱宝忠,王恒达.一种热解装置的使用方法[P].安徽：CN106147810A,2016-11-23.
[5]陈光,闫丹,包向军.一种抗粘结荒煤气的管束式余热回收系统[P].安徽：CN105602582A,2016-05-25.
[6]陈光,闫丹,包向军.一种抗粘结荒煤气的热管式余热回收系统[P].安徽：CN105605954A,2016-05-25.
[7]陈光,王双,包向军,汪刚,孔德胜,王明月,韩伟康,李海洋.一种金属管连续加热喷涂系统及其使用方法[P].安徽：CN105562263A,2016-05-11.
[8]陈光,王双,孙蓉,张西和,闫丹,王恒达.一种粒料煅烧回转窑产品余热环形间壁式回收系统及方法[P].安徽：CN104964572A,2015-10-07.
[9]陈光,王双,张西和,王恒达,孙蓉.一种粒料煅烧回转窑产品余热直吸式回收系统及方法[P].安徽：CN104949537A,2015-09-30.
[10]陈光,闫丹,包向军.一种抗粘结自流焦炉荒煤气余热回收换热单元的施工方法[P].安徽：CN104697361A,2015-06-10.
[11]陈光,程波,李任远,柴震.一种用于燃气预处理的调压装置[P].安徽：CN102841190A,2012-12-26.
[12]陈光,李智虎,赵玉艳.浓度自适应型扩散-吸收式制冷机[P].安徽：CN101839583A,2010-09-22.
[13]陈光,李智虎.压缩-吸收-扩散复合式制冷装置及其制冷循环方法[P].安徽：CN101344345,2009-01-14.
[14]包向军,陈光,李杰,陈涛,严大炜,闫丹.一种金属管道内壁喷涂工艺[P].安徽：CN106824638A,2017-06-13.
[15]陈德敏,陈光,王恒达,包向军,李显宝.一种基于高温渣余热回收的高炉熔渣干法处理装置[P].安徽：CN106435068A,2017-02-22.
[16]王恒达,陈光,包向军,李显宝,冯森,侯璞明.一种烧结冷却机及其动密封设备[P].安徽：CN106403621A,2017-02-15.
[17]陈宜华,陈光,孟冠华,贾勇,王琼杰,李智芳.一种连续清灰再生过滤式除尘器[P].安徽：CN105749649A,2016-07-13.
[18]包向军,陈光,李海洋,王双,王明月,汪刚,孔德胜.一种金属管加热喷涂装置及其使用方法[P].安徽：CN105562262A,2016-05-11.
[19]贾勇,陈光,戴波,吴胜华,盛广宏.氨法脱硫吸收产物+4价硫氧化系统及其优化调控方法[P].安徽：CN105032154A,2015-11-11.
[20]包向军,陈光,李杰,陈涛,严大炜,闫丹.一种长杆喷枪喷涂支架及金属管道内壁喷涂工艺[P].安徽：CN104941855A,2015-09-30.
[21]包向军,陈光,陈涛,李杰,严大炜,闫丹,王双,汪刚.一种定量检测涂层不粘性能装置及涂层不粘性能检测方法[P].安徽：CN104897567A,2015-09-09.
[22]何烈云,陈光,李翔,张西和,康立文.多功能火焰炉炉内测试仪[P].江苏：CN101718594A,2010-06-02.
[23]顾明言,范煜东,陈光,楚化强,何先辉.一种利用汽车尾气发电的车载制冷坐垫[P].安徽：CN106314236A,2017-01-11.
[24]练建军,陈波,陈光,孟冠华,刘宝河,王诗生,王育来.一种去除地表水体钼酸盐的生物碳质复合吸附材料的制备方法[P].安徽：CN106268720A,2017-01-04.
[25]贾勇,丁万丽,陈光,吴胜华,陈宜华,丁希楼,戴波,李智芳.一种废SCR脱硝催化剂中金属钨和钒的分离、回收方法[P].安徽：CN106048230A,2016-10-26.
[26]芮先宏,徐莲花,陈光,徐进良,孙运兰,朱宝忠.一种高倍率橄榄石型磷酸盐纳米薄片正极材料及其制备方法[P].安徽：CN105870416A,2016-08-17.
[27]贾勇,殷李国,吴胜华,陈光,李智芳,丁希楼,陈宜华,戴波.一种氨法脱硫喷淋塔系统及SO2吸收传质系数的确定方法[P].安徽：CN106000041A,2016-10-12.
[28]贾勇,殷李国,吴胜华,陈光,李智芳,丁希楼,陈宜华,戴波.一种氨法脱硫喷淋塔设计和运行的计算模型及优化调控方法[P].安徽：CN105964123A,2016-09-28.
[29]另有发明专利（公开）共44项；实用新型专利共34项.
京公网安备 11010802027423号