当前位置:
X-MOL 学术
›
Med. Sci. Sports Exercise
›
论文详情
Our official English website, www.x-mol.net, welcomes your
feedback! (Note: you will need to create a separate account there.)
Linear Modelling of the V̇O2/PO-Relationship during Constant Work Rate Exercise.
Medicine & Science in Sports & Exercise ( IF 4.1 ) Pub Date : 2025-01-13 , DOI: 10.1249/mss.0000000000003647
Lena Stuer,Jan Boone,Patrick Mucci,Alessandro L Colosio,Jan G Bourgois,Kevin Caen
Medicine & Science in Sports & Exercise ( IF 4.1 ) Pub Date : 2025-01-13 , DOI: 10.1249/mss.0000000000003647
Lena Stuer,Jan Boone,Patrick Mucci,Alessandro L Colosio,Jan G Bourgois,Kevin Caen
INTRODUCTION
The linear and continuous increase in power output (PO) during ramp incremental (RI) exercise causes a distinct V̇O2/PO relationship compared to constant work rate (CWR) exercise. Current methods enabling a translation of ramp-derived PO to CWR PO assume a linear development of the CWR V̇O2/PO relationship in the heavy-intensity domain. This study aimed to model the RI versus CWR V̇O2/PO relationship to investigate whether the loss of mechanical efficiency above GET develops linearly. A second aim was to assess the reliability of ramp-derived parameters incorporated in translation strategies.
METHODS
Fourteen healthy young participants (7 males; 7 females) performed a RI test and several CWR tests across the heavy- and severe-intensity domains in order to model the RI and CWR V̇O2/PO relationships. The CWR relationship was fitted using linear, polynomial and exponential models. Root mean square error (RMSE) and Akaike information criterion (AICC) were determined to evaluate the model's goodness-of-fit. For reliability purposes, target PO of CWR tests were achieved using a preceding RI portion, similar to the initial RI test.
RESULTS
The linear fit of the CWR V̇O2/PO relationship was associated with the lowest RMSE and AICC. The associated R2 for the heavy-intensity domain was 0.94. Reliability measures were excellent for baseline V̇O2 and acceptable to good for s1-ramp and s2- ramp. For MRT, a high variability was observed.
CONCLUSIONS
This study confirmed that the CWR V̇O2/PO relationship in the heavy-intensity domain is linear. Based on these results, it is justified to apply correction strategies that mind the different dynamics of V̇O2 during RI versus CWR exercise.
中文翻译:
恒定工作速率练习期间 V̇O2/PO 关系的线性建模。
引言 与恒定工作速率 (CWR) 运动相比,斜坡增量 (RI) 运动期间功率输出 (PO) 的线性和持续增加会导致明显的 V̇O2/PO 关系。当前能够将 ramp 衍生的 PO 转换为 CWR PO 的方法假设 CWR V̇O2/PO 关系在重强度域中呈线性发展。本研究旨在模拟 RI 与 CWR V̇O2/PO 的关系,以研究 GET 以上的机械效率损失是否呈线性发展。第二个目标是评估翻译策略中纳入的 ramp 衍生参数的可靠性。方法 14 名健康的年轻参与者 (7 名男性;7 名女性) 在重强度和重度强度领域进行了一项 RI 测试和多项 CWR 测试,以模拟 RI 和 CWR V̇O2/PO 关系。CWR 关系使用线性、多项式和指数模型进行拟合。确定均方根误差 (RMSE) 和 Akaike 信息准则 (AICC) 以评估模型的拟合优度。出于可靠性目的,CWR 测试的目标 PO 是使用前面的 RI 部分实现的,类似于初始 RI 测试。结果 CWR V̇O2/PO 关系的线性拟合与最低的 RMSE 和 AICC 相关。重强度域的相关 R2 为 0.94。基线 V̇O2 的可靠性测量非常好,s1-ramp 和 s2-ramp 可接受到良好。对于 MRT,观察到高度可变性。结论 本研究证实了重强度域中的 CWR V̇O2/PO 关系是线性的。基于这些结果,有理由应用校正策略,这些策略要注意 RI 与 CWR 运动期间 V̇O2 的不同动力学。
更新日期:2025-01-13
中文翻译:
![](https://scdn.x-mol.com/jcss/images/paperTranslation.png)
恒定工作速率练习期间 V̇O2/PO 关系的线性建模。
引言 与恒定工作速率 (CWR) 运动相比,斜坡增量 (RI) 运动期间功率输出 (PO) 的线性和持续增加会导致明显的 V̇O2/PO 关系。当前能够将 ramp 衍生的 PO 转换为 CWR PO 的方法假设 CWR V̇O2/PO 关系在重强度域中呈线性发展。本研究旨在模拟 RI 与 CWR V̇O2/PO 的关系,以研究 GET 以上的机械效率损失是否呈线性发展。第二个目标是评估翻译策略中纳入的 ramp 衍生参数的可靠性。方法 14 名健康的年轻参与者 (7 名男性;7 名女性) 在重强度和重度强度领域进行了一项 RI 测试和多项 CWR 测试,以模拟 RI 和 CWR V̇O2/PO 关系。CWR 关系使用线性、多项式和指数模型进行拟合。确定均方根误差 (RMSE) 和 Akaike 信息准则 (AICC) 以评估模型的拟合优度。出于可靠性目的,CWR 测试的目标 PO 是使用前面的 RI 部分实现的,类似于初始 RI 测试。结果 CWR V̇O2/PO 关系的线性拟合与最低的 RMSE 和 AICC 相关。重强度域的相关 R2 为 0.94。基线 V̇O2 的可靠性测量非常好,s1-ramp 和 s2-ramp 可接受到良好。对于 MRT,观察到高度可变性。结论 本研究证实了重强度域中的 CWR V̇O2/PO 关系是线性的。基于这些结果,有理由应用校正策略,这些策略要注意 RI 与 CWR 运动期间 V̇O2 的不同动力学。