Topographic Scanning Electronic Microscopy Reveals the 3D Surface Structure of Materials,Advanced Functional Materials

当前位置： X-MOL 学术 › Adv. Funct. Mater. › 论文详情

Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)

Topographic Scanning Electronic Microscopy Reveals the 3D Surface Structure of Materials
Advanced Functional Materials ( IF 18.5 ) Pub Date : 2024-12-20 , DOI: 10.1002/adfm.202420372
Wen Sun, Yichen Xu, Ying Zhou, Zhihan Zeng, Lei Wang, Jianyong Ouyang

Scanning electron microscopy (SEM) is a very popular technology to analyze the surface morphology of various materials in both academia and industry. Its principle is the detection of secondary electron emission and electron scattering interactions between the electron beam and the sample surface. It requires the deposition of a thin metal film like Au on non‐conductive samples to prevent charge accumulation. However, due to the discontinuity of the Au film along the vertical direction of a sample, the SEM images cannot provide information along the vertical direction. Additionally, the gold films have grains of 10–12 nm in diameter, which can limit the resolution of the SEM images. Here, topographic SEM is reported by coating poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS, an intrinsically conductive polymer) onto samples instead of metal deposition. High‐quality features along both the horizontal and vertical directions can be observed on the SEM images because PEDOT:PSS can form a continuous film along both directions. Furthermore, due to the featureless morphology of the PEDOT:PSS films, the resolution of SEM images is significantly higher than that with gold deposition. The application of topographical SEM in the characterization of various materials, including patterned semiconductors, nanostructured materials, energy materials, biomaterials, etc is demonstrated.

更新日期：2024-12-20

点击分享查看原文

点击收藏

阅读更多本刊新发论文本刊介绍/投稿指南