当前位置: X-MOL 学术AlChE J. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Discharge reactor for fabricating efficient supported metal catalysts at room temperature in the absence of H2
AIChE Journal ( IF 3.5 ) Pub Date : 2024-11-30 , DOI: 10.1002/aic.18669
Peng Liu, Xin‐Yu Meng, Xujun Wang, Yiyi Zhao, Yu‐Long Men, Yun‐Xiang Pan

Supported metal catalysts have been widely applied and commonly fabricated through the H2 reduction process. Herein, we develop a H2‐free room‐temperature discharge‐driven reduction (RT‐DR) reactor for fabricating supported metal catalysts at room temperature without H2. By RT‐DR reactor, a catalyst with pseudo‐boehmite (PB) as support (CdS/Pt/PB) is fabricated. In visible‐light‐driven photocatalytic H2O splitting to H2, CdS/Pt/PB shows a H2 evolution rate of 1132 μmol h−1, which is greatly enhanced than that on catalyst prepared by traditional H2‐reduction (633 μmol h−1). RT‐DR reactor is also used to prepare a catalyst with low sodium PB (LSPB) as support (CdS/Pt/LSPB). In visible‐light‐driven photocatalytic H2O splitting to H2, CdS/Pt/LSPB shows a H2 evolution rate of 2554 μmol h−1, which is 2.5 times higher than that on catalyst prepared by traditional H2‐reduction (1029 μmol h−1). Thus, RT‐DR reactor has high efficiency and universality in preparing catalysts, thus offering a great potential for commercialization.

中文翻译:


放电反应器,用于在室温下在没有 H2 的情况下制造高效的负载型金属催化剂



负载型金属催化剂已得到广泛应用,通常通过 H2 还原工艺制造。在此,我们开发了一种无 H2 室温放电驱动还原 (RT-DR) 反应器,用于在室温下制造负载型金属催化剂,无需 H2。通过 RT-DR 反应器,制备了以准勃姆石 (PB) 为载体 (CdS/Pt/PB) 的催化剂。在可见光驱动的光催化 H 2 O 分裂成 H 2 中,CdS/Pt/PB 显示 H 2 析出速率为 1132 μmol h -1 ,这比传统 H 2 还原制备的催化剂 (633 μmol h -1) 大大增强。RT-DR 反应器还用于制备以低钠 PB (LSPB) 为载体 (CdS/Pt/LSPB) 的催化剂。在可见光驱动的光催化 H 2 O 分裂成 H 2 中,CdS/Pt/LSPB 显示 H 2 释放速率为 2554 μmol h-1,比传统 H2 还原制备的催化剂 (1029 μmol h-1) 高 2.5 倍。因此,RT-DR 反应器在制备催化剂方面具有很高的效率和通用性,因此具有很大的商业化潜力。
更新日期:2024-11-30
down
wechat
bug