当前位置:
X-MOL 学术
›
Macromol. Mater. Eng.
›
论文详情
Our official English website, www.x-mol.net, welcomes your
feedback! (Note: you will need to create a separate account there.)
Thermo-Responsive Ultrafiltration Block Copolymer Membranes Based on Polystyrene-block-poly(diethyl acrylamide)
Macromolecular Materials and Engineering ( IF 4.2 ) Pub Date : 2023-11-14 , DOI: 10.1002/mame.202370025
Florian V. Frieß , Frank Hartmann , Lea Gemmer , Jens Pieschel , Bart‐Jan Niebuur , Matthias Faust , Tobias Kraus , Volker Presser , Markus Gallei
Macromolecular Materials and Engineering ( IF 4.2 ) Pub Date : 2023-11-14 , DOI: 10.1002/mame.202370025
Florian V. Frieß , Frank Hartmann , Lea Gemmer , Jens Pieschel , Bart‐Jan Niebuur , Matthias Faust , Tobias Kraus , Volker Presser , Markus Gallei
![]() |
Back cover: In article 2300113 by Markus Gallei and co-workers, a thermo-responsive ultrafiltration membrane is prepared based on polystyrene-block-poly(diethyl acrylamide) synthesized by means of “living” anionic polymerization. The membranes are fabricated using the non-solvent-induced phase separation (NIPS) process exhibiting up to a 23-fold increase for the water permeance when crossing the lower critical solution temperature of the poly(diethyl acrylamide) block segment in water.
中文翻译:
基于聚苯乙烯-嵌段-聚二乙基丙烯酰胺的热响应型嵌段共聚物膜
封底:在Markus Gallei 及其同事的文章2300113 中,基于通过“活性”阴离子聚合合成的聚苯乙烯嵌段聚二乙基丙烯酰胺制备了热响应性超滤膜。该膜采用非溶剂诱导相分离 (NIPS) 工艺制造,当超过聚(二乙基丙烯酰胺)嵌段片段在水中的较低临界溶液温度时,水渗透率增加高达 23 倍。
更新日期:2023-11-14
中文翻译:

基于聚苯乙烯-嵌段-聚二乙基丙烯酰胺的热响应型嵌段共聚物膜
封底:在Markus Gallei 及其同事的文章2300113 中,基于通过“活性”阴离子聚合合成的聚苯乙烯嵌段聚二乙基丙烯酰胺制备了热响应性超滤膜。该膜采用非溶剂诱导相分离 (NIPS) 工艺制造,当超过聚(二乙基丙烯酰胺)嵌段片段在水中的较低临界溶液温度时,水渗透率增加高达 23 倍。