The molybdenum disulfide (MoS₂)- graphene oxide (GO) hybrids have fashioned by a clean hydrothermal route. Initially, two-dimensional GO sheets have synthesized using the modified Hummer’s method and intercalated into the MoS₂ nanoparticles (NPs). The sophisticated characterizations comprising X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) analyzer, custom designed gas sensing set-up, etc. utilized for the analysis of as-prepared MoS₂-GO (1 to 5 wt%) hybrids. The maximum sensor response exhibited by as-prepared MoS₂-GO (3%) hybrid sensor was 39.16% towards 100 ppm hydrogen sulfide (H₂S) gas at room temperature (RT, i.e., 28 °C) in a quickest response time (6.13 s) and least concentration of H₂S detected was 1 ppm with response value 0.51%. This report investigated first time that as-prepared MoS₂-GO (MG) hybrids with varied proportion of GO (1 to 5 wt%) demonstrated spectacularly improved gas sensing performance towards H₂S at RT. The boosted gas sensing performance of MG hybrids could be attributed to the synergistic influence of constituents i.e., MoS₂ NPs and GO sheets. An impedance spectroscopy has been exploited to study the interactions between H₂S gas molecules and MG hybrid sensor surface.

二硫化钼（MoS ₂）-氧化石墨烯（GO）杂化物是通过清洁水热路线形成的。最初，使用改进的 Hummer 方法合成了二维 GO 片，并将其嵌入到 MoS ₂纳米颗粒 (NP) 中。复杂的表征包括 X 射线衍射 (XRD)、拉曼光谱、场发射扫描电子显微镜 (FESEM)、能量色散光谱 (EDS)、透射电子显微镜 (TEM)、X 射线光电子能谱 (XPS)、Brunauer-Emmett-Teller (BET) 分析仪、定制设计的气体传感装置等，用于分析所制备的 MoS 2 -GO（1 至 5 wt%）杂化_物。所制备的 MoS _{2表现出的最大传感器响应}-GO (3%) 混合传感器在室温 (RT，即 28 °C) 下对100 ppm 硫化氢 (H _{2 S) 气体的检测率为 39.16%，响应时间最快 (6.13 s)，检测到的 H 2} S 最低浓度为 1 ppm，响应值为 0.51%。该报告首次研究了所制备的具有不同比例 GO（1 至 5 wt%）的 MoS ₂ -GO (MG) 杂化物，显示出在室温下对 H ₂ S 的气体传感性能显着改善。MG 混合体的气体传感性能的提高可归因于成分（即 MoS ₂ NP 和 GO 片）的协同影响。_{阻抗谱已被用来研究 H 2}之间的相互作用S气体分子和MG混合传感器表面。