当前位置: X-MOL 学术J. Alloys Compd. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
N-doped porous carbon coated g-C3N4/ g-C3N4 heterojunction for polysulfide restriction and catalytic conversion towards enhanced lithium-sulfur batteries
Journal of Alloys and Compounds ( IF 5.8 ) Pub Date : 2023-01-06 , DOI: 10.1016/j.jallcom.2023.168772
Youlan Zou , Haiyan Zou , Zhuoran Ao , Yiyang Lv , Nantao Chen , Yuxing Huang

Notorious shuttle effects and poor electrical conductivity of S have long hindered the commercialization of lithium-sulfur (Li-S) batteries. Herein, N-doped porous carbon coated graphitic carbon nitride heterojunction (g-C3N4/ g-C3N4 @C) composites was prepared by growing g-C3N4/ g-C3N4 heterojunction on the pores of the porous carbon. The effective interface adhesion of g-C3N4/ g-C3N4 heterojunction and high conductive porous carbon served as S host insure the initial specific capacity of 752 mAh/g at 1 C, reversible capacity of 496 mAh/g at 1 C after 400 cycles, and higher rate capacity of 468 mAh/g at 2 C after 500 cycles for Li-S batteries. The mechanism of this ternary synergetic system for enhancement of electrochemical performance is based on effective interface adhesion and conductive property caused by different band energies of g-C3N4 and the N-doped porous carbon.



中文翻译:

N 掺杂多孔碳涂层 g-C3N4 / g-C3N4 异质结用于多硫化物限制和催化转化以增强锂硫电池

臭名昭著的穿梭效应和 S 的导电性差长期以来一直阻碍着锂硫 (Li-S) 电池的商业化。在此,通过在多孔碳的孔隙上生长gC 3 N 4 / gC 3 N 4异质结制备了N掺杂多孔碳包覆的石墨氮化碳异质结(gC 3 N 4 / gC 3 N 4 @C)复合材料。gC 3 N 4 / gC 3 N 4的有效界面附着力异质结和高导电多孔碳作为 S 主体确保 1 C 时的初始比容量为 752 mAh/g,循环 400 次后 1 C 时的可逆容量为 496 mAh/g,2 C 时的更高倍率容量为 468 mAh/g锂硫电池经过 500 次循环后。这种三元协同体系增强电化学性能的机制是基于由gC 3 N 4和N掺杂多孔碳的不同带能引起的有效界面粘附和导电性能。

更新日期:2023-01-06
down
wechat
bug