Titanium Matrix Composites (TMC) with ceramic reinforcement have gained prominence in recent years due to their improved mechanical properties. The goal of this analysis is to improve the wear resistance of Ti6Al4V (Ti64)-based composites supplemented with TiB₂ (5%) + TiC (5%). The dry sliding performance of Ti6Al4V and Ti6Al4V/5 wt% TiB₂-5 wt% TiC powder metallurgy composites was examined. A pin-on-disk wear experiment is employed to investigate the wear and friction behaviour of TMCs under various sliding situations. The results demonstrate that at greater sliding speeds, the wear rate of titanium alloy is considerable. Field Emission-Scanning Electron Microscope (FE-SEM) and Energy Dispersive Spectroscopy (EDS) were used to investigate the effects of Titanium di Boride(TiB₂) and Titanium Carbide(TiC) on microstructural features and wear parameters of titanium specimens. The incorporation of reinforcements TiB₂ and TiC obtained by powder metallurgy increased the wear resistance of the Ti6Al4V matrix, according with study.