当前位置: X-MOL 学术ACS Catal. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Manganese Oxide Overlayers Promote CO Oxidation on Pt
ACS Catalysis ( IF 11.3 ) Pub Date : 2021-11-02 , DOI: 10.1021/acscatal.1c04214
Siwon Lee 1, 2 , Chao Lin 2 , Seunghyun Kim 1 , Xinyu Mao 2 , Taeho Kim 3, 4 , Sang-Joon Kim 3, 4 , Raymond J. Gorte 2 , WooChul Jung 1
Affiliation  

The influence of manganese oxide on CO oxidation over Pt was investigated. Pt/Al2O3 catalysts were modified by the atomic layer deposition (ALD) of MnOx with deposition before or after addition of Pt, and the results were compared to those with an unmodified Pt/Al2O3 catalyst. The addition of MnOx improved the catalyst durability, mitigating the agglomeration of Pt particles after thermal aging at 1073 K. The addition of MnOx also promoted CO oxidation rates by creating active Pt–MnOx interfacial sites despite the fact that CO adsorption was suppressed after high-temperature calcination. Transmission electron microscopy (TEM) showed that Pt was uniformly covered by a thin film of MnOx after calcination. The implications of these results with regard to understanding the MnOx promotion of Pt catalysts are discussed.

中文翻译:

氧化锰覆盖层促进 Pt 上的 CO 氧化

研究了锰氧化物对 Pt 上 CO 氧化的影响。Pt/Al 2 O 3催化剂通过MnO x原子层沉积(ALD) 改性,在添加Pt 之前或之后进行沉积,并将结果与​​未改性Pt/Al 2 O 3催化剂的结果进行比较。MnO x 的添加提高了催化剂的耐久性,在 1073 K 热老化后减轻了 Pt 颗粒的团聚。MnO x 的添加还通过产生活性 Pt-MnO x提高了 CO 氧化速率尽管在高温煅烧后抑制了 CO 吸附,但界面位点仍然存在。透射电子显微镜 (TEM) 显示 Pt在煅烧后被MnO x薄膜均匀覆盖。讨论了这些结果对理解Pt 催化剂的 MnO x促进作用的影响。
更新日期:2021-11-19
down
wechat
bug