We have prepared MoS₂/SiO₂/TiO₂ ternary heterojunction composite for the anti‐corrosion and anti‐fouling applications. The molybdenum disulfide (MoS₂) adorned silica (SiO₂) nanoparticles are synthesized through the wet chemical process. The prepared MoS₂/SiO₂ composites is subjected for dynamic light scattering (DLS) analysis to understand the particle size, then the X‐Ray diffraction (XRD) to determine the crystal structure and Field emission scanning electron microscopy (FE‐SEM) to characterize its morphology. The TiO₂ nanoparticles are prepared through stober process. The prepared TiO₂ nanoparticles along with MoS₂/SiO₂ composites are fused together in the natural resin for the construction of primary coating mixture (MoS₂/SiO₂/TiO₂). The primary composite coating mixture is coated on the mild steel panels for the analysis. The contact angle analysis is done for the coated mild steel samples to get the insight on its hydrophobicity and the surface smoothness. Further, to perform the corrosion studies, the salt spray analysis is done on the mild steel panels. The MoS₂/SiO₂/TiO₂ ternary heterojunction composite mixture performed well on the anti‐biofouling and anti‐corrosion investigation.

中文翻译：

---

SiO2 / MoS2 / TiO2复合纳米结构的合理构建，可用于防污垢和防腐应用

我们制备了MoS ₂ / SiO ₂ / TiO ₂三元异质结复合材料，用于防腐​​蚀和防污垢应用。通过湿化学工艺合成了二硫化钼（MoS ₂）修饰的二氧化硅（SiO ₂）纳米粒子。将制备的MoS ₂ / SiO ₂复合材料进行动态光散射（DLS）分析以了解粒径，然后进行X射线衍射（XRD）以确定晶体结构并通过场发射扫描电子显微镜（FE-SEM）进行分析。表征其形态。TiO ₂纳米粒子是通过stober工艺制备的。制备的TiO ₂纳米颗粒与MoS ₂ / SiO ₂复合材料一起在天然树脂中融合在一起，用于构建底涂层混合物（MoS ₂ / SiO ₂ / TiO ₂）。将主要的复合涂料混合物涂在低碳钢板上进行分析。对涂层的低碳钢样品进行了接触角分析，以了解其疏水性和表面光滑度。此外，为了进行腐蚀研究，在低碳钢板上进行了盐雾分析。MoS ₂ / SiO ₂ / TiO ₂三元异质结复合混合物在抗生物结垢和防腐研究中表现良好。