当前位置:
X-MOL 学术
›
Energy Environ. Sci.
›
论文详情
Our official English website, www.x-mol.net, welcomes your
feedback! (Note: you will need to create a separate account there.)
Ultralow thermal conductivity in diamondoid lattices: high thermoelectric performance in chalcopyrite Cu0.8+yAg0.2In1−yTe2
Energy & Environmental Science ( IF 32.4 ) Pub Date : 2020-09-09 , DOI: 10.1039/d0ee02323j Hongyao Xie 1, 2, 3, 4 , Shiqiang Hao 2, 3, 4, 5 , Songting Cai 2, 3, 4, 5 , Trevor P. Bailey 4, 6, 7, 8 , Ctirad Uher 4, 6, 7, 8 , Christopher Wolverton 2, 3, 4, 5 , Vinayak P. Dravid 2, 3, 4, 5 , Mercouri G. Kanatzidis 1, 2, 3, 4
Energy & Environmental Science ( IF 32.4 ) Pub Date : 2020-09-09 , DOI: 10.1039/d0ee02323j Hongyao Xie 1, 2, 3, 4 , Shiqiang Hao 2, 3, 4, 5 , Songting Cai 2, 3, 4, 5 , Trevor P. Bailey 4, 6, 7, 8 , Ctirad Uher 4, 6, 7, 8 , Christopher Wolverton 2, 3, 4, 5 , Vinayak P. Dravid 2, 3, 4, 5 , Mercouri G. Kanatzidis 1, 2, 3, 4
Affiliation
Because of its unique transport properties, CuInTe2 has been considered as a promising p-type material for thermoelectric applications. However, its diamondoid structure gives it a high intrinsic lattice thermal conductivity that greatly limits its thermoelectric performance. In this study, we demonstrate that Ag alloying gives rise to an extremely low lattice thermal conductivity of 0.47 W m−1 K−1 for Cu0.8Ag0.2InTe2 at 850 K. Moreover, we found Cu doping significantly improves the carrier mobility while simultaneously increasing the carrier concentration. As a result, the power factor of Cu0.8Ag0.2InTe2 increases and a maximum ZT of ∼1.6 is achieved at 850 K. Both DFT calculations and low temperature heat capacity measurements suggest a strong interaction between low frequency optical phonons and heat carrying acoustic phonons, which is derived from the weak Ag–Te bonding. This strong phonon coupling decreases the Debye temperature and induces a low sound velocity.
中文翻译:
菱形晶格中的超低导热系数:黄铜矿Cu0.8 + yAg0.2In1-yTe2中的高热电性能
由于其独特的传输性能,CuInTe 2被认为是用于热电应用的有前途的p型材料。但是,其类金刚石结构使其具有很高的固有晶格热导率,从而极大地限制了其热电性能。在这项研究中,我们证明了Ag合金化对于850 K时的Cu 0.8 Ag 0.2 InTe 2产生的晶格热导率极低,为0.47 W m -1 K -1。此外,我们发现Cu掺杂显着改善了载流子迁移率同时增加载流子浓度。结果,Cu 0.8 Ag 0.2 InTe 2的功率因数DFT计算和低温热容测量均表明,低频光学声子与载热声子之间有很强的相互作用,这是由弱的Ag-Te键合引起的,并且在850 K时最大ZT约为1.6。这种强声子耦合会降低德拜温度,并导致较低的声速。
更新日期:2020-10-14
中文翻译:
菱形晶格中的超低导热系数:黄铜矿Cu0.8 + yAg0.2In1-yTe2中的高热电性能
由于其独特的传输性能,CuInTe 2被认为是用于热电应用的有前途的p型材料。但是,其类金刚石结构使其具有很高的固有晶格热导率,从而极大地限制了其热电性能。在这项研究中,我们证明了Ag合金化对于850 K时的Cu 0.8 Ag 0.2 InTe 2产生的晶格热导率极低,为0.47 W m -1 K -1。此外,我们发现Cu掺杂显着改善了载流子迁移率同时增加载流子浓度。结果,Cu 0.8 Ag 0.2 InTe 2的功率因数DFT计算和低温热容测量均表明,低频光学声子与载热声子之间有很强的相互作用,这是由弱的Ag-Te键合引起的,并且在850 K时最大ZT约为1.6。这种强声子耦合会降低德拜温度,并导致较低的声速。