当前位置: X-MOL 学术Mar. Pollut. Bull. › 论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Sorption of 3,6-dibromocarbazole and 1,3,6,8-tetrabromocarbazole by microplastics.
Marine Pollution Bulletin ( IF 5.3 ) Pub Date : 2019-01-21 , DOI: 10.1016/j.marpolbul.2018.11.055
Xiaojun Zhang 1 , Minggang Zheng 2 , Xiaocai Yin 1 , Ling Wang 1 , Yinghua Lou 1 , Lingyun Qu 2 , Xiaowen Liu 1 , Huihui Zhu 1 , Ying Qiu 1
Affiliation  

Microplastics and organic pollutants are typical contaminants in the marine environment. However, little is known about their interactions. In this study, the sorption of 3,6-Dibromocarbazole(3,6-BCZ) and 1,3,6,8-Tetrabromocarbazole (1,3,6,8-BCZ) by Polypropylene microplastic in simulated seawater was studied. Factors, including particle size, salinity and concentration, were investigated, and the experimental results were simulated using a mathematical model. Results showed that the pseudo-second-order kinetic model was more suitable to describe the sorption of polyhalogenated carbazole by microplastics, with equilibrium sorption times of 6 h and 8 h for 3,6-BCZ and 1,3,6,8-BCZ, respectively. Sorption capacity increased with decreasing particle size and the adsorption capacity increased initially and then decreased with increasing salinity, with a maximum sorption occurring at salinity of 14%. Moreover, the sorption amount increased with the increasing concentration of polyhalogenated carbazole. The sorption isotherms were confirmed as the extended Langmuir model and the extended Freundlich model, both of which were S-type.

中文翻译:

微塑料吸附 3,6-二溴咔唑和 1,3,6,8-四溴咔唑。

微塑料和有机污染物是海洋环境中的典型污染物。然而,人们对它们的相互作用知之甚少。本研究研究了聚丙烯微塑料在模拟海水中对3,6-二溴咔唑(3,6-BCZ)和1,3,6,8-四溴咔唑(1,3,6,8-BCZ)的吸附作用。研究了颗粒大小、盐度和浓度等因素,并使用数学模型模拟了实验结果。结果表明,拟二级动力学模型更适合描述微塑料对多卤代咔唑的吸附,3,6-BCZ和1,3,6,8-BCZ的平衡吸附时间分别为6 h和8 h。 , 分别。吸附容量随着粒径的减小而增加,吸附容量随着盐度的增加先增加后减小,最大吸附发生在盐度为 14% 时。此外,吸附量随着多卤代咔唑浓度的增加而增加。吸附等温线被证实为扩展的 Langmuir 模型和扩展的 Freundlich 模型,两者均为 S 型。
更新日期:2018-12-06
down
wechat
bug