课题组代表性论文成果：

1. 储双杰; 毛博; 胡广魁； 汽车用先进高强度冷轧双相钢的显微组织调控和强韧化机理；金属学报,  2022, 58(4), 401-416.

2. 储双杰; 汤文杰; 梁高飞; 姜正连；吉帕钢冷轧板形及厚度精度控制技术研究; 轧钢,  2022, 39(2), pp.51-56.

3. 储双杰; 金鑫焱; 毕文珍; 内氧化对热镀锌高强钢镀层/基板界面的影响; 钢铁, 2021, 56(12): 126-133.

4. 储双杰; 杨勇杰; 和正华; 沙玉辉; 左良; 基于磁畴结构交互作用的激光刻痕取向硅钢磁致伸缩系数计算; 金属学报, 2019, 55(3): 362-368.

5. 储双杰; 吴人洁; 魏朋义; 李建国; 傅恒志; 定向凝固 Al2O3/Al-4.5Cu 复合材料的弯曲性能与断裂特征; 科学通报 43, no. 9 (1998): 995-102.

6. Shuangjie Chu and Renjie Wu. "The structure and bending properties of squeeze-cast composites of A356 aluminium alloy reinforced with alumina particles." Composites science and technology 59.1 (1999): 157-162.

7. Shuangjie Chu, Haowei Wang, and Renjie Wu. "Investigation on the properties of carbon fibre with C-Si functionally graded coating." Surface and Coatings Technology 88.1-3 (1997): 38-43.

8. Shuangjie Chu, Jianguo Li, Zhongyuan Liu, Zhengxing Shi, and Hengzhi Fu. "On morphologies, microsegregation, and mechanical behavior of directionally solidified cobalt-base superalloy at medium cooling rate." Metallurgical and Materials Transactions A 25, no. 3 (1994): 637-642.

9. Shuangjie Chu and Renjie Wu. "Relations between interface of CF/Al-4.5 Cu composite and solidification processing." TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA 7, no. 2 (1997): 132-136.

10. Shaungjie Chu, Jianguo Li, Zhongyuan Liu, Zhengxing Shi, Hengzhi Fu. "Alloy Morphology Under Superhigh Speed Directional Solidification." Transactions of the Nonferrous Metals Society of China(China) 2, no. 4 (1992): 66-69

11. Yujie Wang, Shuangjie Chu, Bo Mao*, Hui Xing, Jiao Zhang, and Baode Sun. "Microstructure, residual stress, and mechanical property evolution of a spray-formed vanadium-modified high-speed steel processed by post-heat treatment." Journal of Materials Research and Technology 18 (2022): 1521- 1533. https://doi.org/10.1016/j.jmrt.2022.03.053 
12. Shuangjie Chu, Bo Mao*, and Guangkui Hu. "Microstructure Control and Strengthening Mechanism of High Strength Dual Phase Steels for Automobile Applications." Acta Metallurgica Sinica (2022): 551- 566. https://doi.org/10.11900/0412.1961.2022.00061
13. 
    

课题组代表性专利成果：

1. ZL201810303841.8一种耐热磁畴细化型取向硅钢及其制造方法

2. ZL201810095479.X 一种耐消除应力退火的低铁损取向硅钢的制造方法

3. ZL201010563156.2 热浸耐蚀镀锌层

4. ZL201110021938.8 Zn-Al-Mg-RE 锌锭制备方法

5. ZL03150582.1 磁悬浮长定子用电工钢板的生产方法

6. ZL03115928.1 电工钢自粘接涂层的涂敷方法