2023
1. A latened catalytic strategy for low cure thermoset powder coating by post-dry-blending technique. Progress in Organic Coatings 185, 107922.
2. Boosting flowability and curing reaction of ultra-fine powder coatings using facile-fabrication Al2O3/C4H6N2 nanocomposite. Progress in Organic Coatings 185, 107836.
3. A durable superhydrophobic coating based on inherent nano/micro-integrated materials. Progress in Organic Coatings 184, 107854.
4. Synergistic Effect of Nanoclay and Barium Sulfate Fillers on the Corrosion Resistance of Polyester Powder Coatings. Coatings 13 (10), 1680.
5. A melting pre-bonding method for fabrication of mechanical-robust superhydrophobic powder coatings. Progress in Organic Coatings 182, 107680.
6. Activation of silver nanoparticles by hydrophilic encapsulation for antimicrobial powder coated surfaces. Progress in Organic Coatings 182, 107615.
7. Study on the Self-Repairing Effect of Nanoclay in Powder Coatings for Corrosion Protection. Coatings 13 (7), 1220.
8. Enhanced flowability and film properties of ultrafine powder coatings modulated by modified flow additive.Progress in Organic Coatings 179, 107483.
9. Fabrication of Nano-Silver–Silver Ion Composite Antibacterial Agents for Green Powder Coatings. Coatings 13 (3), 575.
10. Ultrafine powder coating: Smooth surface, dense structure and enhanced corrosion resistance. Chemical Engineering Journal 455, 140815.
11. Laser-driven NIR light source based on MgO: Cr3+, Ni2+ phosphor-in-glass film for NIR spectroscopy application[J]. Journal of Materials Chemistry C, 2023, 11, 9014-9022.
12. Valence state control of Cr4+-activated Li2SrGeO4 for NIR-II light source to distinguish deuterium and non-deuterium reagents. Journal of Materials Chemistry C. 2023, 11(23): 7611-7618.
13. Reprocessable thermal interface materials with optimized phonon transport based on Diels-Alder click chemistry. Composites Part A: Applied Science and Manufacturing 2023, 171, 107563.
2022
1. Experimental and Calculational Study on Effects of Flow Additive on Flowability of Fine Coating Particles. Processes 2022, 11 (1), 2.
2. In situ burning of crude oils using iron oxide nanoparticles as additives. Fuel 2022, 330, 125568.
3. A Novel Method to Formulate Pigmented Powder Coatings by Ultrafine Powders. Powders 2022, 1 (4), 221-230.
4. Comparative Study of Carbonaceous and Polymer Conductive Additives on Anticorrosion Performance of Epoxy Zinc-Rich Primer. Coatings 2022, 12 (10), 1473.
5. Fabrication of a Conductive Additive for the Anticorrosion Enhancement of Zinc-Rich Epoxy Coatings. Coatings 2022, 12 (10), 1406.
6. A Mechanistic Study on the Anti-Corrosive Performance of Zinc-Rich Polyester/TGIC Powder Coatings. Processes 2022, 10 (9), 1853.
7. Extrusion-free fabrication of zinc-rich powder coatings: Press bonding. Chemical Engineering Journal 2022, 442, 135925.
8. A core-shell composite pigment with rutile TiO2 intensification for UV inhibition. Particuology 2022, 67, 18-26.
9. Fabrication of Nano TiO2-Polymer Encapsulated Fluorescent Pigments for Weatherability Improvement of Powder Coating. Coatings 2022, 12 (3), 315.
10. A comparative study on the anti-corrosive performance of zinc phosphate in powder coatings. Coatings 2022, 12 (2), 217.
11. Fabrication of Nano TiO2-Polymer Encapsulated Fluorescent Pigments for Weatherability Improvement of Powder Coating. Coatings 2022, 12, 315.
12. An investigation into the effect of particle size distribution on the fluidization behavior of Group C and Group A particles. Powder Technology 2022, 398, 117142.
13. Ni2+-activated MgTi2O5 with broadband emission beyond 1200 nm for NIR-II light source applications. Journal of Materials Chemistry C. 2022, 10(48): 18234.
14. A High-efficiency blue-LED-excitable NIR-II-emitting MgO:Cr3+,Ni2+ phosphor for future broadband light source toward multifunctional NIR spectroscopy applications. Chemical Engineering Journal. 2022, 452: 139313.
15. A Super-Broadband NIR Dual-Emitting Mg2SnO4:Cr3+, Ni2+ Phosphor for Ratiometric Phosphor-Converted NIR Light Source Applications. Advanced Materials Technologies. 2022, 8(4): 2201181.
16. Ultra-broadband and high-efficient phosphors to brighten NIR-II light source applications. Cell Reports Physical Science. 2022, 3(10): 101078.
17. A simple and generic post-treatment strategy for highly efficient Cr3+-activated broadband NIR emitting phosphors for high-power NIR light sources. Journal of Materials Chemistry C. 2022, 10(22): 8797-8805.
18. In-situ construction of dense thermal conduction networks endow the polymeric composites with advanced thermal management capability and superior dielectric properties. Chemical Engineering Journal 2022, 449, 137753.
19. Pyrene-Functionalized Alkali Lignin to Disperse Hydroxylated Boron Nitride Nanosheets in Cellulose Nanofibers for Thermal Management. ACS Applied Nano Materials 2022, 6 (1), 200-211.
20. Enhanced thermal conductivity and fire safety of flexible hybrid film via synergistic effects between boron nitride and functionalized graphene. Journal of Thermal Analysis and Calorimetry 2022, 147 (6), 4047-4058.
2021
1. Development of a novel silver ions-nanosilver complementary composite as antimicrobial additive for powder coating. Chemical Engineering Journal 2021, 420, 127633.
2. Facile in-situ fabrication of nanocoral-like bimetallic Co-Mo carbide/nitrogen-doped carbon: a highly active and stable electrocatalyst for hydrogen evolution. Journal of Materials Science 2021, 56, 11894-11906.
3. Development of a novel graphitic carbon nitride and multiwall carbon nanotube co-doped Ti/PbO2 anode for electrocatalytic degradation of acetaminophen. Chemosphere 2021, 271, 129830
4. Produce various powder coated surfaces with stable metal shine via microwave energy. Progress in Organic Coatings 2021, 154, 106199.
5. Co/Sm-modified Ti/PbO2 anode for atrazine degradation: Effective electrocatalytic performance and degradation mechanism. Chemosphere 2021, 268, 128799.
6. Bi12NiO19 micro-sheets grown on graphene oxide: Temperature-dependent facile synthesis and excellent electrochemical behavior for supercapacitor electrode. Journal of Electroanalytical Chemistry 2021, 884, 115075.
7. Recent progresses of superhydrophobic coatings in different application fields: An overview. Coatings 2021, 11 (2), 116.
8. Low-dose X-ray-stimulated LaGaO3: Sb, Cr near-infrared persistent luminescence nanoparticles for deep-tissue and renewable in vivo bioimaging. Chemical Engineering Journal 2021, 404, 127133.
9. Low-Dose X-ray stimulated LaGaO3:Sb,Cr Near-infrared Persistent Luminescence Nanoparticles for Deep-Tissue and Renewable in Vivo Bioimaging. Chemical Engineering Journal. 2021, 404, 127133-127142.
10. X-ray-activated, UVA persistent luminescent materials based on Bi-doped SrLaAlO4 for deep-Seated photodynamic activation. Journal of Applied Physics. 2021, 129(12), 120901-120910.
11. Enhanced thermal conductivity of bio-based epoxy-graphite nanocomposites with degradability by facile in-situ construction of microcapsules. Composites Part B: Engineering 2021, 218, 108936.
12. Highly thermal conductivity and flame retardant flexible graphene/MXene paper based on an optimized interface and nacre laminated structure. Composites Part A: Applied Science and Manufacturing 2021, 141, 106227.
13. Enhanced thermal conduction of functionalized graphene nanoflake/polydimethylsiloxane composites via thermoluminescence strategy. Composites Science and Technology 2021, 213, 108940.
14. Ultrahigh thermal conductivity of epoxy composites based on curling bioinspired functionalized graphite films for thermal management application. Composites Part A: Applied Science and Manufacturing 2021, 146, 106413.
2020
1. Solvent-free fabrication of robust superhydrophobic powder coatings. ACS Applied Materials & Interfaces 2020, 13 (1), 1323-1332.
2. Thermal decomposition based fabrication of dimensionally stable Ti/SnO2–RuO2 anode for highly efficient electrocatalytic degradation of alizarin cyanin green. Chemosphere 2020, 261, 128201.
3. Applying microwave energy to fabricate powder coatings with strong and stable metal shine. Progress in Organic Coatings 2020, 149, 105929.
4. Spherical phosphomolybdic acid immobilized on graphene oxide nanosheets as an efficient electrochemical sensor for detection of diphenylamine. Microchemical Journal 2020, 158, 105158.
5. Nanocoral-like NiSe2 modified with CeO2: A highly active and durable electrocatalyst for hydrogen evolution in alkaline solution. International Journal of Hydrogen Energy 2020, 45 (53), 28682-28695.
6. Investigation of the performance of fumed silica as flow additive in polyester powder coatings. Coatings 2020, 10 (10), 977.
7. Fabrication of Co/Pr co-doped Ti/PbO2 anode for efficiently electrocatalytic degradation of β-naphthoxyacetic acid. Chemosphere 256, 127139.
8. Preparation of aluminium metallic pigmented powder coatings with high color stability using a novel method: Microwave bonding. Progress in Organic Coatings 2020, 147, 105787.
9. Facile one-pot synthesis of binder-free nano/micro structured dendritic cobalt activated nickel sulfide: a highly efficient electrocatalyst for oxygen evolution reaction. International Journal of Hydrogen Energy 2020, 45 (38), 19304-19312.
10. Correction to “Fabrication of Ag+, Cu2+, and Zn2+ Ternary Ion-Exchanged Zeolite as an Antimicrobial Agent in Powder Coating”. Industrial & Engineering Chemistry Research 2020, 59 (30), 13852-13852.
11. Facile one-step synthesis of tunable nanochain-like Fe–Mo–B: A highly efficient and stable catalyst for oxygen evolution reaction. Journal of Alloys and Compounds 2020, 822, 153517.
12. Tunably fabricated nanotremella-like Bi2S3/MoS2: An excellent and highly stable electrocatalyst for alkaline hydrogen evolution reaction. International Journal of Hydrogen Energy 2020, 45 (16), 9535-9545.
13. A drag model considering the particle size distribution via multi-subgrid for the simulation of downer. Chemical Engineering Science 2020, 214, 115363.
14. Short rod-like Ni-MOF anchored on graphene oxide nanosheets: A promising voltammetric platform for highly sensitive determination of p-chloronitrobenzene. Journal of Electroanalytical Chemistry 2020, 861, 11395.
15. Tailored manganese hexacyanoferrate/graphene oxide nanocomposites: One-pot facile synthesis and favorable capacitance behavior for supercapacitors. Journal of Materials Science: Materials in Electronics 2020, 31, 2720-2728.
16. Identification of regime transition from bubbling to turbulent fluidization through dynamic phase tracking method. Powder Technology 2020, 360, 534-548.
17. Hydrodynamics and mechanism of hydrophobic foam column tray: Contact angle hysteresis effect. AIChE Journal 2020, 66 (1), e16793.
18. Vertically aligned dopamine-reduced graphene oxide with high thermal conductivity for epoxy nanocomposites. Journal of materials science 2020, 55, 8917-8929.
19. Casein phosphopeptide-biofunctionalized graphene oxide nanoplatelets based cellulose green nanocomposites with simultaneous high thermal conductivity and excellent flame retardancy. Chemical Engineering Journal 2020, 382, 122733.
2019
1. Fabrication of Ag+, Cu2+, and Zn2+ Ternary Ion-Exchanged Zeolite as an Antimicrobial Agent in Powder Coating. Industrial & Engineering Chemistry Research 2019, 59 (2), 751-762.
2. Electrodeposited NiO/graphene oxide nanocomposite: an enhanced voltammetric sensing platform for highly sensitive detection of uric acid, dopamine and ascorbic acid. Journal of Electroanalytical Chemistry 2019, 852, 113516.
3. Application of Phase Transfer Catalysis in the Esterification of Organic Acids: The Primary Products from Ring Hydrocarbon Oxidation Processes. Catalysts 2019, 9 (10), 851.
4. Mechanism analysis of the solids holdup variations in downer reactors based on volumetric flux. Chemical Engineering Science 2019, 205, 259-268.
5. Comparative Study of the Performances of Al(OH)3 and BaSO4 in Ultrafine Powder Coatings. Processes 2019, 7 (5), 316.
6. Synthesis of fluorinated polyacrylic acrylate oligomer for the UV-curable coatings. Journal of Coatings Technology and Research 2019, 16, 681-688.
7. Shape recovery strain and nanostructures on recovered polyurethane films and their regulation to osteoblasts morphology. Journal of the Mechanical Behavior of Biomedical Materials 2019, 92, 128-136.
8. Reducing comminution over-grinding of powder coatings with modified grinding pins in an air classifier mill. Powder Technology 2019, 344, 36-45.
9. Investigation of the performance of ATH powders in organic powder coatings. Coatings 2019, 9 (2), 110.
10. A Density Functional Theory Study on the Acid‐Catalyzed Transesterification Mechanism for Biodiesel Production from Waste Cooking Oils. Journal of the American Oil Chemists' Society 2019, 96 (2), 137-145.
11. Theoretical insights into photo-induced electron transfer at BiOX (X= F, Cl, Br, I) (001) surfaces and interfaces. Physical Chemistry Chemical Physics 2019, 21 (2), 868-875.
12. Significantly enhanced thermal conductivity in polyvinyl alcohol composites enabled by dopamine modified graphene nanoplatelets. Composites Part A: Applied Science and Manufacturing 2019, 117, 134-143.
13. Anisotropic thermal conductivity and electromagnetic interference shielding of epoxy nanocomposites based on magnetic driving reduced graphene oxide@Fe3O4. Composites Science and Technology 2019, 174, 1-10.
2018
1. Fabrication and analysis of antimicrobial additives for powder coated surface. Progress in Organic Coatings 2018, 127, 308.
2. Functionalization of multiwalled carbon nanotubes by amidation and Michael addition reactions and the effect of the functional chains on the properties of waterborne. Journal of Applied Polymer Science 2018, 135 (42), 46757.
3. Cold Bonding Method for Metallic Powder Coatings. Materials 2018, 11 (2086).
4. Optimized design of novel Pt decorated 3D BiOBr flower-microsphere synthesis for highly efficient photocatalytic properties. Chemical Papers 2018, 72, 2413-2423.
5. Potential-induced reversible uptake/release of perchlorate from wastewater by polypyrrole@CoNi-layered double hydroxide modified electrode with proton-ligand effect. Journal of colloid and interface science 2018, 523, 159-168.
6. Preparation of hydroxyl and (3‐aminopropyl) triethoxysilane functionalized multiwall carbon nanotubes for use as conductive fillers in the polyurethane composite. Polymer Composites 2018, 39 (4), 1212-1222.
7. DFT + U predictions: structural stability, electronic and optical properties, oxidation activity of BiOCl photocatalysts with 3d transition metals doping. Journal of materials science 2018, 53, 4494-4506.
8. Transformation of Perovskite BaBiO3 into Layered BaBiO2.5 Crystals Featuring Unusual Chemical Bonding and Luminescence. Chemistry - A European Journal. 2018, 24(35): 8875-8882.
